Instrumenter - side 2

Patented TwistGuardTM extendable tip shroud meets the highest electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurementsNew WearGuardTM lead wire wear indication. Each test lead is covered by two layers of silicone insulation, inner contrasting color is exposed when the leads are nicked, scuffed, or otherwise damaged and in need of replacementDouble insulated silicone leads. TL175 test leads withstand high temperatures and remain flexible in cold temperatures.Extra-heavy duty strain relief on both probe-end and plug-end, tested beyond 30,000 bends without failure.Universal input plugs are compatible with all instruments that accept standard 4 mm shrouded banana plugsRatings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2TL175E also available. Includes removable 4 mm lantern tips that thread onto the lead tipProbes always show correct category rating for tip being usedEnvironmental ratings: -20 °C to 55 °C (-4 °F to 131 °F), altitude: 2000 m (6,562 ft)Conforms to EN61010-031

5,7033174717e+12

Med denne smarte magnetiske proben vil testledningen automatisk bli festet på målepunktet, uten hjelp fra verktøy osv. Passer inn i en 4mm bananplugg. Overholder IEC 61010-1 CAT III 600V. Tekniske data: Strøm: Maks 2A Diameter: Ø6,6mm. IEC61010: Cat IV 600V, Cat III 1000V

Elma BM037 is a small and handy clampmeter designed for measuring True RMS AC and DC currents. Using this handy clamp multimeter, it is possible to measure currents as high as 600A. The multimeter function offers measurement of voltage, current, capacity, resistance and continuity. Besides the clamps function, the instrument is also measuring 0-2000 micro amperes on the sockets. Furthermore the instrument is equipped with temperature measurement, capable of measurements using standard type k sensor, for measuring numerous applications. The AmpTip function provides the opportunity to measure currents from 0-60A with enhanced accuracy.Elma BM037 is equipped with back lit display, min/max/rel, peak hold and voltage detection. Elma BM037 fulfills IEC 61010-1 CAT III 600V and CAT IV 300V and is delivered ready to use in bag including test leads, temperature sensor, battery and user manual.

The EEx approved Magnet Stick is an instrument for testing for the presence of magneticfields. By simply holding the tip of the instrument near the test area, it indicates a magneticfield by glowing. The test lamp responds to all kinds of magnetic fields, from alternating currentto direct current and permanent magnets. (Sensitivity 300 gauss 0,3 mT). The ATEXand IECEx approvals are confirmed by NEMKO. (II 2G EEx ib IIC T4).APPLICATIONS:– Testing operating solenoid valves in pneumatic and hydraulic control equipment– Testing relays with coils and electrically-controlled solenoid valves in all types of vehiclesand machines– Testing solenoid valves when servicing oil burners

Elma BM 257 er en ny smart mini-multimeter som gir to nye spennende funksjoner. Auto Check er en intelligent funksjon som automatisk oppdager og velger AC-spennings-, DC-spennings- og kontinuitetstest/motstand. Alt du trenger å gjøre er å slå på instrumentet og måle. Low Z er spenningsmåling med lav impedans, noe som betyr at målepunktet blir belastet, og derfor måler du den virkelige spenningen. Instrumentet har innebygd ikke-kontakt deteksjon av elektriske felt, som kan brukes til å oppdage elektromagnetiske felter fra PC-skjermer eller brukes som en ikke-kontaktspenning-detektor. Elma BM 257 måler sanntidsstrøm, spenning, motstand, frekvens, kapasitet, kontinuitet og temperatur. Elma BM 257 har bakgrunnsbelyst display med analog bargraf for enkel og rask lesing. Instrumentet er utstyrt med automatisk/manuell områdesøking , relativt mål , Peak hold , min/max , datahold and intelligent auto power off . Med PC-kommunikasjonen og Windows-programvaren (ekstra alternativ) kan det lages ON-Line datalogging . Instrumentet er veldig trygtog robust . Det kan håndtere feiltilkoblingeneogerutstyrtmedhøyeffektivsikringer.ComplieswithIEC61010-1CATIII600V.ElmaBM257leveresinkl.rubberbeskyttelse,testledninger,tempertursensor (wire sensor -50 til +250°C), batteri og manual. Tekniske data: Spenning: 0-60m-600m-6-60-600-1000V AC/DC Nøyaktighet: DC: ± 0,5%+2D, AC: ± 1,%+3D Strøm : 0 -500 -5000 -50 m -500 m -5A /10A AC/DC Nøyaktighet : DC : ± 0,5% +3D ,AC :±1,0% +3D Motstand : 06006k606k6M60M (600V) Kapasitet :00606003000F Frekvens10Hz50kHz Temperatur:-501000°C,(inkludert wireprobe,-50250°C) Diode test:01000mV,056mA<1.8VDC Kontinuitetstest:<10akustisk signal Displayet er på3sifreog6desimaler Maks.visning5999 Batteri2x15VL R03(inkl.) Størrelse161 x80 x50mm Vekt340g

Elma 2200X spændingstester Robust med 30mA belastningstest Produkt beskrivelse: Med Elma 2200X genopfinder Elma spændingstesteren, endnu engang. Elma...

