Thermal Grizzly Putty Advance 30 g - Kjølepasta
Thermal putty that serves as an electrically non-conductive, flexible gap filler for replacing thermal pads on GPUs and compensates for height differences from 0.2 to 3.0 mm.
TG Putty is easy to apply with the supplied spatulas or by hand (gloves recommended) and is available in Basic, Advance and Pro variants that differ by thermal conductivity.
- Electrically non-conductive alternative to conventional thermal pads
- Fills gaps from 0.2–3.0 mm for VRAM, VRM and SMD components
- Apply broadly with spatulas or shape into small pellets for precise placement
- Not suitable for use on processors (IHS or Direct Die) or directly on the GPU die
- Operating temperature range −40°C to +120°C
- Advance variant includes three spatulas for application
Designed for GPU modifications and cooler conversions, it adapts to varied factory pad thicknesses for tailored thermal contact.
TG Putty is an electrically non-conductive alternative to conventional thermal pads. As an easy-to-apply and flexible gap filler, it compensates for height differences, making it ideal as a replacement for thermal pads on GPUs. Graphics cards typically feature several types of thermal pads of varying thicknesses from the factory, requiring different pads during replacement or when converting the cooler to a GPU water cooler.
TG Putty can be applied using the included spatulas or by hand (gloves recommended). The spatula allows for broad application, while by hand, it can be shaped into small pellets tailored to the surface size (e.g., VRAM, SMD). TG Putty can fill height differences ranging from 0.2 to 3.0 mm.
TG Putty is available in three variants, primarily differing in their thermal conductivity:
- TG Putty Basic: Medium thermal conductivity
- TG Putty Advance: Good thermal conductivity
- TG Putty Pro: Excellent thermal conductivity
For modifying a single, smaller graphics card without an active backplate (e.g., GeForce GTX 1060), approximately one 30-gram container of TG Putty is required. For larger graphics cards, such as a GeForce RTX 4090, one 30-gram container is generally sufficient for the memory (VRAM) and voltage regulators (VRM) on the front side. On the backside, there is often a uniform, larger gap between the PCB and the backplate on larger graphics cards. In this case, approximately two 30-gram containers are needed to completely fill this gap.
Notes:
TG Putty is not suitable for use on processors (IHS or Direct Die) or directly on the GPU die!
Before application, the target surface should be thoroughly cleaned and degreased, for example, using TG Cleaning Wipes or conventional isopropanol.
Scope of Delivery
- Thermal Putty Advanced
- 3x Spatulas
Kabinett-tilbehør
-
DUTZO Air Duster Turbo
På lager - 1-3 dager til levering399,00 krOrd. pris 749,00 kr -
DUTZO Air Duster/Blåser - 1 hastighet
På lager - 1-3 dager til levering289,00 krOrd. pris 449,00 kr -
DUTZO Air Duster Pro - 3 hastigheter
På lager - 1-3 dager til levering399,00 krOrd. pris 749,00 kr
-
DUTZO Air Duster & Støvsuger 2-i-1 - 3 hastigheter
Bestilt: forventet på lager d. 07.08.2026899,00 kr
Prosessor-kjøler
-
dezen Thermal Compound 4.63 W - 2 g - Kjølepasta
På lager - 1-3 dager til levering25,00 krOrd. pris 49,00 kr
Egenskaper
Vekt og dimensjoner
Datainnpakking
Ovenstående informasjon/spesifikasjoner er veiledende og kan uten varsel bli endret av produsenten. Det tas forbehold om trykkfeil og illustrerende bilder. Enkelte tekster kan være autogenerert eller maskinoversatt, så derfor kan det forekomme tekster som virker misvisende.




