Instrumenter - side 7

Test leads are an integral part of the complete measurement system and extend the capabilities of your digital multimeter. The TL224 SureGripTM Insulated Test leads offer reinforced strain relief and includes banana jack termination for a variety of test lead configurations. SureGripTM accessories are designed to improve steadiness in slippery hands. Rubber over molded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.DMM test leads (red, black) with safety shrouded, standard diameter banana plugsRight angle connector on one end and straight connector on the otherReinforced strain relief1.5 meter silicone-insulated wire resists heat & coldCAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed

Elma Combitest 425 is an innovative multifunction installation tester capable of carrying out safety tests on civil and industrial electric systems in compliance with IEC/EN61557-1. Furthermore the instrument is a 1 phase energy analyze and is capable of saving results of environmental parameters (illuminance, temperature), leakage current, active power, harmonics, power factor measurements on single phase systems. The resistive TFT color touch-screen display, the icon menues, the on screen help and the userfriendly development make the instrument extremely intuitive even for unskilled users. Its numberless features grant the user a wide range of applications in the world of measurements. The multifunction installation tester Elma Combitest 425 allows saving all measures into an internal memory so transferring the saved data to a PC by means of USB (optional) or built in WiFi interface with an iOS or Android smartphones or tablet . The software supplied among standard accessories allows printing the testing reports. The instrument also drives optional short circuit adapter to carry out high resolution (0.1mOhm) loop/line impedance measurements with prospective short-circuit current calculation. This allows accurate measurements even close to power stations enabling the user to correctly size the protection devices in any system. Further possible tests consist in checking breakdown current, tripping current, I2t relative to breakers (MCB) with curves B, C, D, K and fuses type gG as well as aM and the percentage voltage drop on the main power lines. The test on earth leakage relay tester RCDs up to 10A (with optional accessory) is also possible with the instrument. Through optional clamp it is possible to measure the leakage current.

FNIRSI FNB48P USB-porttester, svart

FNIRSI FNB48P er en avansert USB-porttester utviklet for presis analyse av ladeprosessen. Den støtter flere grensesnitt og hurtigladeprotokoller, fungerer ved høye strømstyrker og muliggjør nøyaktig overvåking av spenning, strøm og effekt. Den tilbyr intelligent kabeldiagnostikk, dataregistrering og -analyse, oversiktlige grafer og automatisk skjermorientering. Hele enheten er innkapslet i et solid metallhus og drives av en effektiv prosessor, noe som gjør den til et pålitelig verktøy for daglig arbeid og avansert testing.

Elma RT606A er en praktisk elektronisk fase-sekvens tester som med kraftige LED-lys viser rotasjonsretning og indikerer de individuelle fasene. Instrumentet oppfyller IEC 61010-1 CAT III 300V og leveres med sikkerhetstestledninger, 3 isolerte alligatorclips og 3 testpinner. Tekniske data: Arbeidsspenning: 150-500V Frekvens: 50/60Hz Målestrøm: <3,5 mA Dimensjoner: 130 x 72 x30 mm Vekt:190 g

5,7064451109e+12

Elma 2100X IS A NEW unique voltage-/continuity tester for extra high safety and with a lot of smarte details. Like: long flexible wire, smart fixed connection of the test probes with a distance so that they fits directly into a socket. Test probes with both 2 and 4mm diameter and integrated Protection cap. Elma 2100X has both a digital display, LED s and a lot of extra features, which makes the worh a lot more easy, and more safe. The instrument has automatically switching between the different funktions, and the voltage detection does also work without batteries. • Voltage test, 2 pole with LED s (12-690V AC/DC) • Voltage measurement with digital displaying (7-800V AC/DC) • Voltage detector, one-pole voltage test which indicates the phase • Fase sequence test, 2 pole for 3 phase supply • Continuity test with LED and acustical signal • Real voltage test also without battery • Automatical self test function. • Automatical On/Off – no buttons. • Build-in extra powerfull flashlight. • Double insulated, IP65, GS passed and cat IV 600V. Elma 2100X is delivered incl. standard LR03 batteries and complies with IEC 61243-3, EN 61010-1 cat. IV 600 and TUV/GS. The testers are IP65, person protected up to 690V earth potential and double insulated. TECHNICAL DATA Voltage range indication: 12, 24, 50, 120, 230, 400 og 690V AC/DC Digital displaying: 7,0 – 800/720V AC/DC Test current: < 3,5mA Voltage detector: 100-690V AC Continuity: 0-400 k Phase sequence: 2 pole principle, 200-690V 50/60Hz Working temperature: -15...55°C Safety: IEC 61010-1 CAT IV 600V / CAT III 1000V. IEC 61243-3 / 61010-031 / 61557-7, TUV/GS, double insulated Protection class: IP65 Wire: Silikone Battery: 2x1,5V LR03 (inkl.) Size: 246 x 64 x 29mm Weight: 190g

