Drivere, spoler og transformatorer - side 2

LED-transformator 12 V (DC)/50 W
12 V DC for LED-er opp til totalt 50 W belastning

LED-spot som passer perfekt under skap eller andre steder med begrenset plass. LEDstar er laget av pulverlakkert støpt aluminium og er tilgjengelig i hvit, krom eller børstet utførelse. Kan installeres eller monteres på overflaten. Det følger med en 3 meter kabel som gjør tilkobling til driveren enkel (driver selges separat)

Energieffektivt, smalrammet LED-panel for et moderne utseende. En høykvalitets allroundpanel som kan brukes i alle typer miljøer. Kan installeres i tak med synlige T-skinner uten tilbehør og i tak med skjulte T-skinner med tilbehør. Veldig lav blending opal prismatisk skjerming, UGR <18. Faseattenuering eller DALI avhengig av hvilken driver som er valgt (driver og nødbelysningsboks bestilles separat).

LED-driver, 20 watt, 1670 mA

HF-Performer Intelligent for Master and ECO TL5 HE/HO, TL-D and PL-L lamps. HF-Performer Intelligent har automatisk gjenkjenning av den tilkoblede lampen og er uavhengig i stand til å justere driftsparametrene nøyaktig til den respektive lampen. Dette gir en betydelig fordel, spesielt for T5-lamper, da det betyr at TL5 HE og HO-lamper med samme lengde kan byttes ut. Med et valg av syv ballaster kan kunden håndtere effektivt alle mulige kombinasjoner av Master TL5 og Eco-, TL-D- og PL-L-lamper.

LED-transformator 24 V (DC)/15 W
24 V DC for LED-er opp til totalt 15 W belastning

Constant Current LED Driver / 30 W
dimmable, 12 V DC for LEDs up to 30 W total load

HF-Regulator II for TL-D lamps – Dimming: a next step in energy savingHigh-frequency electronic dimming ballast, using the analog protocol (1-10 V) for TL-D lampsProduct Benefits • The lamp power can be dimmed from 1 to 100% via the Analog control input (in accordance with the 1-10 V industry standard) • Compliant with European and Asian norms and suitable for emergency lighting systems • HF operation improves light quality, lamp lifetime • Combined with controls, additional energy savings can be achievedProduct Features • Programmed start: flicker-free ignition < 0.5 seconds and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life • Smart power ensures constant light, independent of mains fluctuations. • Up to 60% reduction in energy consumption by using automatic lighting control systems • Stop circuit is activated within 5 seconds in the event of lamp failure (safety stop), and ballast resets automatically after lamp replacementApplications • Indoor, general and task lighting applications in combination with lighting control systems (personal control, daylight linking and/or movement detection)

Dimming the next step in energy savingThis intelligent high-frequency electronic dimming ballast utilizes the DALI or Touch and Dim push-button protocol for fluorescent lamps. It meets A1BAT requirements, thereby pre-empting upcoming legislation. With a special command you can retrieve the system’s mains power consumption, and with another you can find out which lamp wattage is connected. Combined with controls, additional energy savings can be achieved. Product Benefits • Extremely low stand-by losses, controlled cut-off for dim levels above 80%, hybrid control dimming (current control at 100% and power control at 1%) – combined with MASTER TL5 Eco the most energy-efficient solution • HF operation improves light quality and lamp lifetime. • Compliant with European and Asian norms and suitable for emergency lighting systemsProduct Features • HF-R Intelligent recognizes what type of lamp (T5 HE, HO, ECO, TL-D, PL-L) is connected and drives it accordingly • Programmed start: flicker-free ignition < 1.0 second and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life • Smart power ensures constant light, independent of mains fluctuations and dimming from 1 to 100% • Stop circuit is activated within 5 seconds in the event of lamp failure (safety stop), and ballast resets automatically after lamp replacement • Programmable for intelligent functionalities via Philips MultiOne: Corridor mode, Emergency DC dim level, Burn-in timeEnvironment • The HF-R intelligent will recognize which lamp is connected and will drive it accordingly • Extremely low energy consumption in stand-by (0.25 W) • Optimized for MASTER TL5 Eco lamps • RoHS and ISO 14000-compliant • EEI = A1 BAT (Best available technology)Application • Indoor, general and task lighting applications in combination with lighting control systems (personal con

