Thermal Grizzly – Kjølepasta og kjøleløsninger til PCer

High-end thermal paste. Kryonaut thermal grease was created especially for the extremely demanding applications and the highest expectations of the overclocking community. Kryonaut is also highly recommended as a top product for critical cooling systems in the industrial environment.

• Designed for Overclocking
• Excellent thermal conductivity
• No curing
• Long-term durability
• No electrical conductivity!

Kryonaut uses a special structure, which halts the drying out process at temperatures of up to 80° Celsius. This structure is also responsible for the nano-aluminum- and zinc-oxide-parts included in the grease to compound optimally, to compensate for unevenness of the component (i.e. the CPU) or the heat sink, thus achieving remarkable heat transfer.
 

The PhaseSheet PTM is a thermal pad based on a phase change material (PCM). The pads, which are solid at room temperature, can be easily applied and liquefy during operation, allowing them to effectively dissipate heat like a thermal paste. PhaseSheet PTM is electrically non-conductive and can therefore be used in many areas, with the primary application being in processors and graphics chips.

Thermal putty acts as an electrically non-conductive, flexible gap filler for replacing thermal pads on GPUs and compensates height differences from 0.2 mm to 3.0 mm while remaining easy to apply.

The TG Putty line is available in three variants with differing thermal conductivity and is supplied with spatulas to enable straightforward, large-area application.

• Electrically non-conductive alternative to conventional thermal pads


• Compensates gaps from 0.2–3.0 mm


• Three variants: Basic (medium), Advance (good), Pro (excellent) thermal conductivity


• Includes three spatulas for application


• Operating temperature range −40°C to +120°C


• Not suitable for use on processors (IHS or Direct Die) or directly on the GPU die


• Apply only to clean, degreased surfaces (e.g., TG Cleaning Wipes or isopropanol)

Suited for replacing VRAM and VRM pads on single and larger graphics cards and for converting coolers to GPU water cooling setups.

CPU contact sealing frame, rød/svart, svart

Flytende metall kjølepasta, sølvpasta, densitet: 6,29 g/cm³, driftstemperatur: -50 - 200° C, 1 gram

Thermal Grizzly Duronaut er en høytytende termisk pasta som er utviklet for utmerket varmeoverføring og langvarig stabilitet.

Viktige egenskaper:

• Ekstremt holdbar
• Høy varmeledningsevne
• Ikke-ledende og trygg for elektronikk

Pakken inkluderer:

• 1x Duronaut termisk pasta 2g
• 1x applikator
• 1x TG Spatel
• 1x TG Spatel Pro

Termopute, rødbrun (en pakke 2 )

Termisk pasta, Thermal Grizzly Duronaut Pro 6g, kombinerer utmerket varmeledningsevne, ekstrem langtidsstabilitet, elektrisk ikke-ledende egenskaper og uten herding over tid for krevende PC- og industrielle kjølesystemer.

Den spesialutviklede silikonoljen, aluminiummikropulveret og sinkoksidnanopulveret bidrar til å minimere pump-out-effekten, forbedre heft til overflaten og redusere termisk kontaktmotstand.

Pakken inkluderer Duronaut Pro 6g, en applikator, TG Spatula og TG Spatula Pro for effektiv utsmøring i tynne påføringslag.

Ideell for gamere, overklokkere og krevende kjøleoppsett som trenger holdbar og effektiv varmeoverføring mellom CPU og kjøler.

The graphene thermal pads of the Thermal Grizzly KryoSheet series can be used as an excellent alternative for thermal compounds from the higher performance segment. Similar to Carbonaut pads, they have a conformable surface with very high thermal conductivity. Compared to Carbonaut pads, KryoSheet as a high-end product offers significantly higher thermal conductivity.

This increased thermal conductivity is not only due to the choice of material, but also to the innovative manufacturing process. KryoSheet does not contain any liquid components and is therefore not subject to normal ageing as is the case with traditional thermal paste. Drying out is not possible.

• Outstanding thermal conductivity
• Easy to use
• Consistently high performance
• Extreme durability

Attention: Electrically conductive! Follow instructions!

