Instrumenter

FNIRSI 2C53T is a multifunctional portable device that combines a digital oscilloscope, multimeter, and signal generator in one compact housing. The dual-channel 50 MHz oscilloscope with 250 MSa/s sampling rate ensures precise waveform analysis, while the built-in multimeter supports a wide range of electrical measurements up to 19999 counts. A 2.8-inch color display, advanced trigger modes, and a rugged ABS housing make the device suitable for workshop, laboratory, and field diagnostics. The integrated 50 kHz signal generator and rechargeable 3000 mAh battery further enhance its versatility for electronics testing and troubleshooting.

StudSensor HD70 OneStep stud finder har en lys, bakgrunnsbelyst LCD-skjerm og Target Spotlight som lyser opp på skjermen når du har funnet midten av en stender. En lav batteriindikator informerer deg også når batteriet bør byttes ut for optimal ytelse. To stender scan-moduser finner midten, kantene og retningen til tre- og metallstendere samtidig som de varsler deg om tilstedeværelsen av live AC elektrisk ledning.

Elma DT-128M gir en veldig rask måte å ikke-destruktiv måling av fuktighet i byggematerialer og fuktdistribusjon i for eksempel vegger, tak og gulv. Instrumentet injiserer et høyfrekvent signal i materialet og måler fukten 20-40mm n i materialet. Bare hold ballspissen mot overflaten, så vises fukten umiddelbart på den store, bakbelyste skjermen. Elma DT-128M er utstyrt med 2 justerbare alarmgrenser, automatisk nulljustering, min / maks-, automatisk avstenging og displayhold. Instrumentet leveres klart til bruk inkludert batterier og manual. Merk: Materialet som skal måles bør være minst 20-40 mm (avhengig av materialet) for å gi en lesning.

Røykpenne inkludert 6 røykpinner. Brennetid: 30 min/pinne

The Ancel AD310/AC103 scanner is an advanced diagnostic tool that allows you to quickly and efficiently identify technical problems in your vehicles. It is ideal for drivers who want to monitor the technical condition of their car on their own, as well as for professionals looking for reliable equipment for everyday work.

Elma BM 251 is a new handy multi meter with a lot of funktions and build-in PC-communication. The instrument measures current, voltage, frequency, resitance and continuity. The instrument has build-in non contact detecting of electrical fields, which can be used for detecting electromagnetical fields from PC screens or as non contact voltage detector. Elma BM 251 has optional automatical/manual range selection, intelligent auto power off, relative measurement, and data hold. With THe PC-communication and Windows software (extra accessorie) is it possible to make ON-Line data logging. The instrument is warning against misconnection and has hogh effective fuses. Complies with IEC 61010-1 CAT III 600V and is delivered incl. rubber protection, test leads, batteries and manual. Technical data: Voltage: 0-60m-600m-6-60-600-1000V AC/DC Accuracy: DC: ± 0,5%+2D, AC: ± 1,%+3D Current: 0-500-5000-50m-500m-5-10A AC/DC Accuracy: DC: ± 0,5% + 3D, AC: ± 1,0% + 3D Resistance: 0-600-6k-60k-600k-6M-60M (600V) Frequency: 10Hz - 50kHz Display: 3 5/6 digits Max. display: 5999 Battery: 2x1,5V LR03 (inkl.) Size: 161 x 80 x 50 mm Weight: 340 g

Fluke T5-H5-1AC II KitThis kit includes:Fluke T5-1000Fluke 1AC IIH5Kits ComponentsH5Electrical Tester Holster (Fluke T3/T5)Fluke 1AC IIVoltAlert Voltage DetectorVoltbeatTM technology and continuous self-test so you always know it's workingUpon detection of voltage, tip glows and beeper soundsCAT IV 1000 V for added protectionExpanded range: 90 V to 1000 V acFluke T5-10001000V Voltage, Continuity and Current TesterAll models include:4 mm detachable probes

Elma Laser x360-3 med 3 stk. 360 grønne linjer for ekstra synlighed Produkt beskrivelse: Nu har du chancen for at få en high-end 3D laser, med 3 stk....

