Verktøy for rørleggerarbeid - side 3

Specially hardened cutter wheel in approved, tough-hard REMS die-steel quality ensures a long service life.REMS cutter wheel Cu-INOX 3 – 120, s 4Copper tubes, stainless steel tube

Robust quality tool for neat, fast cutting of pipes. With integrated pipe scissors for corrugated pipes. Stable execution of magnesium. For one-handed operation.
P plastic pipe, plastic pipe with metallic insert ≤ Ø 26 mm, ≤ Ø 1"
SW plastic corrugated pipe Ø 18 – 35 mm, Ø 3/4 – 1 3/8"

REMS ROS P 26/SW 35 – Fast cutting with one cut up to Ø 26 mm. With integrated pipe cutter for plastic corrugated pipe up to Ø 35 mm.

Reamer en223 6-36 mm inner/outer reaming

Ridgid tube bender 315m

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

KNIPEX 97 61 145 A Presstang for endehylser overtrukket med kunststoff 145 mm

Robust quality tools for cutting tubes. Particularly suited for cutting stainless steel tubes.Copper tubes, thin-walled stainless steel tubes, thin-walled steel, aluminium, brass tubes Ø 6 – 35 mm Ø 18 – 138Cutting wheel:4327920515REMS RAS Cu-INOX – the compact version with telescopic spindle.

KNIPEX 97 21 215 C Presstang med flerkomponent-grep svart lakkert 230 mm

Hand pressure test pump with manometer, p = 60 bar/6 MPa/870 psi, for pressure and tightness testing of pipe systems and containers up to 60 bar/6 MPa/870 psi. Corrosion-resistant, powder-coated steel container for 12 l volume. 1.5 m high-pressure hose with 12" connection. In carton.

Powerful, electric pressure testing pump for pressure and tightness tests of piping systems and receptacles. Testing and pressure range p 60 bar/6 MPa/870 psi. Pumping capacity 6.5 l/min water, hydrous solutions, emulsions, ph-value of liquids 7-10, temperature of liquids 60°C, viscosity of liquids 1.5 mPa s.REMS E-Push 2 – electric charging and testing. Up to 60 bar. With adjustable pressure limiting. 1300 W. Self sucking.

Cutter, 103 tubing

Cutter, 152 tubing

REMS Swing set. One-handed pipe bender Ø 10–32 mm, Ø 3/8"-7/8", up to 90°. Soft copper tubes Ø 10–22 mm, Ø 3/8–7/8", s=1mm, soft plastic coated copper tubes Ø 10–18 mm, Ø 3/8"–5/8", s = 1mm, plastic coated C-steel pipe for press fitting system Ø 12–18 mm, mild precision steel pipe Ø 10–18 mm, s=1mm, plastic pipe with metallic insert Ø 14–32 mm. Up to Ø 26 mm with bends, bend segments, universal stop with sliding pieces, in stable steel case/ case. Up to Ø 32 mm with bends, bend segments, 2 stops with sliding pieces, in stable case.

KNIPEX 87 05 250 Cobra® Hightech-vannpumpetang med slanke flerkomponent-grep forkrommet 250 mm

412m ridgid bender 12 mm

KNIPEX 90 10 185 Rørkutter for flerlags- og pneumatikkslanger av seigt, glassfiberforsterket kunststoff 185 mm

High compression pressing tongs/pressing rings in forged and specially hardened steel. Pressing contours of REMS pressing tongs/pressing rings are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC & REMS Mini-Press 22V ACC drive units. Read and follow the installation and assembly instructions of the system provider/manufacturer.

Universal, handy electric tool with automatic circuit control for producing pipe pressing joints for all common pressfitting systems. For battery and corded operation. Pressing joints Ø 10–108 mm / 3/8 - 4. Complete range of REMS pressing tongs/pressing rings for all common pressfitting systems.REMS Akku-Press ACC Li-Ion – universal up to Ø 108 mm / 4.With automatic circuit control and electronic service control. Secure crimping in seconds. Automatic locking of pressing tongs

RØRKLIPPER 35 DURAMAG (Cu, messing, Al, tynne veggrør)

REMS cutter wheel Cu-INOX for stainless steel pipes of pressfitting systems, copper, carbon steel

Cutter, 150ls tubing hd

Desolderingspumpe HQ
plasthus med antistatisk teflonspiss

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.

Desolderingspumpe HQ
lett metallhus med antistatisk Teflon-spiss

Avgradning for kobber- og plastslanger, formet som en blyant, og er derfor lett å bære i lommen