Instrumenter - side 11

CA 703 multimeter Produkt beskrivelse: CA 703 er et smart kompakt multimeter med auto-range. Instrumentet har stort display og måler spænding og strøm...

Elma BM878 er en ekte TRUE RMS CAT IV multimeter med innebygd isolasjonstester. Isolasjonstesteren har fem valgfrie testspenninger og innebygd 200mA ohm (motstand) meter for måling på utjevningsforbindelse. Elma BM878 er utstyrt med en stor opplyst dobbel skjerm og rask analog bargraf. Instrumentet måler sanntids spenning, strøm, frekvens, motstand, kapasitet, dioder, kontinuitet og temperatur. Elma BM878 har mange ekstra funksjoner som maks/min-verdier, datahold-funksjon , automatisk avslåing , automatisk / manuell områdesøking og VFD-funksjon som gjør at instrumentet kan måle sanne verdier etter invertere . Multimeteret overholder EN61010-1 CAT IV 600V og leveres inkludert fjernkontroll , testledninger , batterier , type-k temperaturprobe og manual .

Habotest HT625B anemometer
HT625B is a functional and compact anemometer with high sensitivity. It is equipped with an 8-blade rotor and HD color display. It requires 3 AAA 1.5V batteries to power it. It allows you to take measurements in different units. You can also connect it to a computer via a USB cable for real-time data management.

Precise measurement of various parameters
This multifunctional anemometer accurately measures not only air velocity, air volume (CFM, SMM, CMS) and humidity, but also air temperature, wet thermometer and dew point. It also allows you to take average measurements. You gain access to individual functions and settings by pressing specific buttons. Habotest meets the expectations of users around the world. The ability to change the unit of measurement will allow you to adapt the device's operation to your needs and habits. Available options include m/s, km/h, miles/h, ft/s and even knots. The device is distinguished by its high sensitivity and responsiveness of 0.5 seconds.

Ease of use
Operation of the HT625B is surprisingly simple. The device features practical buttons such as an on/off switch and a function toggle key, as well as buttons that allow you to select the parameter unit and the value you want the device to calculate (minimum / maximum / average) and a button that allows you to store data. The anemometer also has an 8-blade rotor with a bearing sensor, a high-resolution color screen and a USB port.

Convenient access to information
The anemometer is equipped with an easy-to-read HD color display that can display units with a maximum value of 9999. It provides convenient access to the most important information related to the operation of the device. It allows you to quickly check not only the measurement results, but also the battery status, for example. You can also gain more convenient access to data and manage it in real time - the HT625B can be connected to a laptop or computer via USB. Take advantage of this opportunity to work even more comfortably, yet efficiently.

Practical, portable, convenient to use
HT625B is not only functional, but also lightweight and handy. Using it is extremely comfortable. It fits perfectly in the hand and does not cause discomfort. Its transportation will not cause you any problems either - it measures only 197 x 60 x 33 mm, so you can easily fit it into your bag and take it wherever you need it. The product will be great for meteorology, industry, hydrology and urban environments, among others. It will also be useful for those involved in environmental protection.

Included:
Digital anemometer x1
AAA 1.5V battery x3
User manual x1

Mini tømmeaggragat R32, 2 kompres, 730W Produkt beskrivelse: VRR-24L-R32 fra Value, er en højt ydende tømmestation, der er anvendelig til mange forske...

Patented TwistGuardTM extendable tip shroud meets the highest electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurementsNew WearGuardTM lead wire wear indication. Each test lead is covered by two layers of silicone insulation, inner contrasting color is exposed when the leads are nicked, scuffed, or otherwise damaged and in need of replacementDouble insulated silicone leads. TL175 test leads withstand high temperatures and remain flexible in cold temperatures.Extra-heavy duty strain relief on both probe-end and plug-end, tested beyond 30,000 bends without failure.Universal input plugs are compatible with all instruments that accept standard 4 mm shrouded banana plugsRatings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2TL175E also available. Includes removable 4 mm lantern tips that thread onto the lead tipProbes always show correct category rating for tip being usedEnvironmental ratings: -20 °C to 55 °C (-4 °F to 131 °F), altitude: 2000 m (6,562 ft)Conforms to EN61010-031

HT208D is a practical device with which you can check the value of various parameters, for example, AC and DC voltage and current, resistance, temperature, inrush current and many others. The product provides accurate measurements, and the results are displayed on the LCD screen. The HT208D also features a flashlight for convenient operation in dark rooms.

ATEX-approved voltage detector non-contact can tell if there is AC voltage present. If there is voltage present it will be indicated with a powerfull and clearly orange light. Volt Stick EX is perfect in controlling of eg.: - Fuses, without takeing them out. - Sockets. - Cables and wires, will find the an opening through the insulation. - Serial connected light chains, here it will find broken lights. Elma Volt Stick EX complies with IEC 1010-1 CAT III 1000V, EX: II 2G EEx ib IIC T4 and Nemko 03ATEX1456 and is delivered incl. manual and batteries. Technical data: Voltage range: 230-1000V AC Batteries: 2x1,5V LR 03 (incl.) Size: 146x 22 mm Weight: 40 g

Elma 3037 is atrue RMS clamp meter in a handy design for easy measuring of AC currents. The instrument has a good resolution down to 10mA, a big backlighted display, smart data hold and automatically zero-adjustment. Elma 3037 has low pass filter and "Inrush" for measuring on start/inrush currents. With the "Volt sense" function you are able to detect the voltage without contact. THe instrument complies with IEC 61010-1 CAT III 600V and is delivered incl. batteries and manual. Technical data:Current AC: 0-60-300AResolution: 0,01-0,1AAccuracy: ±2% + 5 DDisplay: 3 5/6 cifferMax. display: 5999Clamp size: 24 mmBattery: 2x1,5V LR44 (incl.)Size: 147x60x31 mmWeight:100 g

Elma 608 er en enkel og liten IR-temperaturmåler laget i praktisk pennestørrelse - passer rett i skjortelommen. Instrumentet måler overflatetemperaturer uten kontakt. Enkelt og raskt. Elma 608 er utstyrt med unik sirkulær lasermarkering, som gjør området for måling tydelig synlig. Videre er instrumentet utstyrt med min / max / hold-funksjon og en klar, bakgrunnsbelyst skjerm. Instrumentet leveres klart til bruk inkludert batterier.

