Drivere, spoler og transformatorer - side 3

• LED driver for cabinet lighting and mini downlights (350mA), 6 outputs
• Dimmable – leading or trailing edge
• Built-in thermofuse with auto reset
• Quick and easy installation
• Can be fastened by screws
• Do NOT plug in any LED lamps, when connected to power

Rask LED-strømforsyning, 20W, 24Vdc og IP20Super tynn LED-driver.

Mean Well LED power supply, 150W, 12Vdc, IP67.The power supply is adjusted up to 13Vdc as a special item.LED driver is suitable for both indoor and outdoor use and wet rooms due. IP protection class is 67.

An energy-efficient solutionHF-Performer EII PL-T/C/R/T5c is a slim and high-frequency electronic ballast for a wide range of CFL- ni applications. It is ideal for applications where high energy efficiency is required. The HF-Performer EII range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2). Product Benefits • Robust design that meets all relevant international safety and performance standards and ensures good energy efficiency • Automatic restart (after voltage dip or lamp exchange) ensures easy operation and hassle-free re-lamping • Suitable for DC emergency operation, 186 to 275 V (at -10 oC) and in line with IEC/EN 60598-22 luminaire normsProduct Features • 50,000-hour lifetime at maximum case temperature, combined with over 60,000 on/off switches on one lamp • Programmed, flicker-free, pre-heated start (< 1.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections. Applications • Ideal for commercial indoor lighting applications where it is necessary to reduce the wattage per square meter or operating costs • Used with movement-detection control systems like Philips OccuPlus • Mainly for indoor applications such as spotlights, downlights and recessed fixtures used largely in retail stores, office buildings, supermarkets, hotels, convenience stores • Industrial premises with long operating hours

Rask LED-strømforsyning, 250W, 24Vdc og IP20. Tynn LED-driver.

Philips 913700648666 ikke kategorisert

Inverter-serien skiller seg ut ved at den kan leveres i 2 forskjellige monteringsformer, kompakt eller bokform, etter behov for svært høy motorstyring i åpen sløyfe

20W driver for LED-spor med 3000 mm kabel og sokler. 1-10V dimming. Impulsdimming. NB! Ikke fase-dimming. SG gir 5 års systemgaranti på produktet, som er effektiv fra idriftsettelse.

An energy-efficient solutionHF-Performer III TL5 is a slim and high-frequency electronic ballast for TL5 and TL5 Eco fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF-Performer III range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2 BAT). Product Features • Robust design for 100,000 hours lifetime at Ta = 50 C and over 100,000 on/off switching operations on one lamp • Programmed, flicker-free, pre-heated start (< 0.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections • The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring. Product Benefits • Optimal savings can be achieved using HF-PIII together with TL5 ECO lamps (system solution). • The programmed start enables the lamp to be switched on and off without reducing useful lamp life. • DC emergency operation in line with IEC/EN 60598-22 luminaire norms • Suitable for luminaires in protection class I and, after testing, class IIApplications • Used with movement-detection control systems like Philips OccuPlus • Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools • Class I outdoor applications, e. g. industrial premises and parking lot

Transformer300/1-EK halopower 1X300VA Product description: Single-phase lighting transformer for 12 Volt halogen lighting, designed and manufactured as a safety transformer according to EN61558-2-6. CE marked. Encapsulated in plastic and cast in self-extinguishing polyurethane. Insulation class II - double insulated. Short-circuit proof and protected against...

1-phase lighting transformer for 12 Volt halogen lighting, designed and manufactured as safety transformer according to EN61558-2-6. CE mark. Plastic encapsulated and embedded in self-extinguishing polyurethane. Insulation class II - double insulated. Short-circuit-proof and protected against overload with built-in PTC fuse. High and low output voltage. Compact size and easy mounting on ceiling or wall. Standard version is supplied with 2 meter primary cable w / plug. Can be dimmed with dimmer designed for transformer load. Scope: The compact format of the HaloPower Mini series makes it very useful in the furniture industry and in residential and kitchen appliances. Clamp connection max. 4mm2. Possibility of 6 outputs with Halo-Power Mini circuit board. Do not mount in insulation material due to heat.