Elma Thermo X150 is a smart compact thermal camera, with a resolution of 160x120 pixels = 19,200 pixels. The camera is super easy to operate with point-and-shoot functionality, fixed focus and without a lot of complicated settings. Thermo X150 takes a thermal image together with a 2MP visual image, and saves both images on an SD card in the camera. The images can be transferred to a PC via a USB-C cable, or by inserting the SD card into the PC.

You can download a user-friendly analysis and reporting software for free on our website, and with Thermo X150 it is easy to document temperature-related work tasks in a professional way - without the big investment, and without having much experience in the mysteries of thermography. The replaceable rechargeable Li-ion battery is charged via USB-C - charger included.

Elma Thermo X150 comes ready to use in a box with USB Type-C cable, charger, 8GB SD card and manual.

Elma BM 829 has a lot of new smart functions as "Auto Check" and "Lov Z" and a IEC 61010-1 approval for CAT IV 1000V. Auto Check is an intelligent function, which automatically detects and choose AC voltage, DC voltage and continuity test/resistance. Everything you have to do is to turn on the instrument, and make a measurement. Low Z is voltage measurement with low impedance, which means that the measuring point will be loaded, and therefore you will asure that it is the real voltage that you are measuring. Elma BM 829 is equipped with a large backlighted double display and quick analog bargraph. The instrument measures true RMS AC+DC voltage, current, frequency, resistance, capacity, diods, continuity and temperature. Elma BM 829 has a lot of extra functions like 1ms crest/peak hold, max/min, relative measurement, data hold, auto shut-off, automatically/manual range selection and RS 232 port for PC-communication. The instrument has build-in non-contact detection of electrical fields, which can be used to detect electromagnetical fields from PC screens or as non-contact voltage detector. With PC-communication and Windows software (ordered separately), is it possible to make ONLine data logging. The measured results can be displayed as: Digital display, analog display, curve/graph and table. With the instrument connected to a PC data can be stored in intervals from 1 second to 1 hour. Elma BM 829 is UL listed and complies with IEC 61010-1 CAT IV 1000V. The instrument is equipped with high efficient fuses and is delivered incl. manual, temperature sensor (–50...250°C), battery, test leads and rubber protection. Technical data: Voltage: 0-100m-1000m-10-100-1000V AC/DC Accuracy: DC: ± 0,08%+2D, AC: ± 0,5%+3D Band width: 20 kHz Current: 0-600-6000-60m-600m-6-10A AC/DC Accuracy: DC: ± 0,2% + 4D, AC: ± 0,6% + 3D Resistance: 0-600-6k-60k-600k-6M-60M (600V) Capacity: 0-60n-600n-6-60-600-6000-27mF Conductance: 0,01 – 100nS Frequency: 10

Kyoritsu K 2031 er en liten klemmemåler i en størrelse jeg aldri har sett før, og den er veldig praktisk. Instrumentet måler AC-strøm og kan på grunn av størrelsen brukes nesten overalt - også på steder der det skulle være umulig å måle med en vanlig klemmemåler. Instrumentet er utstyrt med datahold, oppfyller IEC 61010-1 CAT III 300V, og leveres i et etui inkludert batterier og manual. Tekniske data: Strøm: 0-20-200A AC Oppløsning: 0,01-0,1A Nøyaktighet: ±2% +5D Display: 3½ siffer Maksimalt display: 1999 Klemmestørrelse: 24mm Batteri: 2x1,5V LR44 (inkludert) Størrelse:145x51x25 mm Vekt :95 g