HF-Regulator II for TL-D lamps – Dimming: a next step in energy savingHigh-frequency electronic dimming ballast, using the analog protocol (1-10 V) for TL-D lampsProduct Benefits • The lamp power can be dimmed from 1 to 100% via the Analog control input (in accordance with the 1-10 V industry standard) • Compliant with European and Asian norms and suitable for emergency lighting systems • HF operation improves light quality, lamp lifetime • Combined with controls, additional energy savings can be achievedProduct Features • Programmed start: flicker-free ignition < 0.5 seconds and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life • Smart power ensures constant light, independent of mains fluctuations. • Up to 60% reduction in energy consumption by using automatic lighting control systems • Stop circuit is activated within 5 seconds in the event of lamp failure (safety stop), and ballast resets automatically after lamp replacementApplications • Indoor, general and task lighting applications in combination with lighting control systems (personal control, daylight linking and/or movement detection)

Mean Well LED strømforsyning, 320W, 24Vdc og IP67. LED-driveren er egnet for både innendørs og utendørs bruk og våtrom på grunn av IP-beskyttelsesklasse 67.

An energy-efficient solutionHF-Performer III TL-D is a slim and high-frequency electronic ballast for TL-D fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF-Performer III range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2 BAT). Product Features • Robust design for 100,000 hours lifetime at Ta = 50 C and over 100,000 on/off switching operations on one lamp • Programmed, flicker-free, pre-heated start (< 0.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections. Product Benefits • The programmed start enables the lamp to be switched on and off without reducing useful lamp life. • DC emergency operation in line with IEC/EN 60598-22 luminaire norms • Smart power ensures constant light, irrespective of mains-voltage fluctuations • Suitable for luminaires in protection class I and, after testing, class II • The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring. Application • Used with movement-detection control systems like Philips OccuPlus • Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools • Class I outdoor applications, e. g. industrial premises and parking lots

Rask LED-strømforsyning, 75W, 12Vdc, Ip20LED-driver.

Liten nedlys med polert reflektor for vinduer, skap og nisjer for å gi en fin stemningsfull belysning. Nano er tilgjengelig på 15 eller 36 grader og Nano Tilt, som kan rettes, har en spredningsvinkel på 36 grader. Leveres uten driver. Nanodriver (valgfritt) med maksimalt 9W og dimmet med 1-10V / pushdim.

Driver 9W 350 mA er en dimbar driver levert med en fordelingsboks med 6 utganger for fleksible belysningstilkoblinger.

Denne driverserien er kompatibel med vanlige lysdimmere på markedet og finnes i 4W-, 9W-, 18W- og 25W-versjoner.

Den gir en praktisk løsning for kontrollerte, dimbare belysningsinstallasjoner.

Fordelingsboks for LED-driver gir rask og korrekt tilkobling av produkter som Sofia LED minidownlights, med støtte for seriekobling ved 350 mA.

Boksen monteres på sekundærsiden av LED-driveren og er designet for å forenkle tilkoblingsoppsettet for flere tilkoblede LED-produkter.

• For bruk med LED-drivere
• Støtter seriekobling ved 350 mA
• Muliggjør tilkobling av opptil seks produkter
• Egnet for Sofia LED minidownlight-installasjoner

En praktisk driver-fordelingsboks for å lage et ryddig og korrekt LED-tilkoblingsoppsett.

Rask LED-strømforsyning, 75W, 24Vdc og Ip20LED-driver.

Robust design, compact formHF-Matchbox Red is an affordable, reliable, compact, lightweight and high-frequency ballast for use with system wattages below 25 W in combination with TL mini, TL-D, TL5 and TL5c, PL-T/C, and PL-L/S lamps. The HF-M Red range has a robust design, meets all relevant international safety and performance standards and has an energy efficiency index (CELMA EEI) of A2. Product Benefits • Can be operated with movement-detection control systems. • Automatic restart (after voltage dip or lamp exchange) ensures easy operation and hassle-free re-lamping. • Suitable for use in class I or class II luminairesProduct Features • Over 60,000 on/off switches on one lamp (depending on lamp/ballast combination) • Suitable for emergency DC operation between 190 and 254 V • Programmed, flicker-free, pre-heated start (<0.8 s) which allows the lamp to be switched on and off without reducing useful lamp lifeApplication • Used with movement-detection control systems like Philips OccuPlus • Mainly for indoor applications such as spotlights, downlights, light boxes, and emergency and security fixtures used largely in retail stores, office buildings, hotels, private homes and residential buildings • Domestic applications such as outdoor garden lighting, garage areas, stairways

