Viega 95002A

Viega 2612

Albue 90° - kobber - loddet tilkobling, plugg-inn ende: 12 (kvalitetssegl for d12-54)

Viega 95001A

Sanpress Inox Adapter with SC-Contur- steel non-corroding- press connection, R-thread Components EPDM sealing element, polygond: 18, R: 34

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Sanpress Inox Adapter with SC-Contur- steel non-corroding- press connection, R-thread ComponentsEPDM sealing element, polygon, VdS certificationd: 54, R: 2

Viega 2315

Fittings with threads in acc. with DINEN 10226, Part 1, certified for drinking water in acc. with DIN 1988 and gas installations in acc. with TRGI 2008 (observe notes on the model), tested in acc. with DVGW worksheet GW 6 and GW 393.CertificatesGunmetal threaded fittings – DVGW-Reg.-No. DV-7401AO2957Threaded connectionsR-external thread, produced on site – hempen without roughening of the thread is possible.

Reduser- gunmetal- R-gjenge, Rp-gjenge- rundR: 1, Rp: 114

T-stykke- messing- Rp-gjengeRp1: 14, Rp2: 14, Rp3: 14

T-piece- gunmetal- Rp-thread

Fittings with threads in acc. with DINEN 10226, Part 1, certified for drinking water in acc. with DIN 1988 and gas installations in acc. with TRGI 2008 (observe notes on the model), tested in acc. with DVGW worksheet GW 6 and GW 393.CertificatesGunmetal threaded fittings – DVGW-Reg.-No. DV-7401AO2957Threaded connectionsR-external thread, produced on site – hempen without roughening of the thread is possible.

Reduser- gunmetal- R-gjenge, Rp-gjengeKomponenterPolygonR: 2, Rp: 112

Viega 3240

Viega 3241

Viega 3121

Viega 3092

Viega 3090

Viega 3090

Viega 3092

Viega 3092

Viega 3240

Viega 3092

Viega 3090