Instrumenter - side 14

Now compatible with Fluke ConnectTM Mobile App The 289 is the next generation high performance industrial logging multimeter designed to solve complex problems in electronics, plant automation, power distribution, and electro-mechanical equipment. With the ability to log data and review it graphically on-screen, you can solve problems faster and help minimize downtime. Let the new 289 be your watchdog for systems or processes while you are off doing other jobs. Now communicate wirelessly with your iOS and Android smart devices with the Fluke Connect mobile app and ir3000 FC wireless connector (sold separately).NEW – Let your team see what you see in an instant with ShareLiveTM video call (requires Fluke Connect mobile app and ir3000 FC wireless connector).TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.Zoom on trend provides unprecedented ability to view and analyze TrendCapture data, zoom in up to 14 times.Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.Large 50,000 count, 1/4 VGA dot matrix display with white backlight.Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.Save multiple logging sessions before PC download is necessary.Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when

SureGripTM accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.One pair (red, black) of large alligator clips with nickel-plated steel jawsMulti-purpose tooth pattern grips anything from fine gauge wire to a 20 mm boltRecommended for use with TL222 and TL224 test leadsCAT IV 600 V, CAT III 1000 V, 10 A rating, CCSAUS Rating EN/IEC 61010-031:2002 +A1:2008

Glass fuse - slow, 2A - 10 pack

Senko sgt o2

Blå 100cm kvalitetstestledninger med fast hette, dobbeltisolert høy fleksibel silikon, 0,75 mm2 12A med isolerte stablingsbare 4 mm sikkerhetsbananplugger. Tekniske data: IEC 61010: CAT III 1000V, CAT IV 600V

Elma 6100BT is a rugged true RMS AC/DC mini multimeter equipped with Bluetooth function. The instrument measures current, voltage, frequency, capacitance, resistance and continuity. Furthermore, the instrument provides a custom range for external current clamp, measuring as much as 3000A using the flexible clamp ElmaFlex 430.Using the Bluetooth function and free app, Elma Link, available for both iOS and Android, Elma 6100BT becomes a safe an clever documentation tool. Watch the display directly on your Android/iOS device and perform measurements in safe distance from dangerous voltage. Watch and record all values and trends directly on your phone. Save and attach comments to measurements and share e.g. by mail.Elma 6100BT is equipped with back lit display and bright LED torch light, data hold, max/min and auto power off. The instrument fulfills EN61010-1 CAT III 600V and is delivered with test leads, batteries and manual.Using the Bluetooth function and the free App, Elma Link, available for iOS and Android, Elma 6100BT is an easy tool for documentation. Watch the display on your mobile device and perform the measurements in safe distance from dangerous voltages. Record values and trends on your phone and save with attached photo documentation for easy sharing by mail etc.Elma 6100BT is equipped with a large, back lit display and has built in LED torch light, data hold, max/min and auto power off. The instrument fulfills EN61010-1 CAT III 600V and is provided in bag incl. test leads, batteries and manual.

Adjustable tip length, allowing increased safety and precision Compatible with the TL22x series, TL238 and TL27 test leads Conforms to EN61010-031 CAT II 1000 V, CAT III 1000 V, CAT IV 600, 10 A rating, UL Listing One-year warranty Patented TwistGuardTM extendable tip shroud meets the highest electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2 Probes always show correct category rating for tip being used Environmental ratings: -20 °C to 55 °C (-4 °F to 131 °F), altitude: 2000 m (6,562 ft) Conforms to EN61010-031 One-year warranty Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2 Exposed probe tip length: 19 mm to 4 mm (0.75 inch to 0.16 inch) Environmental ratings: -20 °C to 55 °C (-4 °F to 131 °F), altitude: 2000 m (6,562 ft) TL175 and TL175E also available. TL175E includes removable 4 mm lantern tips that thread onto the lead tip.Conforms to EN61010-031

Application: Metal detection, wood detection, AC detection, cavity detection (max. 24 mm)

Range of tests: Cold Cranking Amps (CCA): 100-2000 CCA / Europe-Norm (EN): 100-2000 CCA / International Electrotechnical Commission (IEC): 100-1400 CCA / Cranking Amps (CA): 100-2000 CCA / Deutsche Industrie-Norm (DIN): 100-1400 CCA / Battery Council / International (BCI): 100-2000 CCA / Marine Cranking Amps (MCA): 100-2000 CCA / Japanese Industry Standard (JIS): 126A17-245H52 / GB: 30-220AH

Features: Battery charge test, internal resistance test, start-up test, battery voltage test, load test, real-time voltage monitoring, voltage waveform analysis, anomaly alarms, data storage, ripple test

The Habotest non-contact voltage (NCV) and phase detector provides precise measurement and safe use. Equipped with LCD and sensitivity adjustment button - it is very convenient to use. It offers breakpoint checking, as well as active and inactive cable detection, and automatically shuts off after 3 minutes of inactivity. The built-in LED flashlight will make your work easier. The device is powered by 2 AAA 1.5V batteries.

Habotest HT651D infrared thermometer guarantees unparalleled precision of measurement. With its help you not only measure the temperature of a specific point, but also check the ambient temperature, dew point and relative humidity. The color display makes working with the device easy and the included K-type thermocouple gives even more possibilities. The thermometer also has an alarm function. It requires a 9V 6F22 battery to power it, which must be purchased separately.