Rød/svart 1000V/12A sett som inkluderer 1 rød og 1 svart silikon testledning på 0,75 mm2, 100 cm. Utstyrt med en beskyttelseshette og testpinne med mulighet for tilkobling på klemme osv. Oppfyller IEC 61010-1 CAT II 1000V. Tekniske data: IEC 61010: Cat II 1000V

Elma Laser 3 is a new and professional laser distance meter (LDM) with lots of automated functions and calculations. The instruments is simple to operate, and measures distances to 80 meters, has build in angle measurement and large, backlit multi display. Using the Bluetooth, Elma Laser 3 turns into a clever tool for documentation. Take a picture, using your smart phone or tablet, and quickly drag and drop the measurements and comments to the picture in the free Elma Link App and share by mail or other forwarding apps on your device. Elma Laser 1 makes it fast to measure room dimensions, ceiling height etc. Elma Laser 3 has build in memory, timer, +/- calculation and area and volume calculation. The instrument is delivered ready to use incl. nylon bag, batteries and manual.

Elma BM2805 Multimeter, sand RMS Produkt beskrivelse: Elma BM2805 er et robust, sand RMS multimeter med bagbelyst LED-display samt max- og datahold. I...

Neozed DO1 fuse, 10A, 5 pcs.

ATEX-approved voltage detector non-contact can tell if there is AC voltage present. If there is voltage present it will be indicated with a powerfull and clearly orange light. Volt Stick EX is perfect in controlling of eg.: - Fuses, without takeing them out. - Sockets. - Cables and wires, will find the an opening through the insulation. - Serial connected light chains, here it will find broken lights. Elma Volt Stick EX complies with IEC 1010-1 CAT III 1000V, EX: II 2G EEx ib IIC T4 and Nemko 03ATEX1456 and is delivered incl. manual and batteries. Technical data: Voltage range: 230-1000V AC Batteries: 2x1,5V LR 03 (incl.) Size: 146x 22 mm Weight: 40 g

Elma1500B er en ny liten og hendig tester med 3 funksjoner: - Testspenning 12-690 V AC / DC, 2-pol med LED-indikasjon - Analysetest med både hørbar og visuell indikasjon - Unipolar faseindikasjon Tester har smarte festetestprober med 19 mm avstand for å passe direkte inn i stikkontakten og muliggjør enkelthånds betjening. Instrumentet har ingen knapper og bytter automatisk mellom de forskjellige funksjonene slik at det ikke kan feilkontrolleres. Elma1500B bruker standardbatterier, og for ekstra sikkerhet fungerer spenningsprøvefunksjonen selv uten batterier. Elma1500B er i overflodsklasse IP54 og oppfyller spesielt IEC61010-1 CAT IV300V and CAT III600V and EN61243-3. Tekniske data: Spenningsprøve: 12,24,50 samt120,230,400og690VAC/DC Frekvens:0-65Hz Kontinuitet:0-200k Spenning:100-690V Batteri :2x1,5VLr03 (Inkludert) Dimensjoner :205x67x27mm Vekt :130g

With ElmaFlex 460 Elma is reinventing the clamp meter, it has never been easier to measure current in a big current range. The clamp is made of a very flexible material, and with a diameter on only 7,5mm and a length on 460mm, is it possible to measure on small places and is able to measure on a big bunch of wires. ElmaFlex 460 is in a ergonomical design, so that you can use it with only one hand, and also with glowes. The instrument measures true RMS current in the range from 0,2 to 3000A AC. The instrument is equipped with backlighted display, data hold, automatical range selection, and auto power off. ElmaFlex 460 complies with EN 61010-1 CAT IV 600V and CAT III 1000V, and is delivered incl. batteries and manual.Technical data:Current: 30,00...300,0...3000A ACResolution: 0,01...0,1...1 A ACAccuracy: ±3%rdg + 5DigitMax display: 33,00...330,0...3300ADisplay update: 4 times pr. sec.Frequency respons: 45-500HzLength of clamp: 460mmBattery: 2 pc. LR03 AAA batteriesSize:

Universal instrumentveske Elma Maxi - ideell for multimeter og andre instrumenter.