HF-Regulator II for TL-D lamps – Dimming: a next step in energy savingHigh-frequency electronic dimming ballast, using the analog protocol (1-10 V) for TL-D lampsProduct Benefits • The lamp power can be dimmed from 1 to 100% via the Analog control input (in accordance with the 1-10 V industry standard) • Compliant with European and Asian norms and suitable for emergency lighting systems • HF operation improves light quality, lamp lifetime • Combined with controls, additional energy savings can be achievedProduct Features • Programmed start: flicker-free ignition < 0.5 seconds and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life • Smart power ensures constant light, independent of mains fluctuations. • Up to 60% reduction in energy consumption by using automatic lighting control systems • Stop circuit is activated within 5 seconds in the event of lamp failure (safety stop), and ballast resets automatically after lamp replacementApplications • Indoor, general and task lighting applications in combination with lighting control systems (personal control, daylight linking and/or movement detection)

Product features • Supply voltage: 220...240 V • Line voltage: 198...264 V • Line frequency: 0 Hz, 50 Hz...60 Hz • Lamp start with optimum filament preheating • Automatic shutdown of defective lamps and at end of life (EoL) • Safety: to EN 61347-2-3 • Lamp operation: to EN 60929 • RI suppression: to EN 55015:2006+A1:2007+A2:2009/CISPR 15 • Line harmonics: to EN 61000-3-2 • Immunity: to EN 61547 Product benefits • Perfect lamp start for applications with motion sensors • Automatic restart after lamp replacement Areas of application • Suitable for use in emergency lighting systems as per EN 50172/DIN VDE 0108-100

High quality and robust performanceHigh-quality, compact and lightweight HID electronic gear for optimal and reliable performance of 20, 35, 50 and 70 W CDM lampsProduct Features • Minimal lamp power spread • Low gear energy losses • Lamp end-of-life detection • High Tambient and Tcase temperatures • Long lifetime of 40,000 hours Product Benefits • Optimal lamp performance thanks to minimal lamp power tolerance • CDM lamp life increased by up to 30% • Eliminates all visible lamp flickerApplications • Accent and decorative lighting for shops, public spaces, lobbies and offices • Suitable for indoor use only

Rask LED-strømforsyning, 320W, 24Vdc og IP20. LED-driver.

Rask LED-strømforsyning, 150W, 24Vdc, IP20Super tynn LED-driver.

• LED driver for cabinet lighting and mini downlights (350mA), 6 outputs
• Dimmable – leading or trailing edge
• Dip switch enables 350mA or 500mA
• Built-in thermofuse with auto reset
• Quick and easy installation
• Can be fastened by screws
• Do NOT plug in any LED lamps, when connected to power

Product features • Energy Efficiency Index EEI: A2 • Supply voltage: 220...240 V • Line frequency: 50...60 Hz • RI suppression: to EN 55015/CISPR 15 • Safety: to EN 61347-2-12 • Line harmonics: to EN 61000-3-2 • Immunity: to EN 61547 Product benefits • Extended terminal section enables mains looping • Screw-down cable clamps for reliable strain relief • Long reliable life at maximum permitted temperatures • Automatic safety shutdown of lamps in the event of a defect or at end of life (EoL) Areas of application • Shop lighting • Health and fitness areas • Effect and accent lighting Equipment / Accessories • Precabled versions available on request

Product features • Supply voltage: 220...240 V • Line voltage: 198...264 V • Line frequency: 0 Hz, 50 Hz...60 Hz • Lamp start with optimum filament preheating • Life time: >100,000 h (for T = 65°C at Tc) • Energy Efficiency Index EEI: A2 BAT • Automatic shutdown of defective lamps and at end of life (EoL) • Safety: to EN 61347-2-3 • Lamp operation: to EN 60929 • RI suppression: to EN 55015:2006+A1:2007+A2:2009/CISPR 15 • Line harmonics: to EN 61000-3-2 • Immunity: to EN 61547 Product benefits • Perfect lamp start for applications with motion sensors • Automatic restart after lamp replacement

Schneider Electric ATV12HU22M2 frekvenskonverterer

Energieffektivt, smalrammet LED-panel for et moderne utseende. En høykvalitets allroundpanel som kan brukes i alle typer miljøer. Kan installeres i tak med synlige T-skinner uten tilbehør og i tak med skjulte T-skinner med tilbehør. Veldig lav blending opal prismatisk skjerming, UGR <18. Faseattenuering eller DALI avhengig av hvilken driver som er valgt (driver og nødbelysningsboks bestilles separat).

EL1/2X18-42TCS 220-240V/50-60HZ Produktbeskrivelse: HF-ballast

Rask LED-strømforsyning, 50W, 12Vdc og IP20Super tynn LED-driver.

Printkort G3642E miniprint 6/K for noratel