Normale testledninger er vanligvis 1-2 meter. Dette er ikke alltid nok. Når du må måle elektrisk kontinuitet i beskyttelses-/jordledninger, trenger du ofte veldig lange testledninger. Elma tilbyr mange forskjellige løsninger med testledninger montert på en praktisk kabeltrommel, som sikrer at det alltid vil være lett å bruke og bruke på riktig lengde. Overholder IEC 61010-1 Cat II 250V. Tekniske data: Lengde: 50m Størrelse: 1,5mm2 IEC 61010: Cat II 250V

FNIRSI Handheld Digital Oscilloscope Transistor Tester SigGen 3 in 1 DSO-TC3

The HT602B sound level meter is distinguished by its high sensitivity and will prove useful in places such as a construction site or factory. The color LCD display will provide you with the most important information, and the additional wind shield ensures accurate measurements regardless of the conditions. The device offers several operating modes, and with the ability to connect it to a computer via USB you will gain convenient access to data. In addition, 3 AAA batteries are required to power the meter.

Kontakt Pasta for termoprober.

Erstatnings testledninger for T5

Elma DT802D, CO2 / Relative Humidity / Temperature Monitor måler innendørsklimaet og viser de målte verdiene direkte på displayet, og kan også logge verdiene over en periode, perioden avhenger av loggruppen (32 000 verdier). Monitoren er ideell for måling på skoler, institusjoner, møterom, kontorer osv. Dårlig innendørsklima kan forårsake ubehagelige gener som hodepine, tretthet og nedsatt konsentrasjonsevne. Her kan du måle konsentrasjonen av CO2 og få en god indikasjon på om belastningen i rommet er passende i forhold til romstørrelse og ventilasjon.

TL75 Hard PointTM Test Lead Set tilbyr bekvemmeligheten av en testledning og probe-i-enhet med en rekke tilkoblinger. En par (rød, svart) komfortgrep-probe med PVC-isolerte rette vinkelskjulte 4 mm (0,16) bananstikkontakter

Habotest HT108L digital multimeter is a multifunctional device that will prove useful during electrical work. The product allows you to measure voltage, resistance and many other values. The multimeter has an easy-to-read display that allows you to conveniently read the measurement results, moreover, it is equipped with a flashlight and practical buttons.

Habotest HT108L digital universal multimeter is a handy device that surprises with the enormity of its capabilities. It allows you to measure with high precision, among other things, AC and DC voltage, resistance, continuity or capacitance. It also allows you to test diodes, and thanks to practical buttons you can efficiently select the appropriate function.

The small size of the device (130 x 70 x 23 mm) makes the multimeter fit well in the hand and provides high comfort of use. It is powered by two AAA batteries, which you can easily remove and replace. The soft material housing is pleasant to the touch, plus it provides effective insulation and is drop-resistant.

Metrel MI2093 Line Tracer is a complete cable tracer kit, for tracing on hidden cables and wires. The kit consists of a transmitter unit, which can be used on installations with and without present voltage, and a receiver with adjustable sensivity. The transmitter is forced by batteries and can be used to trace/follow cables both with and without voltage. Line Tracer will easily find a disconnected wire, plugs, sockets and more. If you connected to a cable with present voltage is it possible to follow/identify the cable throughout the net supply. The tracer will indikate if it is working on an installation with or without voltage, and if the battery voltage is to low. The receiver indicates how strong a signal it will catch reflected by diods og by sound signals. On the receiver is it possible to choose between three levels of sensivity, this will secure a more accurate tracing. With the special designed selective/high sensitive probe, you are able to identify fuses in boards

HIKMICRO ECO-V is a super compact and competitive thermal camera that weighs only 350 grams and has a thermal resolution of 96x96 pixels. ECO-V stores real radiometric thermal images as well as visual image in the built-in memory. The camera has a thermal sensitivity of less than 50 mK and is suitable for troubleshooting, checking or documentation in connection with temperature-related tasks. The camera has a temperature range of -20°C - 550°C, and displays the thermal image on a 2.4" LCD screen.