The HT650B non-contact infrared thermometer provides precise and fast measurement - you will get results in less than 0.5 seconds. Easy to use and handy - using it will not cause you any problems. The device is equipped with a temperature limit alarm and a color LCD display. It will prove itself in many applications. For powering it is necessary to use 2 batteries AAA 1.5V.

Elma DT5500A er en ny smart multimeter kombinert med en isolasjonstester med overlegen oppløsning. Instrumentet er veldig robust og utstyrt med stor, lett å lese opplyst skjerm med smart analog stolpediagram. Multimetrene måler AC / DC spenning, motstand og kontinuitet. Isolasjonstesten har valgfrie testspenninger 125, 250, 500 og 1000V, og låsbar testfunksjon. Elma DT5500A har automatisk utladning av kapasitiv spenning og advarer automatisk om farlig spenning hvis du prøver å utføre en isolasjonstest på live installasjoner. Instrumentet har automatisk områdesøkning, datahold og min / max-måling. Elma DT 5500A er utstyrt med integrert gummibeskyttelsesveske og oppfyller IEC CAT III 1000V / CAT IV 600V-kravene. Instrumentet leveres komplett i pose inkludert testledninger, batterier og instruksjoner.Tekniske data: Testspenning: 125,250 ,500 and1000 V Isolasjonsmotstand:                                                                                                                                                                                                                           (ohm) : (M) : (M) : (M): (M): 0-4M-40M-400m-4000M Oppløsning: 0,01 M Teststrøm: 1mA Spenning: 0-750 / 1000V AC / DC Motstand: 0-40 -400 Batterier: 6x1.5 V LR6 (inkludert) Dimensjoner: 200x92x50 mm Vekt :700g

VES-100A kølemiddelvægt 100 kg Produkt beskrivelse: VES-100A er en hel lavpraktisk vægt til kølemiddel, præcis og betjeningsvenlig med opløsning ned t...

Digital Clamp Meter Habotest HT206D True RMS , NCV, LPF

The FNIRSI SG-004A is a compact mini signal generator offering professional functionality in a pocket-sized design. It features a 2.4-inch HD backlit display, adjustable brightness, real-time curve viewing, and multi-mode operation. With ≤0.2% measurement accuracy, drop protection, USB-C charging, and up to 24 hours standby, it is ideal for field engineers, technicians, and electronics enthusiasts. The device supports a wide range of signal types and testing tasks, including voltage/current testing, speed simulation, actuator adjustment, and inverter diagnostics, providing reliable and portable performance wherever you need it.

Den nye NaviTEK NT er en nettverkstester for feilsøking og vedlikehold av aktive og passive kobber- og fibernettverk. Ved å inkorporere et forbedret grafisk grensesnitt, lar NaviTEK NT nettverksteknikere finne og løse nettverksproblemer raskere enn noen gang før. Deretter kan tester lagres som pdf-rapporter og deles med kolleger og kunder ved hjelp av den gratis IDEAL AnyWare-appen.

The Habotest non-contact voltage (NCV) and phase detector provides precise measurement and safe use. Equipped with LCD and sensitivity adjustment button - it is very convenient to use. It offers breakpoint checking, as well as active and inactive cable detection, and automatically shuts off after 3 minutes of inactivity. The built-in LED flashlight will make your work easier. The device is powered by 2 AAA 1.5V batteries.

Senko sgt o2

Elma Chrome batteritester Produkt beskrivelse: Med enestående design og funktion simulerer den nye Elma CHROME en 20 timers (C20) afladningstest på 6...

Standardprobe - Type K Ni-CrNi. Proben leveres med spiraltråd og isolert håndtak. Tekniske data: Måleområde: -50....maks +900°C Størrelse: 130x8 mm

The smart digital multimeter from Habotest is distinguished by its high precision and use of practical solutions. The HT121 is lightweight and compact, offering an easy-to-read display, flashlight and SMART functions. It is powered by 2 AAA batteries.

Habotest HT603 is used to measure light intensity in the range of 0~100000 LUX / 0~10000 FC. It will work well in fields such as the electrical industry or for room inspection purposes. It is distinguished by its fast response time, and its rotating probe makes it more convenient to use. What's more, you can also measure the ambient humidity level and temperature with the device. In addition, the HT603 is powered by 3 AAA batteries.

Testledningssett for Digi.Meg isolasjonstester

16A CEE stikprop til bananstik Produkt beskrivelse: Stikadapter for CEE 16A til standard 4mm bananstik bøsning. Slip for at skulle holde 2, 3 eller fl...

2711, 100cm, prøveledning sort+rød ø4mm Produkt beskrivelse: Prøveledningssæt 100cm sort+rød med stabelbare sikkerhedsbananstik. Tekniske specifikatio...

MagnetStick® - multi-language packaging Produkt beskrivelse: Magnet Stick er et smart lille Pen-instrument for nem test af magnetisme uden metallisk k...