The graphene thermal pads of the Thermal Grizzly KryoSheet series can be used as an excellent alternative for thermal compounds from the higher performance segment. Similar to Carbonaut pads, they have a conformable surface with very high thermal conductivity. Compared to Carbonaut pads, KryoSheet as a high-end product offers significantly higher thermal conductivity.

This increased thermal conductivity is not only due to the choice of material, but also to the innovative manufacturing process. KryoSheet does not contain any liquid components and is therefore not subject to normal ageing as is the case with traditional thermal paste. Drying out is not possible.

• Outstanding thermal conductivity
• Easy to use
• Consistently high performance
• Extreme durability

Attention: Electrically conductive! Follow instructions!

CPU Contact Frame improves cooling by shifting contact pressure to the edges, preventing IHS concavity and enabling better cooler contact on Intel LGA1700 sockets.

The Thermal Grizzly CPU Contact Frame Intel 1700 LT is the injection-molded "Lite" mounting frame made from ABS reinforced with 15% glass fiber that replaces the standard ILM to increase contact surface and simplify installation.

• Injection-molded ABS with 15% glass fiber for added stability


• Inner contour shifts pressure from centre to edges to avoid concave IHS


• Designed for Intel LGA1700; compatible with 12th, 13th and 14th Gen CPUs


• Only for CPUs whose IHS has been ground down by no more than 0.2 mm


• Includes 4 pan-head screws (UNC 3/8"), 5/64" hex socket wrench and Torx T20 angle wrench

Simple installation and improved cooler contact can lead to noticeably lower CPU temperatures depending on the cooler and processor.

Termisk pasta, designet for Overclocking, 14,2 W/m*K termisk ledningsevne, ingen herding, 2 gram

Thermal putty is an electrically non-conductive, flexible gap filler that replaces conventional thermal pads on GPUs and bridges height differences from 0.2 to 3.0 mm.

Formulated for GPU modifications, TG Putty is easy to shape for precise contact with VRAM and SMD components and can be applied broadly with a spatula or formed by hand.

• Electrically non-conductive alternative to thermal pads


• Fills gaps from 0.2 to 3.0 mm for consistent contact


• Apply with spatulas or by hand (gloves recommended)


• Available in variants with different thermal conductivities


• Operating range −40°C to +120°C


• Not suitable for use on processors (IHS or direct die) or directly on the GPU die

Easy to shape and tailor-made for memory and voltage-regulator contacts, it simplifies GPU pad replacement and cooler modifications.

GPU-strømovervåkingsenhet for grafikkort med 12V-2x6-kontakter, med strøm-måling per pin, kontinuerlig overvåking, en TFT-IPS-skjerm, datalogging og aktiv kjøling.

Thermal Grizzly WireView Pro II er utviklet for å overvåke sikkerhetsrelevante verdier som strøm, spenning, temperatur og strømforbruk, med visuelle og hørbare varsler når konfigurerte grenser overskrides.

• Overvåking av strøm, spenning og effekt per pin
• Automatisk logging av relevante driftsdata
• Semipassiv vifte og CNC-maskinert aluminiumskabinett
• USB-C-støtte for firmwareoppdateringer utført av brukeren

Den gir tydelig innsikt i belastning på GPU-kontakter og temperaturatferd for mer informert systemovervåking.

Thermal pads offer improved thermal conductivity, high compressibility and electrical insulation for reliable heat transfer on SSDs, GPU coolers and other electronic components.

The Minus Pad Advance series refines the proven Minus Pad 8 formula with enhanced thermal performance and easier handling, making it suitable for SSDs, GPU water coolers, voltage regulators and memory modules.

• Electrically non-conductive for safe component contact


• Excellent thermal conductivity to aid heat dissipation


• High compressibility for better surface conformity


• Easy to use on a variety of cooling applications

Designed to improve heat transfer in compact cooling setups while remaining simple to apply.

Thermal pads deliver electrically non-conductive heat transfer with improved thermal conductivity, high compressibility and straightforward application.

The Minus Pad Advance series builds on the proven Minus Pad 8 and offers enhanced thermal conductivity and compressibility compared to the Basic pads, suitable for SSDs, GPU coolers, GPU water coolers, voltage regulators and memory modules.