The FNIRSI S1 is a digital multimeter designed for accurate and versatile electrical measurements in both professional and DIY environments. It supports AC/DC voltage measurement, resistance, continuity testing, frequency detection, battery capacity measurement and temperature reading. Additional functions include NCV (non-contact voltage detection), diode testing, phase and neutral wire identification and True RMS measurement for more accurate readings of non-linear signals. The device features a clear inverted VA HD display for easy readability, along with automatic range selection, data hold and overload protection. A built-in 1000 mAh rechargeable battery with USB-C charging ensures convenient and portable operation.

fuse440mA(F), 1000V, 10kA,

The Ancel BM200 is an innovative Bluetooth car battery tester that allows users to easily track battery health by connecting to a mobile app on iOS and Android devices. Equipped with Bluetooth 4.0, the BM200 provides a reliable and fast connection, allowing the user to access detailed battery diagnostic data.

Always on for faster, safer voltage testing2AC is the latest addition to the VoltAlertTM ac non- contact voltage tester family from Fluke and is designed to be pocket-sized and easy to use. The 2AC tests for energized circuits and defective grounds, whether it’s for an electrician on the factory floor or the do-it-yourselfer around the house. The tip of the pocket-sized tester will glow red when within close proximity of an outlet, terminal strip, or power cord where voltage is present.Voltage detection from 200 to 1000 V ac, suitable for a wide range of residential, commercial and industrial needs.NEW! Always on, using special low power circuitry to sustain battery life and ensure your 2AC is always ready.NEW! Innovative ‘Battery Check’ button function ensures battery is in good condition*Category IV – 1000 V overvoltage rated product for best in class user protectionIntegrated clip design, optimized for pocket storagePowered by 2x AAA batteries (included)Fluke ruggedness and reliability

Diazed sikring DZ II 25A, 5 stk

Elma BM2805 Multimeter, sand RMS Produkt beskrivelse: Elma BM2805 er et robust, sand RMS multimeter med bagbelyst LED-display samt max- og datahold. I...

Elma 2700X spændingstester med åben strømtang Produkt beskrivelse: Med Elma 2700X genopfinder Elma spændingstesteren, endnu engang. Elma 2700X har all...

Elma 2200X spændingstester Robust med 30mA belastningstest Produkt beskrivelse: Med Elma 2200X genopfinder Elma spændingstesteren, endnu engang. Elma...

FNIRSI GC-01 stråling detektor

Elma 106 indikerer AC spenning uten behov for berøring. Når spenningen er til stede (fase), indikeres det ved tilstedeværelsen av en kraftig og klar oransje lys. Elma 106 er ideell for overvåking: - Sikringer - Sikre kontakter uten separasjon. - Kabler og ledninger, bruk den til å søke etter trådbrytningspunkter. Elma 106 oppfyller EN 61010-1 CAT III 1000V/KAT IV 600V og leveres komplett med veiledning og batterier. Tekniske data: Spenningsområde: 100-1000V AC Batterier: 2x1,5V LR03 (inkludert) Dimensjoner:144x17 mm Vekt:50 gram

Elma 2000X is the market's smartest voltage tester. The second generation has improved in several aspects, including smart fastening test pens, with accurate distance between them, so that they fit directly into the wall outlet. The test probes has both 2 and 4mm diameter, which ensures good connection. Elma 2000X has many extra features that makes everyday work easier and safer. The instrument is fully automatic, switching between the different functions and can not fault controlled. - Voltage Test - 2 pole with LED indication 12-690 V AC / DC - Phase indicator - a voltage test indicates phase with LED and audible signal - Phase rotation test - 2-poled 3-phase networks - Continuity test - With LED and audible signal - Built-in lighting - Ideal when working in dark locations - High safety - IEC 61010-1 CAT IV, double insulated, IP 65, EN 61243-3 Class B - Suitable for Laus-work , Elma 2000A is equipped with practical highly flexible cord has a protective cover and is delivered incl. Danish manual and standard batteries. Voltage indication also works without batteries. Technical data: Voltage indication: 12, 24, 50, 120, 230, 400 and 690V AC / DC Test current: <3.5 mA Phase indication: 100-690V AC Continuity test: 000 to 400 k Phase Sequence: 2 pole principle, 200-690V AC Safety: IEC 61010-1 CAT IV 600V, IEC 61243-3, Class B (1000V) Double Insulated, IP 65 Battery: 2x1, 5V LR03 (included) Dimensions: 241x68x28 mm Weight: 230 g