Elma 43 LAN-kabeltester er et lite og brukervennlig instrument for enkel og rask kabeltesting. Instrumentet kan teste både patchkabler og direkte på installasjonen ved hjelp av den inkluderte fjernkontrollenheten. Det kan testes for blant annet gjennomgang, kortslutninger, avbrudd, kryssede par og feilaktige tilkoblinger; installasjonen må være spenningsfri under testing.Testresultatene vises med fargede LED-er, og du kan velge mellom sløyfe- eller fjernadaptertester samt manuelle eller automatiske tester. Instrumentet leveres komplett i en pose inkludert instruksjoner, batteri og adaptere for blant annet RJ45 / RJ11 og BNC.TEKNIKKDATAKabellengde for test: 0,1-300mKontakter: RJ45 / RJ11 and BNCBatteri: 9V 6F22 (inkl.)Dimensjoner: 127x54x34mmVekt: 120g

Prøveledning 2611 silikone 100 cm grøn Produkt beskrivelse: Kvalitetsprøveledning med fast kappe, dobbeltisoleret højfleksibel silikone.Opfylder IEC 6...

Sikring for Elma 515/525/859/898 - 0,44A Produkt beskrivelse: Sikring 0,44A, 10kA/1000V10x38mmf/ 515X, 525, 812CF, 859, 869, 898 Tekniske specifikatio...

Elma Laser 1 er en helt ny mini laser avstandsmåler (LDM), som inneholder mange funksjoner i et lommeformat instrument. Instrumentet er enkelt å betjene og kan beregne areal og volum. Ved hjelp av Bluetooth blir Elma Laser 1 til et smart verktøy for dokumentasjon. Ta et bilde med smarttelefonen eller nettbrettet ditt, og dra raskt og enkelt målingene og kommentarene til bildet i den gratis Elma Link Appen, så kan du dele det via e-post eller andre videreformidlingsapper på enheten din. Elma Laser 1 gjør det raskt å måle romdimensjoner, takhøyde osv. Instrumentet leveres klart til bruk inkludert batterier og bruksanvisning.

The EASYTEST kit, is a combination of a tone transmitter and a inductive trace probe. The trace probe is easy to use and solves problems in searching, identifying and trace cable installations. EASYTEST is able to find insulated cables on distances up to 60 cm, and is able to follow the cables up to 15 km. The instrumentet is able to trace/finding cables, split pairs, pairs, reversed pairs, short curcuits, disconnected leads and more. EASYTEST is an ideal instrument for the telecommunication/network installer tracing a single wirepair, the alarm installer who has to trace the cable route to the alarm system, the electrical installer who has to trace the cabling in a building and more. EASYTEST is used a vary of apllications where it is not possible to find a cable/wire phusical or visual. EASYTEST is even more equipped with two Talk-sets and is therefore able to use two way communication in systems up to 15 km. a very userable feature in places, where it s not possible to use walkie-talkies or mobile phones. Easytest can be conencted via the RJ 11 connector or the supplied crocodile clips. Technical data: Voltage protection: 110V AC/240V DC Range: 15 km Battery transmitter: 1x9V 6F22 (excl.) Battery receiver: 1x9V 6F22 (excl.) Size/weight transmitter: 68 x 96 x 25 mm / 150 g Size/weight receiver: 220 x 40 x 25 mm / 80 g

ELMA CM01 har en liten klemmemåler i et veldig praktisk design. Instrumentet har overlegen oppløsning og både 3 3/4-sifret display og analog stolpediagram. ELMA CM01 er utstyrt med automatisk nulljustering, min / max-minne, datahold og måler strøm AC / DC, spenning AC / DC, motstand, frekvens og kontinuitet. Instrumentet oppfyller IEC 61010-1 CAT II 600V og CAT III 300V og leveres komplett i pose inkludert testledninger, batteri og bruksanvisning. Tekniske data: Strøm AC / DC: 0-40-200A Oppløsning: 0,01 til 0,1 A Nøyaktighet: ±1% +2D Spenning AC / DC: 0-400V Motstand: ​​0-400 Frekvens: ​​0-1000kHz Display :3 sifre på fire sifre Maks visning :3999 Klemmebredde :24 mm Batteri :2x1 ,5 V LR6 (inkl.) Dimensjoner :180x50x29 mm Vekt :200 g