Trykkrør & Beslag - side 12

XPress Carbon reducer FØ 18X22

XPress Carbon reduced T-piece FFF 18X15X18

T-piece cst d54-22-54 zn-pl

Press connector system with press connectors made of copper and gunmetal tested in acc. with DVGW worksheet W 534 with DVGW test seal and pipes made of copper in acc. with EN 1057 in acc. with DVGW worksheet GW 392.Suitable for drinking water installations in acc. with DIN 1988.For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber), up to 110 °C

Viega 2218

T-piece ft cst d35-rp1/2-35 zn-pl

ProduktinformasjonArtikkel XPress Copper T-stykke FFF 22 Artikkelnummer (GTIN) 047220022 (05022050014375) Enkeltstykke GTIN 05022050384607 Del av artikkelgruppe S24 - XPress Copper T-stykke Størrelse 22 Varevekt 0,13 kg l x b x h 74x53x31 Emballasje (10 Bag) EgenskaperFarger Kobber Materialer Kobber (CW024A) Produsent Pegler Yorkshire Form T-stykke Tilslutningstype Trykk (M) Tetting EPDM

Viega 2616.1

XPress Stainless straight connector FM 28XR5/4

Viega 1115.1

Wavin Tigris K5 pressfittings er designet og utviklet for enkel installasjon, optimalisert gjennomstrømningsytelse med pressede skjøter.

Sanpress T-stykke med SC-Contur- gunmetal eller silisiumbronse- presskoblinger. Komponenter: EPDM tetningselementer d1: 35, d2: 35, d3: 35

XPress Stainless elbow 45 deg. FF 35

Geberit Mapress Rustfrit

- Til sanitære anlæg og industri
- Til varmeanlæg, køl og industri 
- Garanteret utæt før presning
- Med presseindikator

Egnede press bakk......

XPress Carbon elbow 45 deg. FF 54

XPress Stainless reducer FØ 28X54

Press connector system with press connectors made of gunmetal, pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DINEN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene

XPress Stainless T-piece FFF 15

XPress Carbon elbow 90 deg. FF 28XRp3/4

XPress Stainless reducer FØ 18X35

Geberit 33738 vannslange kopling Slangekontakt Rustfritt stål 1 stykker

XPress Carbon angle adapter 90 deg. FM 22XR3/4

XPress Carbon+stainless O-ring viton 88.9

Viega 1117.2

Viega 1115.1