Trykkrør & Beslag

Viega Sanpress XL bend 90° 76.1 gunmetal/glossy 353650

2 123,00 kr (1 698,40 kr)

Fjernlager, 3-5 dager til forsendelse

Viega Sanpress bend 90° 42 gunmetal/glossy 130497

Press connector system with press connectors made of gunmetal, pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DINEN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene

639,00 kr (511,20 kr)

Fjernlager, 2-4 dager til forsendelse

Viega Sanpress transition bend 90° 15 x 1/2" gunmetal

Viega 2214

190,00 kr (152,00 kr)

Fjernlager, 2-4 dager til forsendelse

Viega Sanpress transition bend 90° 18 x 1/2" gunmetal

Viega 2214

303,00 kr (242,40 kr)

Fjernlager, 3-5 dager til forsendelse

Viega Prestabo T-piece 35 x 3/4" x 35 mm galvanized steel

Viega 1117.2

188,00 kr (150,40 kr)

Fjernlager, 2-4 dager til forsendelse

Viega Prestabo T-piece 42 x 1/2" x 42 mm galvanized steel

Viega 1117.2

265,00 kr (212,00 kr)

Fjernlager, 2-4 dager til forsendelse

Viega Sanpress T-piece 22 x 15 x 22 mm gunmetal

Sanpress T-stykke med SC-Contur- gunmetal eller silisiumbronse- presskoblinger. Komponenter inkluderer EPDM-tetningselementer. d1: 22, d2: 15, d3: 22

220,00 kr (176,00 kr)

Fjernlager, 2-4 dager til forsendelse

Viega Sanpress bend 90° 22 gunmetal/glossy 108120

Viega Sanpress bøye 90° 22 Rød messing/blank, 108120

189,00 kr (151,20 kr)

Fjernlager, 2-4 dager til forsendelse

Viega Sanpress bend 45° 15 gunmetal/glossy 109332

Press connector system with press connectors made of gunmetal, pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DINEN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene

161,00 kr (128,80 kr)

Fjernlager, 2-4 dager til forsendelse

Viega Sanpress reduction 22 x 18 mm gunmetal

Viega 2215.1

144,00 kr (115,20 kr)

Fjernlager, 2-4 dager til forsendelse

Viega Sanpress bend 45° 22 gunmetal/glossy 110949

Press connector system with press connectors made of gunmetal, pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DINEN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene

219,00 kr (175,20 kr)

Fjernlager, 2-4 dager til forsendelse

Viega Sanpress T-piece 22 mm gunmetal

Sanpress T-piece with SC-Contur- gunmetal or silicium bronze- press connectorsComponentsEPDM sealing elements d1: 22, d2: 22, d3: 22

244,00 kr (195,20 kr)

Fjernlager, 2-4 dager til forsendelse

Viega Sanpress bend 45° 42 gunmetal/glossy 128531

Press connector system with press connectors made of gunmetal, pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DINEN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene

651,00 kr (520,80 kr)

Fjernlager, 2-4 dager til forsendelse

Viega Sanpress reduction 28 x 15 mm gunmetal

Viega 2215.1

154,00 kr (123,20 kr)

Fjernlager, 2-4 dager til forsendelse

Viega Sanpress T-piece 28 x 1/2" x 28 mm gunmetal

Viega 2217.2

309,00 kr (247,20 kr)

Fjernlager, 2-4 dager til forsendelse

Viega Sanpress XL bend 45° 88.9 gunmetal/glossy 351359

Viega 2226XL

2 720,00 kr (2 176,00 kr)

Fjernlager, 2-4 dager til forsendelse

Viega Bending stainless nipple/nipple 15 mm

Overbøying Viega rustfritt stålnippel/nippel 15 mm.

