Viega - side 22

Forlengelse- gunmetal- R-gjenge, Rp-gjenge

Smartloop tilkoblingssett - for varmtvanns stigerør med intern sirkulasjonsrør, varmtvanns stigerør fra d28, sirkulasjonsrør d15 - egnet for Smartloop Pipe PB 2007.3- messing eller silisiumbronseKomponenterPlug, tilkoblingskontaktd1: 28/35, d2: 12

Raxofix T-piece with SC-Contur- silicium bronze- press connectors, Rp-threadd1: 20, Rp: 12, d2: 20

Raxofix Adapter with SC-Contur- silicium bronze- press connection, Rp-threadd: 32, Rp: 1

Viega 2611

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Viega 2315XL

Viega 2326

Viega 2318

Viega 2326

Viega 2275.1

Viega 2316

Viega 2316.1

Easytop Ball valve with SC-Contur- press connection, Rp-threadsComponents Valve casing in gunmetal or silicium bronze according to DIN 50930-6 / DIN EN 1982, maintenance-free selector shaft, stainless steel ball, actuation lever T-form with medium marking green/red exchangeable, EPDM sealing element.Technical dataoperating pressure max. 1.6 MPa (PN 16)operating temperature max. 110 °C with DVGW-test markDN: 25, d: 28, Rp: 1

Sanpress Plug-in piece- gunmetal or silicium bronze- plug-in end, R-threadComponentsPolygon d: 22, R: 34

Viega 2316

Sanpress Adapter with SC-Contur- gunmetal or silicium bronze- press connection, Rp-threadComponentsEPDM sealing element, polygon, VdS certification d: 35, Rp: 114

Viega 1117.2

Prestabo T-piece with SC-Contur- galvanised non-alloyed steel- press connectorsComponentsEPDM sealing elementsd1: 22, d2: 18, d3: 22

Viega 1115

Press connector system with press connectors made of gunmetal, pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DINEN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene

Viega 1112

Viega 1112

Viega 1115.1XL

Viega 1112