• Electrically non-conductive material


• Improved thermal conductivity


• High compressibility for uneven surfaces


• Easy to use and cut to size


• Size: 120 x 20 mm · Thickness: 2.0 mm · Color: black


• Pack content: 4 pcs

Ideal for reliable thermal coupling across a range of electronic components where consistent heat transfer is needed.

Thermal putty that serves as an electrically non-conductive, flexible gap filler for replacing thermal pads on GPUs and compensates for height differences from 0.2 to 3.0 mm.

TG Putty is easy to apply with the supplied spatulas or by hand (gloves recommended) and is available in Basic, Advance and Pro variants that differ by thermal conductivity.

• Electrically non-conductive alternative to conventional thermal pads


• Fills gaps from 0.2–3.0 mm for VRAM, VRM and SMD components


• Apply broadly with spatulas or shape into small pellets for precise placement


• Not suitable for use on processors (IHS or Direct Die) or directly on the GPU die


• Operating temperature range −40°C to +120°C


• Advance variant includes three spatulas for application

Designed for GPU modifications and cooler conversions, it adapts to varied factory pad thicknesses for tailored thermal contact.

Termisk pasta Thermal Grizzly Duronaut Pro tilbyr utmerket varmeledningsevne, ekstrem langtidsstabilitet, elektrisk ikke-ledende bruk og uten herding over tid.

Duronaut Pro er en high-end termisk pasta utviklet for gamere, overklokkere og krevende industrielle kjølesystemer, med silikonolje med aluminiummikropulver og sinkoksidnanopulver.

• Minimerer pump-out-effekten med optimalisert partikkelform og -størrelse
• Støtter tynne påføringslag for lav termisk kontaktmotstand
• Inkluderer applikator, TG Spatula og TG Spatula Pro
• Innhold: 2 g

Utviklet for effektiv varmeoverføring mellom varmekilde og kjøler, bidrar Duronaut Pro til å opprettholde pålitelig kjøleytelse over tid.

Thermal Grizzly TG Remove er en acetonebasert nano-renser for best mulig rengjøring av termisk pasta. I tillegg har TG Remove en avfettingsvirkning som hjelper med å forberede overflaten for ny påføring, f.eks. på CPUer.

Termomasse, lysegrå

Termopute, rødbrun

Grease spatula (en pakke 3)

Thermal Grizzly Duronaut is a high-performance thermal paste designed for excellent heat transfer and long-term stability.

Key features:
✔ Extremely durable
✔ High thermal conductivity
✔ Non-conductive & safe for electronics

Package includes:

1x Duronaut thermal paste 6g
1x Applicator
1x TG Spatula
1x TG Spatula Pro
 

The electrically non-conductive Minus Pad Advanced thermal pads are part of the Minus Pad Basic, Advance, and Pro series. Based on the proven minus pad 8, this series has been specifically further developed to significantly improve thermal conductivity, compressibility, and price-performance ratio. The thermal pads are suitable for SSDs, GPU coolers, GPU water coolers, as well as electronic components such as voltage regulators and memory modules.

• Excellent thermal conductivity
• High compressibility
• Easy to use
• Electrically non-conductive

Comparison of the Minus Pad Basic-, Advance-, and Pro series:

• Minus Pad Basic: Good thermal conductivity, slightly lower compressibility, and excellent price-performance ratio.
• Minus Pad Advance: Improved thermal conductivity, higher compressibility.
• Minus Pad Pro: Outstanding thermal conductivity and exceptional compressibility – at a slightly higher Price.
   

Termiske puter leverer høy varmeledningsevne med en svært elastisk, fleksibel overflate utviklet for å kompensere selv for de minste mellomrommene mellom komponenter.

Thermal Grizzly Minus Pad 8 er enkel å bearbeide og feste med lett trykk, og bruker en keramisk silikonformel-kompleks og nano aluminiumoksid for å støtte konstant, optimal varmeoverføring i et bredt utvalg av størrelser og tykkelser.

• Høy varmeledningsevne
• Høy komprimerbarhet
• Elektrisk isolasjon
• RoHS-kompatibel

Pålitelig kontakt og effektiv varmeoverføring bidrar til å holde følsomme komponenter termisk tilkoblet og stabile.