141,00 kr (112,80 kr)

Fjernlager, 2-4 dager til forsendelse

Viega Sanpress XL T-piece 76.1 mm gunmetal

Viega 2218XL

3 308,00 kr (2 646,40 kr)

Fjernlager, 3-5 dager til forsendelse

Viega Sanpress bend 90° 42 gunmetal/glossy 119560

Press connector system with press connectors made of gunmetal, pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DINEN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene

610,00 kr (488,00 kr)

Fjernlager, 2-4 dager til forsendelse

Viega Sanpress reduction 35 x 22 mm gunmetal

Sanpress Reducer with SC-Contur- gunmetal or silicium bronze- plug-in end, press connectionComponentsEPDM sealing elementd1: 35, d2: 22

175,00 kr (140,00 kr)

Fjernlager, 2-4 dager til forsendelse

Viega Sanpress reduction 35 x 28 mm gunmetal

Sanpress Reducer with SC-Contur- gunmetal or silicium bronze- plug-in end, press connectionComponentsEPDM sealing elementd1: 35, d2: 28

188,00 kr (150,40 kr)

Fjernlager, 2-4 dager til forsendelse

Viega Sanpress reduction 42 x 28 mm gunmetal

Sanpress Reducer with SC-Contur- gunmetal or silicium bronze- plug-in end, press connectionComponentsEPDM sealing elementd1: 42, d2: 28

262,00 kr (209,60 kr)

Fjernlager, 2-4 dager til forsendelse

Viega Sanpress transition 22 x 1" sleeve/nipple gunmetal

Viega 2211

110,00 kr (88,00 kr)

Fjernlager, 2-4 dager til forsendelse

Viega Sanpress reduction 54 x 35 mm gunmetal

Viega 2215.1

331,00 kr (264,80 kr)

Fjernlager, 2-4 dager til forsendelse

Viega Sanpress transition 28 x 1" sleeve/nipple gunmetal

Viega 2211

136,00 kr (108,80 kr)

Fjernlager, 2-4 dager til forsendelse

Mandag - Torsdag:	9.00 - 15.00
Fredag - Søndag:	Stengt

Telefon: +47 35060606	+47 35060606
E-post privatkunder:	[email protected]
E-post bedriftskunder:	[email protected]

Trykkrør & Beslag - side 11

Viega Sanpress XL bend 90° 76.1 gunmetal/glossy 353650

Viega Sanpress bend 90° 42 gunmetal/glossy 130497

Viega Sanpress transition bend 90° 15 x 1/2" gunmetal

Viega Sanpress transition bend 90° 18 x 1/2" gunmetal

Viega Prestabo T-piece 35 x 3/4" x 35 mm galvanized steel

Viega Prestabo T-piece 42 x 1/2" x 42 mm galvanized steel

Viega Sanpress T-piece 22 x 15 x 22 mm gunmetal

Viega Sanpress bend 90° 22 gunmetal/glossy 108120

Viega Sanpress bend 45° 15 gunmetal/glossy 109332

Viega Sanpress reduction 22 x 18 mm gunmetal

Viega Sanpress bend 45° 22 gunmetal/glossy 110949

Viega Sanpress T-piece 22 mm gunmetal

Viega Sanpress bend 45° 42 gunmetal/glossy 128531

Viega Sanpress reduction 28 x 15 mm gunmetal

Viega Sanpress T-piece 28 x 1/2" x 28 mm gunmetal

Viega Sanpress XL bend 45° 88.9 gunmetal/glossy 351359

Viega Bending stainless nipple/nipple 15 mm

Viega Sanpress XL T-piece 76.1 mm gunmetal

Viega Sanpress bend 90° 42 gunmetal/glossy 119560

Viega Sanpress reduction 35 x 22 mm gunmetal

Viega Sanpress reduction 35 x 28 mm gunmetal

Viega Sanpress reduction 42 x 28 mm gunmetal

Viega Sanpress transition 22 x 1" sleeve/nipple gunmetal

Viega Sanpress reduction 54 x 35 mm gunmetal

Viega Sanpress transition 28 x 1" sleeve/nipple gunmetal