Viega 2212

Viega 2212

Viega 2212

Sanpress Adapter with SC-Contur- gunmetal or silicium bronze- press connection, Rp-threadComponentsEPDM sealing element, polygon, VdS certification d: 42, Rp: 112

Viega 2211

Viega 2211

Long nipple- gunmetal- R-thread

Viega 94340G

Viega 5318

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Viega 1116XL

Viega 1115.1

Sanpress Inox T-piece with SC-Contur- steel non-corroding- press connectors, Rp-threadComponentsEPDM sealing elements, polygond1: 18, Rp: 34, d2: 18

Megapress adapter with sc 35 x 114 for f

Megapress Adapter with SC-Contur for drinking water installation- steel pipes in accordance with DIN EN 10220/10255 with galvanizing in accordance with DIN EN 10240- gunmetal or silicium bronze- press connectorsComponentsEPDM sealing element, cutting ring, separator ringDN: 25, D: 1, d: 28

Sanpress Inox Adapter with SC-Contur- steel non-corroding- press connection, Rp-threadComponentsEPDM sealing element, polygon, VdS certificationd: 54, Rp: 2

Megapress-adapter med SC-Contur for drikkevannsinstallasjon - stålrør i samsvar med DIN EN 10220/10255 med galvanisering i samsvar med DIN EN 10240 - bronse eller silisiumbronse - trykkontakterKomponenterEPDM tetningselement, skjæring ring, separatorringDN: 15, D: 12, d: 15

Smartloop tilkoblingssett - for varmtvanns stigerør med intern sirkulasjonsrør, varmtvanns stigerør fra d28, sirkulasjonsrør d15 - egnet for Smartloop Pipe PB 2007.3- messing eller silisiumbronseKomponenterPlug, tilkoblingskontaktd1: 28/35, d2: 12

Viega 2318

Forlengelse- gunmetal- R-gjenge, Rp-gjenge

Profipress Cap with SC-Contur- copper - press connection Components EPDM sealing elements.

Viega 1116XL

Viega 1115XL

Sanpress Inox Connection screw fitting with SC-Contur- steel non-corroding- press connection, G-thread- flat sealingComponentsEPDM sealing element, EPDM flat seal, union nut screw fitting, VdS certificationd: 22, G: 34

Lang brystvorte i gunmetal med R-gjenge. R: 1, L: 110 mm