Instrumenter - side 9

Testprobe blå = 140mm

Metrel MI2093 Line Tracer is a complete cable tracer kit, for tracing on hidden cables and wires. The kit consists of a transmitter unit, which can be used on installations with and without present voltage, and a receiver with adjustable sensivity. The transmitter is forced by batteries and can be used to trace/follow cables both with and without voltage. Line Tracer will easily find a disconnected wire, plugs, sockets and more. If you connected to a cable with present voltage is it possible to follow/identify the cable throughout the net supply. The tracer will indikate if it is working on an installation with or without voltage, and if the battery voltage is to low. The receiver indicates how strong a signal it will catch reflected by diods og by sound signals. On the receiver is it possible to choose between three levels of sensivity, this will secure a more accurate tracing. With the special designed selective/high sensitive probe, you are able to identify fuses in boards

SparOmeteret er en energimåler som kan kobles direkte i stikkontakten, og vil enkelt vise energiforbruket på alle 230V apparater opp til 2300W/10A. Måleren har mange funksjoner: V, A, W, min.W, max.W, kWh og driftstid. SparOmeteret kan settes til å måle over en periode på 1, 7 eller 30 dager eller kontinuerlig. Måleren vil huske verdiene når den blir frakoblet. Tekniske data: Spenningsområde: 230V AC Strømområde: 10A AC Effektområde: 2300W Nøyaktighet: Klasse2 Størrelse:138x69x75 mm Vekt :180 g

Type 5004, ekstra kraftig, isolert krokodilleklemme, 1000V/20A. Tekniske data: IEC 61010: Cat III 1000V

Type 1060, flerbladet 4 mm bananstøpsel for skrufesting, 36A. Tekniske data: IEC 61010: 33V AC / 70V DC

Røde 100cm kvalitetstestledninger med fast hette, dobbeltisolert høy fleksibel silikon, 0,75 mm2 12A med isolerte stablingsbare 4 mm sikkerhetsbananplugger. Tekniske data: IEC 61010: CAT III 1000V, CAT IV 600V

Testprobe svart = 140mm

The EASYTEST kit, is a combination of a tone transmitter and a inductive trace probe. The trace probe is easy to use and solves problems in searching, identifying and trace cable installations. EASYTEST is able to find insulated cables on distances up to 60 cm, and is able to follow the cables up to 15 km. The instrumentet is able to trace/finding cables, split pairs, pairs, reversed pairs, short curcuits, disconnected leads and more. EASYTEST is an ideal instrument for the telecommunication/network installer tracing a single wirepair, the alarm installer who has to trace the cable route to the alarm system, the electrical installer who has to trace the cabling in a building and more. EASYTEST is used a vary of apllications where it is not possible to find a cable/wire phusical or visual. EASYTEST is even more equipped with two Talk-sets and is therefore able to use two way communication in systems up to 15 km. a very userable feature in places, where it s not possible to use walkie-talkies or mobile phones. Easytest can be conencted via the RJ 11 connector or the supplied crocodile clips. Technical data: Voltage protection: 110V AC/240V DC Range: 15 km Battery transmitter: 1x9V 6F22 (excl.) Battery receiver: 1x9V 6F22 (excl.) Size/weight transmitter: 68 x 96 x 25 mm / 150 g Size/weight receiver: 220 x 40 x 25 mm / 80 g

Testprobe for tilkobling i enden av en testledning med bananstikk. Spesielt egnet for bruk i flerinstallasjonstestere. Tekniske data: IEC 61010: CAT II 1000V (uten beskyttelseshette), CAT IV 600V (med beskyttelseshette)

En par (rød, svart) av slanke probekropper for å undersøke tett plasserte eller innfelte terminaler. Harde rustfrie ståltipper på 2 mm diameter for elektronisk arbeid. CAT II 1000 V, 10 A rating

Gi dine Fluke-verktøy den beskyttelsen de fortjener. Du kjøpte det beste, hvorfor ikke beskytte dem med Fluke-etuier. C25-bærevesken er en slitesterk, glidelås bæreveske med polstring og innvendig lomme, og høy kvalitet polyester eksteriør. Den inkluderer en praktisk håndstropp og bærer de fleste av Flukes populære digitale multimeterne. Vår mest populære sak solgt til dags dato! Nå tilgjengelig i standard- og kamuflasjedesignDimensjoner (HxBxD) 218 mm x 128 mm x 64mm