Robust design, compact formHF-Matchbox Red is an affordable, reliable, compact, lightweight and high-frequency ballast for use with system wattages below 25 W in combination with TL mini, TL-D, TL5 and TL5c, PL-T/C, and PL-L/S lamps. The HF-M Red range has a robust design, meets all relevant international safety and performance standards and has an energy efficiency index (CELMA EEI) of A2. Product Benefits • Can be operated with movement-detection control systems. • Automatic restart (after voltage dip or lamp exchange) ensures easy operation and hassle-free re-lamping. • Suitable for use in class I or class II luminairesProduct Features • Over 60,000 on/off switches on one lamp (depending on lamp/ballast combination) • Suitable for emergency DC operation between 190 and 254 V • Programmed, flicker-free, pre-heated start (<0.8 s) which allows the lamp to be switched on and off without reducing useful lamp lifeApplication • Used with movement-detection control systems like Philips OccuPlus • Mainly for indoor applications such as spotlights, downlights, light boxes, and emergency and security fixtures used largely in retail stores, office buildings, hotels, private homes and residential buildings • Domestic applications such as outdoor garden lighting, garage areas, stairways

Robust design, compact formHF-Matchbox Red is an affordable, reliable, compact, lightweight and high-frequency ballast for use with system wattages below 25 W in combination with TL mini, TL-D, TL5 and TL5c, PL-T/C, and PL-L/S lamps. The HF-M Red range has a robust design, meets all relevant international safety and performance standards and has an energy efficiency index (CELMA EEI) of A2. Product Benefits • Can be operated with movement-detection control systems. • Automatic restart (after voltage dip or lamp exchange) ensures easy operation and hassle-free re-lamping. • Suitable for use in class I or class II luminairesProduct Features • Over 60,000 on/off switches on one lamp (depending on lamp/ballast combination) • Suitable for emergency DC operation between 190 and 254 V • Programmed, flicker-free, pre-heated start (<0.8 s) which allows the lamp to be switched on and off without reducing useful lamp lifeApplication • Used with movement-detection control systems like Philips OccuPlus • Mainly for indoor applications such as spotlights, downlights, light boxes, and emergency and security fixtures used largely in retail stores, office buildings, hotels, private homes and residential buildings • Domestic applications such as outdoor garden lighting, garage areas, stairways

Philips 913700698466 ikke kategorisert

Produktfordeler: Lang lampelevetidIngen negative effekter av hyppig på/av-brytingAutomatisk omstart etter lampeskiftePerfekt lampestart for applikasjoner med bevegelsessensorerVDE/VDE EMC-sertifisert systemSvært høy energieffektivitet på grunn av kutt-teknologiBruksområder: Åpne kontorlandskap, korridorer og lagringsromOffentlige bygningerStripelysEgnet for nødbelysning (DC-drift)Egnet for armaturer i beskyttelsesklasse I

Product features • Supply voltage: 220...240 V • Line voltage: 198...264 V • Line frequency: 0 Hz, 50 Hz...60 Hz • Lamp start with optimum filament preheating • Life time: >100,000 h (for T = 65°C at Tc) • Automatic shutdown of defective lamps and at end of life (EoL) • Safety: to EN 61347-2-3 • Lamp operation: to EN 60929 • RI suppression: to EN 55015:2006+A1:2007+A2:2009/CISPR 15 • Line harmonics: to EN 61000-3-2 • Immunity: to EN 61547 Product benefits • Perfect lamp start for applications with motion sensors • Automatic restart after lamp replacement

• LED driver for cabinet lighting and mini downlights (350mA), 6 outputs
• Dimmable – leading or trailing edge
• Built-in thermofuse with auto reset
• Quick and easy installation
• Can be fastened by screws
• Do NOT plug in any LED lamps, when connected to power

An energy-efficient solutionHF-Performer III TL-D is a slim and high-frequency electronic ballast for TL-D fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF-Performer III range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2 BAT). Product Features • Robust design for 100,000 hours lifetime at Ta = 50 C and over 100,000 on/off switching operations on one lamp • Programmed, flicker-free, pre-heated start (< 0.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections. Product Benefits • The programmed start enables the lamp to be switched on and off without reducing useful lamp life. • DC emergency operation in line with IEC/EN 60598-22 luminaire norms • Smart power ensures constant light, irrespective of mains-voltage fluctuations • Suitable for luminaires in protection class I and, after testing, class II • The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring. Application • Used with movement-detection control systems like Philips OccuPlus • Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools • Class I outdoor applications, e. g. industrial premises and parking lots