Batteripakke 7,2V NiMH oppladbar for Davo-Meg 1002 og Digi-Meg 1003 (produsert etter 1.1.2004 fra serienummer 38401040116)

Testledningssett for blant annet fasefølgetest

The Habotest universal meter is an indispensable tool that provides precise measurement of parameters such as voltage, continuity or temperature, among others. The backlit display makes it easy to use. The built-in flashlight will allow you to work also in dark rooms, and with a special stand you can safely place the device on a flat surface. The product is also equipped with NCV sensors for non-contact voltage measurement. The meter supports automatic range selection.

Fluke’s two-pole voltage and continuity testers are built to work the way you work. They give you the best combination of safety, ease-of-use and fast answers available anywhere.CAT IV 600 V, Cat III 690 V safety rating Fluke’s family of Two-Pole Voltage testers comply with both regulation HSE GS 38 (tip caps) and IEC EN 61243-3: 2010.4 ways to detect ac/dc voltage A clear, instantly visible LED indicator, a bright digital display of the measurement value, an audible continuity test, and vibration to give tactile feedback (vibration indicator on T110, T130, T150).Backlit graduated scale and backlit indicatorsVibration provides tactile feedback (T110, T130, T150).Audio on/off for testing in quiet areas.Low battery indicatorDetects voltage even with discharged batteriesImproved probe docking for secure storagePhase rotation indicator for 3-phase systemsRCD functionality Two-button controls allow you to draw more current from the circuit under test and intentionally trip Residual-Current Devices (RCDs) remotelyDisplay Hold (T130, T150)Built in electric torch (T110, T130, T150)Single-phase voltage offers fast identification of live conductorsPush-on probe tips, probe tip protector and storage accessoryProbe tip protector and storage accessory Tip protector serves as an extra hand when opening UK electrical safety outlets.Resistance testing to 1999 ohms (T150)WearGuardTM insulation shows damage to test leads

En par (rød, svart) av slanke probekropper for å undersøke tett plasserte eller innfelte terminaler. Harde rustfrie stålkrokspisser. Isolert probespiss (designet for å møte GS38-spesifikasjoner for Storbritannia). CAT IV 600 V, CAT III 1000 V, 10 A rating. UL-listet

Habotest HT603 is used to measure light intensity in the range of 0~100000 LUX / 0~10000 FC. It will work well in fields such as the electrical industry or for room inspection purposes. It is distinguished by its fast response time, and its rotating probe makes it more convenient to use. What's more, you can also measure the ambient humidity level and temperature with the device. In addition, the HT603 is powered by 3 AAA batteries.

Elma 30 is a small smart Pen-tool for test of magnetism without metallic contact. Elma 30 is held against the test point and will light with clearly strong red light, if there is a magnetic field. Indispensable for testing: - Pneumatics and hydraulics - Oil and gas burners - White goods and machinery Elma 30 provides easy and safe testing, without coming into contact with live wires. Supplied incl. batteries and test magnet. Technical data: Tests: Permanent magnets and coils AC / DC Batteries: 2x1, 5V LR03 (included) Dimensions: 20x140mm Weight: 45 grams

The HT106D socket tester is a small but very useful device that will allow you to take better care of the safety in your home. It is equipped with an LED indicator that will provide you with the most important information. Among other things, it will notify you of the lack of grounding, and it also allows you to perform an RCD test. With the HT106D, you can avoid damage to your appliances and prevent other hazards.

Elma 708 - Mini penetration thermometer . Measuring from +50...250degrees.

For røyk-penn bruk til testing: Røykalarmer, luftfiltre, kjemisk avtrekksskap, luftbalansering, vifter, fotografering, spesialeffekter og mye mer.

SD Micro kort (min 4Gb) Produkt beskrivelse: SD Micro kort for Elma instrumenter (min 4Gb) inkl. SD-adapter Tekniske specifikationer: Type: Øvrige

Unik motor tester som er i stand til å teste alt som gjelder motorer, generatorer, frekvensomformere og mer. TR1000 måler induktansen i motorens viklinger og lednings-/isolasjonssvikt, både direkte på motoren eller gjennom installasjonen. Induktansmålingen er den eneste sikre målemetoden, og den gir mye større sikkerhet enn en normal resistansmåling. TR1000 er et must-have instrument for profesjonell service/feilsøking og forebyggende vedlikehold. Leveres i en pose inkludert batterier, testledninger, klemmer og manual. Tekniske data: Motortest fra: 10W-1000kW Induktansmålespenning: Maks 9V Isolasjonsmåling: 500V Batteri: 6x1,5V LR6 (inkludert) Størrelse: 95x158x60 mm Vekt: 800 g

16A CEE stikprop til bananstik Produkt beskrivelse: Stikadapter for CEE 16A til standard 4mm bananstik bøsning. Slip for at skulle holde 2, 3 eller fl...

The Fluke T6-600 is an electric multi-tester perfectly adapted to the electrician's daily work. With the built-in fork, measurements of both current and voltage can be made without electrical contact with the measuring object. Fluke FieldSense technology measures voltages of up to 600V AC, which are displayed on the built-in display, without the need for test leads. Current up to 200A is easy measured via the built-in fork. Fluke T6-600 builds on the very popular T5-600, and offers news like resistance measurements up to 1000, frequency measurement, hold function, traditional AC / DC voltage measurements up to 600V, backlit display, etc. As an accessory, Fluke TPAK Magnetic Hanger and Holder H-T6 are available. Tested and approved according to EN61010-1 CAT III 600V. Two year warranty.