Now compatible with Fluke ConnectTM Mobile App The 289 is the next generation high performance industrial logging multimeter designed to solve complex problems in electronics, plant automation, power distribution, and electro-mechanical equipment. With the ability to log data and review it graphically on-screen, you can solve problems faster and help minimize downtime. Let the new 289 be your watchdog for systems or processes while you are off doing other jobs. Now communicate wirelessly with your iOS and Android smart devices with the Fluke Connect mobile app and ir3000 FC wireless connector (sold separately).NEW – Let your team see what you see in an instant with ShareLiveTM video call (requires Fluke Connect mobile app and ir3000 FC wireless connector).TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.Zoom on trend provides unprecedented ability to view and analyze TrendCapture data, zoom in up to 14 times.Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.Large 50,000 count, 1/4 VGA dot matrix display with white backlight.Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.Save multiple logging sessions before PC download is necessary.Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when

Standardprobe - Type K Ni-CrNi. Proben leveres med spiraltråd og isolert håndtak. Tekniske data: Måleområde: -50....maks +450°C Størrelse: 130x5 mm

Blå 100cm kvalitetstestledninger med fast hette, dobbeltisolert høy fleksibel silikon, 0,75 mm2 12A med isolerte stablingsbare 4 mm sikkerhetsbananplugger. Tekniske data: IEC 61010: CAT III 1000V, CAT IV 600V

Universell strømadapter for ulike instrumenter.

Trådsensor Type-K for 4mm bananplugger

Sikring 400mA, 6x32mm, 1000V, for: Elma 251sElma 257sElma 319sElma 805sElma 807sElma 878

Med denne smarte magnetiske proben låser testledningen seg automatisk til målepunktet uten bruk av verktøy og uten å løsne klemmer. Passer til 4mm busk på standard 4mm spor. Elma Magnetic Test Probe overholder IEC 61010-1 CAT II 1000V

Application: Metal detection, wood detection, AC detection, cavity detection (max. 24 mm)

Kewmate 2012R is the top model in the series of smart pocket multi meters with open current clamp. The instrumentet is offering new functions and is equipped with True RMS measurement, automatical DC zero adjustment on current measurement, and a new and bigger clamp which is able for measuring all up to 120A AC/DC. Kewmate 2012R has a big display which is easy to read on, with analog bargraph, and it measures voltage, current, resistance, continuity, frequency, and is equipped with automatical range selection, data hold, and auto shut off. The instrumentet is in pocket size, and is delivered with a robust rubber protection, where the test leads and the current clamp can be mounted seperately, and then be protected. The instrumentet complies with IEC 61010-1 CAT III 300V, and is delievred with test leads, current clamp, rubber protection, batteries and manual. Technical data: Voltage DC: 0-600m-6-60-600 V Voltage AC: 0-6-60-600 V Current AC/DC: 0,01-60-120.0A (with clamp) Resistance: 0-600-6k-60k-600k-6M-60M Frequency: 0-10-100-1000-10k-100k-1000k-10MHz Capacity: 0-40n-400n-4-40-4000F Clamp size: ø12 mm Max display: 5999 Battery: 2x1,5V LR03 (incl.) Size: 126x87x21 mm Weight: 210 g

HT126A is a smart and rugged multimeter from Habotest. It is distinguished by its precision measurement, you can also use it outdoors. Equipped with a large display and silicone buttons - it is simple and comfortable to use. Compact and lightweight - it also has a LED flashlight, which allows you to work even in dark places. It requires 4 AAA 1.5V batteries to power it. However, these are not included and must be purchased separately. You can use it to measure voltage, resistance, capacitance, etc.

Neozed DO1 fuse, 10A, 5 pcs.

Habotest HT651D infrared thermometer guarantees unparalleled precision of measurement. With its help you not only measure the temperature of a specific point, but also check the ambient temperature, dew point and relative humidity. The color display makes working with the device easy and the included K-type thermocouple gives even more possibilities. The thermometer also has an alarm function. It requires a 9V 6F22 battery to power it, which must be purchased separately.

Neozed D01 Fuse 10A, 10 pcs.

Diazed DII Fuse 16A, 5 pcs.