Viega - side 24

Viega 94243G

Adapter - gunmetal - loddet tilkobling, R-gjenge: 15, R: 34

Viega 94092G

Kobling - kobber - loddet tilkobling d: 22 (kvalitetsmerke for d12-54)

T-stykke i bronse med loddingstilkobling, Rp-gjenge d1: 28, Rp: 12, d2: 28

Kobling - kobber - loddet tilkobling d: 28 (kvalitetsmerke for d12-54)

Adapter - gunmetal - loddet tilkobling, Rp-gjenge d: 15, Rp: 34

Viega 95243

Adapter - gunmetal - loddet tilkobling, R-gjenge: 18, R: 12

Viega 94270G

Viega 94270G

Redusere kobling - kobber - loddet tilkobling d1: 15, d2: 12 (kvalitetssegl for d12-54)

T-stykke - kobber - loddeforbindelse d1: 10, d2: 10, d3: 10

T-stykke - kobber - loddeforbindelse d1: 12, d2: 12, d3: 12 (kvalitetsmerke for d12-54)

Redusere kobling - kobber - loddet tilkobling d1: 18, d2: 15 (kvalitetsmerke for d12-54)

Press connector system with press connectors made of copper and gunmetal tested in acc. with DVGW worksheet W 534 with DVGW test seal and pipes made of copper in acc. with EN 1057 in acc. with DVGW worksheet GW 392.Suitable for drinking water installations in acc. with DIN 1988.For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber), up to 110 °C

Press connector system with press connectors made of copper and gunmetal tested in acc. with DVGW worksheet W 534 with DVGW test seal and pipes made of copper in acc. with EN 1057 in acc. with DVGW worksheet GW 392.Suitable for drinking water installations in acc. with DIN 1988.For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber), up to 110 °C

Viega 2416.1

Viega 2416.1

Viega 2416.1

Viega 95301

Viega 2426

Viega 2415

Viega 95301

Press fitting system with copper and redware press fittings, approved according to DVGW worksheet W 534 with DVGW approval and copper pipes according to DIN EN 1057, according to DVGW worksheet W 392.
Suitable for drinking water installations according to DIN 1988.
For dimensionally stable surface-mounted and built-in installations of distribution and riser cables in Viega's complete system.