Trykkrør & Beslag - side 13

XPress Stainless axial compensator FF 35

XPress Stainless axial compensator FF 22

XPress Stainless straight connector FF 15XRp1/2

XPress Stainless elbow 90 deg. FF 35

XPress Stainless elbow 45 deg. FØ 22

XPress Carbon elbow 90 deg. FØ 35

XPress Stainless straight connector FF 35XRp1

XPress Stainless elbow 45 deg. FØ 28

XPress Carbon elbow 90 deg. FM 15XR1/2

Viega 1118

XPress Stainless straight connector FF 28XRp1

XPress Stainless straight connector FF 28XRp3/4

XPress Stainless straight connector FM 28XR5/4

XPress Stainless angle adapter 90 deg. FM 28XR1

For cold and hot potable water, For heating water, For cooling water without antifreeze agent, For cooling water with antifreeze agent, For remote network heating water 120 °C, For saturated steam 120 °C, For service water, For ultrapure water (except pharmaceutical water), For rainwater with a pH value of > 6.0, For grey and black water with pH value > 6.0, For extinguishing water (wet), For sprinklers (wet), For chemicals and technical liquids, For compressed air (oil purity class 0–3), For negative pressure, For inert gases (e.g. nitrogen), For industrial gases (e.g. acetylene, shielding gases), For technical building systems, industry and shipbuilding, Application overview: Geberit Mapress Stainless Steel for liquid media, Application overview: Geberit Mapress Stainless Steel for gaseous media.

XPress Stainless elbow 90 deg. FF 42

XPress Carbon elbow 90 deg. FM 35XR5/4

XPress Stainless elbow 45 deg. FØ 88.9

XPress Stainless elbow 90 deg. FØ 28

Viega 2315

Press connector system with press connectors made of copper and gunmetal tested in acc. with DVGW worksheet W 534 with DVGW test seal and pipes made of copper in acc. with EN 1057 in acc. with DVGW worksheet GW 392.Suitable for drinking water installations in acc. with DIN 1988.For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber), up to 110 °C

Viega 2416.1

Presskontaktsystem med presskontakter laget av kobber og gunmetal testet iht. DVGW regneark W 534 med DVGW testforsegling og rør av kobber iht. EN 1057 iht. DVGW-regneark GW 392.
Passer til drikkevannsinstallasjoner iht. DIN 1988. For dimensjonsstabile skjulte og forhåndsinstallasjoner i vegg av manifold og stigerør i Viega komponentmontering. Alle størrelser med SC-Contur-tilkoblinger som forblir upresset blir synlige når systemet fylles. SC-Contur er sertifisert og oppfyller kravene i DVGW-regnearket W 534, punkt 12.14, kontakter med tvungen lekkasje. Under lekkasjetester med vann, garanterer Viega identifisering av upressede tilkoblinger i trykkområdet 0,1 MPa – 0,65 MPa, i etuiet av en tørrlekkasje-test med trykkluft eller edelgasser fra 22 hPa – 0,3 MPa. Merking: Grønn prikk på presseforbindelsen. Tetningselementer EPDM, svart (etylen-propylen-dien-monomergummi), opptil 110° C.

Viega 2416.1

Viega 2426