Drivere, spoler og transformatorer - side 4

An energy-efficient solutionHF-Performer III TL5 is a slim and high-frequency electronic ballast for TL5 and TL5 Eco fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF-Performer III range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2 BAT). Product Features • Robust design for 100,000 hours lifetime at Ta = 50 C and over 100,000 on/off switching operations on one lamp • Programmed, flicker-free, pre-heated start (< 0.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections • The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring. Product Benefits • Optimal savings can be achieved using HF-PIII together with TL5 ECO lamps (system solution). • The programmed start enables the lamp to be switched on and off without reducing useful lamp life. • DC emergency operation in line with IEC/EN 60598-22 luminaire norms • Suitable for luminaires in protection class I and, after testing, class IIApplications • Used with movement-detection control systems like Philips OccuPlus • Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools • Class I outdoor applications, e. g. industrial premises and parking lot

Driver 25W 350 mA er en dimbar driver levert med en fordelingsboks med 6 utganger for praktisk installasjon.

Driveren er en del av en serie som finnes i 4W, 9W, 18W og 25W, og er designet for bruk med vanlige lysdimmere på markedet.

Et egnet valg når du trenger en 25W-driver med dimmestøtte og flere utgangstilkoblinger.

Dimming the next step in energy savingThis intelligent high-frequency electronic dimming ballast utilizes the DALI or Touch and Dim push-button protocol for fluorescent lamps. It meets A1BAT requirements, thereby pre-empting upcoming legislation. With a special command you can retrieve the system’s mains power consumption, and with another you can find out which lamp wattage is connected. Combined with controls, additional energy savings can be achieved. Product Benefits • Extremely low stand-by losses, controlled cut-off for dim levels above 80%, hybrid control dimming (current control at 100% and power control at 1%) – combined with MASTER TL5 Eco the most energy-efficient solution • HF operation improves light quality and lamp lifetime. • Compliant with European and Asian norms and suitable for emergency lighting systemsProduct Features • HF-R Intelligent recognizes what type of lamp (T5 HE, HO, ECO, TL-D, PL-L) is connected and drives it accordingly • Programmed start: flicker-free ignition < 1.0 second and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life • Smart power ensures constant light, independent of mains fluctuations and dimming from 1 to 100% • Stop circuit is activated within 5 seconds in the event of lamp failure (safety stop), and ballast resets automatically after lamp replacement • Programmable for intelligent functionalities via Philips MultiOne: Corridor mode, Emergency DC dim level, Burn-in timeEnvironment • The HF-R intelligent will recognize which lamp is connected and will drive it accordingly • Extremely low energy consumption in stand-by (0.25 W) • Optimized for MASTER TL5 Eco lamps • RoHS and ISO 14000-compliant • EEI = A1 BAT (Best available technology)Application • Indoor, general and task lighting applications in combination with lighting control systems (personal con

Transformer 70/1-KT mini 70VA Produktbeskrivelse: Enkeltfase belysningstransformator for 12 Volt halogenbelysning, designet og produsert som en sikkerhetstransformator i henhold til EN61558-2-6. CE-merket. Innkapslet i plast og støpt i selvslukkende polyuretan. Isolasjonsklasse II - dobbeltisolert. Kortslutningsbestandig og beskyttet mot overbelastning...

Schneider Electric ATV320U22N4B frekvenskonverterer

An energy-efficient solutionHF-Performer EII PL-T/C/R/T5c is a slim and high-frequency electronic ballast for a wide range of CFL- ni applications. It is ideal for applications where high energy efficiency is required. The HF-Performer EII range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2). Product Benefits • Robust design that meets all relevant international safety and performance standards and ensures good energy efficiency • Automatic restart (after voltage dip or lamp exchange) ensures easy operation and hassle-free re-lamping • Suitable for DC emergency operation, 186 to 275 V (at -10 oC) and in line with IEC/EN 60598-22 luminaire normsProduct Features • 50,000-hour lifetime at maximum case temperature, combined with over 60,000 on/off switches on one lamp • Programmed, flicker-free, pre-heated start (< 1.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections. Applications • Ideal for commercial indoor lighting applications where it is necessary to reduce the wattage per square meter or operating costs • Used with movement-detection control systems like Philips OccuPlus • Mainly for indoor applications such as spotlights, downlights and recessed fixtures used largely in retail stores, office buildings, supermarkets, hotels, convenience stores • Industrial premises with long operating hours

Produktegenskaper • Forsyningsspenning: 220...240 V • Linjespenning: 198...264 V • Linjefrekvens: 50...60 Hz • Lampestart med optimal filamentoppvarming • Automatisk avstenging av defekte lamper og ved slutten av levetiden (EoL T.2) • Sikkerhet: til EN 61347-2-3 • RI-undertrykkelse: til EN 55015:2006+A1:2007+A2 :2009/CISPR15 • Linjeharmonikk : til EN61000-3-2 Produktfordeler Automatisk omstart etter lampeskift

Schneider Electric ATV320D15N4B frekvenskonverterer Svart

Produktfordeler: Lang lampelevetidIngen negative effekter av hyppig på/av-brytingAutomatisk omstart etter lampeskiftePerfekt lampestart for applikasjoner med bevegelsessensorerVDE/VDE EMC-sertifisert systemSvært høy energieffektivitet på grunn av kutt-teknologiBruksområder: Åpne kontorlandskap, korridorer og lagringsromOffentlige bygningerStripelysEgnet for nødbelysning (DC-drift)Egnet for armaturer i beskyttelsesklasse I

ECG for FL and CFL - not dimmable. Product benefits: • Long lamp life • No adverse effect from frequent on/off switching • Automatic restart after lamp replacement • Perfect lamp start for applications with motion sensors • VDE/VDE EMC certified system • Very high energy efficiency due to cut-off technology • Areas of application: • Emergency lighting systems acc. to EN 50172 / DIN VDE 0108-100, industry, open-plan offices, corridors and storage rooms, public buildings, sports halls and factories, strip lighting • Suitable for emergency lighting (DC operation) • Modernization of existing systems. Product features: • Supply voltage: 220...240 V • Line voltage: 198...264 V • Line frequency: 0 Hz, 50 Hz...60 Hz • Lamp start with optimum filament preheating • Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate) • Energy Efficiency Index EEI: A2 BAT • Automatic shutdown of defective lamps and at end of life (EoL T.2) • Safety: to EN 61347-2-3 • Lamp operation: to EN 60929

For flexibility in luminaire design and stock-keeping managementHF-Performer Intelligent for Master and ECO TL5 HE/HO, TL-D and PL-L lampsHF-Performer Intelligent features automatic recognition of the connected lamp and is independently able to adjust its operation parameters exactly to the respective lamp. This results in a substantial benefit, especially for T5 lamps, as it means TL5 HE and HO lamps of the same length can be interchanged. With a choice of seven ballasts, the customer is able to handle efficiently every possible combination of Master TL5 and Eco, TL-D, and PL-L lamps. Product Benefits • Maximum reliability in system operation, and flexibility for designers, operators and facility managers in terms of stock-keeping management • Multi-power technology for precise operation of multiple lamp types of various wattages • Optimized for high maintenance efficiency and reliability: 5-year warrantyProduct Features • Highest CELMA Energy Efficiency I