Yato YT-73080 multimeter Digitalt

When you make an insulation test on curcuits with elektronical equipment included, you should connect all phases and neutral together, during the measurement. In this way you are shure about, that there will be no potential between the leads, and therefore you will avoid accidents with electronical equipment and sensitive equipment. With the new Easy-ISO it is even more easy to make above written connections, and then make the measurement. Easy-ISO includes four Ø6,6 mm magnetical probes and a 4-pole test lead, which is connected together as one test lead. The magnetical probes are holding the wire fixed automatically on the measuring point, not using any other helping tools. An insulation test is made on an installation with no voltage present. Disconnect eg. on the RCD and connect the Easy-ISO on the downstream on a 4-pole curcuit breaker. If all the groups on the curcuit breaker is on, then you normally is able to measure the hole installation at once. Using this method all the installation is shortedit is important to disconnect Easy-ISO, before turning on the voltage. Elma Easy-ISO leveres i lille taske og opfylder IEC 61010-1 KAT III 600V. Technical data: Current: max 2A IEC61010: Cat III 600V

Fuse Diazed DZ3 35A, 2 pcs.

sikring 803293 - 11A - 1000V - 20kA - 10,3x38,1

Elma Volt Test Wide is a super sensitive proximity tester indicating voltage down to 12V AC. The instrument indicates without electrical and metallic touch, easy and secure AC voltage. When there is voltage (phase) present, it is indicated by a sharp and clear orange light. Elma Volt Test Wide meets IEC 61010-1 CAT III 1000V/KAT IV 600V and comes complete incl. guidance and batteries. Elma Volt Test Wide is ideal for monitoring example.: - Fuses, without being taken out. - Pick Secure sockets without separation. - Cables and wires, finds any. breaking through the mantle. - Daisy chains, find any. defective lamps. - Does the stage, even in large cable bundles / boards. Technical data: Voltage range: 12-1000V AC Batteries: 2x1, 5V LR 03 (included) Dimensions: 146x 18 mm Weight: 40 grams

Standard 16A CEE-plugg med innebygd fase / roterende felttester med LED-indikasjon på riktig / feil installasjon og mangel på fase / nøytral / jord. Det perfekte testverktøyet for alle brukere av CEE-plugger

Type 1076 er en flerbladet 4 mm bananstikkontakt for stabling og med fast beskyttelseshette. Ledningen klemmes med en Allen-nøkkel. Tekniske data: IEC 61010: Cat III 1000V, Cat IV 600V

Elma 106 indikerer AC spenning uten behov for berøring. Når spenningen er til stede (fase), indikeres det ved tilstedeværelsen av en kraftig og klar oransje lys. Elma 106 er ideell for overvåking: - Sikringer - Sikre kontakter uten separasjon. - Kabler og ledninger, bruk den til å søke etter trådbrytningspunkter. Elma 106 oppfyller EN 61010-1 CAT III 1000V/KAT IV 600V og leveres komplett med veiledning og batterier. Tekniske data: Spenningsområde: 100-1000V AC Batterier: 2x1,5V LR03 (inkludert) Dimensjoner:144x17 mm Vekt:50 gram

Elma 1000A er en praktisk sikkerhetsspenningstester med smarte designfunksjoner. Instrumentet har tydelig LED-indikasjon av relevante spenninger og automatisk polaritetsindikasjon. Testeren har en smart tilkobling med 19 mm avstand for å passe direkte inn i stikkontakten og tillater énhånds betjening. Elma 1000A er utført i IP54 og oppfyller spesielle IEC 61010-1 CAT III 690V- og EN 61243-3-standarder.

The FNIRSI 2C53P is a portable 3-in-1 measurement device combining a dual-channel oscilloscope, digital multimeter and DDS signal generator in a compact handheld format. It features a 4.3-inch IPS touchscreen with 480×272 resolution for intuitive control and clear waveform display. The oscilloscope offers 50 MHz bandwidth and 250 MSa/s sampling for accurate signal analysis, while the multimeter supports high-precision 19999-count measurements across voltage, current, resistance, capacitance and temperature. A 4000 mAh battery enables portable operation, making it suitable for field, workshop and laboratory use.