Wera Verktøy - side 2

Wera 05003990001 manuell skrutrekker Enkel Presisjonsskrutrekker

Tire jack set, 2 deler, 1/4"

Wera 800/1 BTZ skrutrekker bits 1 stykker

Ratcheting screwdriver with bit and socket set, 28 deler

Ratcheting screwdriver with bit and socket set, 42 deler

The Wera Mini ratchet. Simple operation, even with just one hand, in confined working spaces. Drop-forged, full-steel design and fine-pitched mechanism with 60 teeth that allows a small return angle of 6° for precise working. 1 x 1/4"x87.0

Zyklop ratchet with 1/4"drive. The 72 fine-pitched teeth ensure a low return angle of only 5°. The ratchet head pivots freely and can be locked into any position by using the slide switch that is positioned on either side. It is even possible to work conveniently in very confined and difficult-to-access areas with enhanced hand clearance. The predefined locking positions at 0°, 15° und 90°, both to the right and left, ensure safe working without any slipping of the ratchet head. The ratchet can be used as a conventional screwdriver in the 0° position by attaching an adaptor and a bit. The flywheel design ensures rapid screwdriving. The rotation-symmetric construction of the Kraftform handle and the free-turning sleeve support rapid twisting. The outstanding design of the Kraftform handle fits perfectly into the hand preventing hand injuries such as blisters and calluses. The hard materials used for the handle ensure quick and easy hand repositioning without any danger of the skin "sticking" to the handle. The softer anti-slip zones enable the low-loss transfer of high torque. For 1/4" square sockets as well as 1/4" adaptors with square drive, equipped with ball lock.

Wera 05134019001 spennings test skrutrekker Svart, Gult

Wera 8740 A HF 1 Stikkontakt

Guitar tool set, 27 deler

Wera 7441 Enkel

Pipenøkkelsett, 9 deler, 1/4", inn belt holder

Ratcheting screwdriver with bit and socket set, 27 deler, inn foldable box

Bit-Check that can be positioned upright with high quality bits out of stainless steel. Wera stainless tools are manufactured out of stainless steel, thus preventing the formation of unsightly extraneous rust. 9 Wera stainless bits. 1 stainless Rapidaptor quick-release holder. The multi-component Bit-Check is convincing on account of its low weight and the maximum possible degree of compactness. In this respect, the soft material in the lower section of the Bit-Check ensures that the bits are securely held whilst being simple to remove at the same time. The profile and size of the bits are easy to recognise thanks to the Wera "Take it easy" Tool Finder with its colour coding and clearly visible imprint.

Wera 05003645001 pipenøkkel Pipenøkkelsett 37 stykker

Ratcheting torque wrench with bit and socket set, 28 deler

High quality set of ratcheting combination wrenches by Wera: Joker ratcheting combination wrenches with angled ratchet head and switch lever.

Sizes: 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19

Klikk-momentskrutrekker i det uforvekslelige, robuste Wera-designet med høy nøyaktighet i henhold til DIN EN ISO 6789-1: 2017-07. Enkel innstilling og lagring av standardverdien. De hørbare og taktile klikkene når skalaen nås, letter også den sikre innstillingen av ønsket dreiemomentverdi. Det robuste frigjøringsmekanismen garanterer et tydelig hørbart og taktilt frigjøringssignal når det angitte dreiemomentet er nådd. For bruk med høyrehånd (med klokken) momentkontroll og med en reversibel ratchetmekanisme på 45 tenner.

Wera 05020231001 kombinasjonsnøkkel

Wera 8100 SA All-in Pipenøkkelsett 42 stykker

43-piece Zyklop set in robust metal case: Zyklop ratchet with 3/8"drive. The 72 fine-pitched teeth enable a low return angle of only 5°. The ratchet head pivots freely and can be locked into any position by using the slide switch that is positioned on either side. It is even possible to work conveniently in very confined and difficult-to-access areas with enhanced hand clearance. The predefined locking positions at 0°, 15° und 90°, both to the right and left, ensure safe working without any slipping of the ratchet head. The ratchet can be used as a conventional screwdriver in the 0° position by attaching an adaptor and a bit. The flywheel design ensures rapid screwdriving. The rotation-symmetric construction of the Kraftform handle and the free-turning sleeve support rapid twisting. The outstanding design of the Kraftform handle fits perfectly into the hand preventing hand injuries such as blisters and calluses. The hard materials used for the handle ensure quick and easy hand repositioning without any danger of the skin "sticking" to the handle. The softer anti-slip zones enable the low-loss transfer of high torque. For 3/8" square sockets as well as 3/8" adaptors with square drive, equipped with ball lock. Including 18 Zyklop sockets, 2 Zyklop extensions with free-turning sleeve, 1 T-handle, 1 wobble extension, 1 universal joint, 1 adaptor with quick-release chuck, 18 bits. "Take it easy" Tool Finder with colour coding according to sizes.

Serie 300 XXL 2, Skrutrekkersett

Utrolig kompakt settarrangement med mange verktøy på et minimum av plass. En helt ny ratchet-sett-følelse takket være de unike tekstilboksene som er veldig robuste og holdbare. De kan plasseres oppreist for ryddig lagring på verkstedhyllen. Ekstra overflatebeskyttelse på grunn av tekstil yttermateriale. Lav vekt og volum for enklere mobilitet. "Take it easy" Tool Finder med fargekoding etter størrelser.

Wera 8004 C Pipenøkkel 1 stykker

Wera 05003535001 nøkkelsett (verktøy) Støpselsett