Elma 2100X IS A NEW unique voltage-/continuity tester for extra high safety and with a lot of smarte details. Like: long flexible wire, smart fixed connection of the test probes with a distance so that they fits directly into a socket. Test probes with both 2 and 4mm diameter and integrated Protection cap. Elma 2100X has both a digital display, LED s and a lot of extra features, which makes the worh a lot more easy, and more safe. The instrument has automatically switching between the different funktions, and the voltage detection does also work without batteries. • Voltage test, 2 pole with LED s (12-690V AC/DC) • Voltage measurement with digital displaying (7-800V AC/DC) • Voltage detector, one-pole voltage test which indicates the phase • Fase sequence test, 2 pole for 3 phase supply • Continuity test with LED and acustical signal • Real voltage test also without battery • Automatical self test function. • Automatical On/Off – no buttons. • Build-in extra powerfull flashlight. • Double insulated, IP65, GS passed and cat IV 600V. Elma 2100X is delivered incl. standard LR03 batteries and complies with IEC 61243-3, EN 61010-1 cat. IV 600 and TUV/GS. The testers are IP65, person protected up to 690V earth potential and double insulated. TECHNICAL DATA Voltage range indication: 12, 24, 50, 120, 230, 400 og 690V AC/DC Digital displaying: 7,0 – 800/720V AC/DC Test current: < 3,5mA Voltage detector: 100-690V AC Continuity: 0-400 k Phase sequence: 2 pole principle, 200-690V 50/60Hz Working temperature: -15...55°C Safety: IEC 61010-1 CAT IV 600V / CAT III 1000V. IEC 61243-3 / 61010-031 / 61557-7, TUV/GS, double insulated Protection class: IP65 Wire: Silikone Battery: 2x1,5V LR03 (inkl.) Size: 246 x 64 x 29mm Weight: 190g

MultiScanner HD900c OneStep multifunksjons stud finder lokalisere stendere, metall og strømførende ledninger bak vegger, gulv og tak. Det avanserte ColorTrip-displayet lyser grønt i stud scan-modus, blått i metallmodus og rødt i live AC-scan-modus. Skjermen blinker eller lyser rødt for å varsle om tilstedeværelsen av live AC i Stud-, DeepScan- og Metal Scan-moduser. En 4-modusbryter gjør det enkelt å endre moduser, mens den ultra-lyse skjermskjermen, SpotLite Pointer og lydtonen indikerer plasseringen av målet.

Neozed DO1 fuse, 13A, 5 pcs.

Fuse Diazed DZ3 35A, 2 pcs.

Neozed DO1 fuse, 16A, 5 pcs.

When you make an insulation test on curcuits with elektronical equipment included, you should connect all phases and neutral together, during the measurement. In this way you are shure about, that there will be no potential between the leads, and therefore you will avoid accidents with electronical equipment and sensitive equipment. With the new Easy-ISO it is even more easy to make above written connections, and then make the measurement. Easy-ISO includes four Ø6,6 mm magnetical probes and a 4-pole test lead, which is connected together as one test lead. The magnetical probes are holding the wire fixed automatically on the measuring point, not using any other helping tools. An insulation test is made on an installation with no voltage present. Disconnect eg. on the RCD and connect the Easy-ISO on the downstream on a 4-pole curcuit breaker. If all the groups on the curcuit breaker is on, then you normally is able to measure the hole installation at once. Using this method all the installation is shortedit is important to disconnect Easy-ISO, before turning on the voltage. Elma Easy-ISO leveres i lille taske og opfylder IEC 61010-1 KAT III 600V. Technical data: Current: max 2A IEC61010: Cat III 600V