Wera Verktøy - side 9

Interchangeable blade with reduced shaft diameter and integrated insulation protection; this means that low-lying screws and spring elements can be accessed and actuated. Individually tested tools as per IEC 60900. Individual test in water bath at 10,000 volts for secure work at the permissible voltage of 1,000 volts. The Wera Black Point tip offers a perfect fit and optimised corrosion protection.

Premium bits med tverrsnittssone der kinetisk energi blir absorbert under toppbelastninger. Dette øker produktets levetid betydelig. Tøft, for universell bruk. 1/4" sekskantet, egnet for holdere i henhold til DIN ISO 1173-D 6.3.

Høykvalitets bits, optimalisert for asiatiske PH-skruer. Spesielt egnet for applikasjoner med svært små dimensjoner i henhold til den japanske kameraindustristandarden. Tøff og viskøs for universell bruk. ¼” sekskant, egnet for holdere i henhold til DIN ISO 1173-F 6.3.

Serie 300 335, Stubbe/forgasser-skrutrekker, 24.5 mm

Typisk Wera designet robust tekstilbelte med 9 uttak som tar opp minimal plass. En jevn dreie Twist to Unlock-mekanisme sikrer en sikker passform og enkel fjerning av uttakene. Leveres med "Take it easy" Tool Finder med fargekoding etter størrelse for å gjøre det enkelt og raskt å velge riktig verktøy. Inkluderer en snap-krok for sikker festing til beltehempe eller lomme. Leveres med et nonwoven revers side og krok-og-løkke-striper for enkel vedlegg f.eks til vegg, hylle, verktøyvogn og til Wera 2go-verktøytransportsystemet.

6 50 mm-long Wera bits tidily arranged in a minimum of space in a practical Bit-Check. The tough viscous bits are suitable for universal use. In the case of the Torsion bits (TZ), torque peaks are additionally absorbed in the Torsion zone. This prevents premature wear and enhances the service life.

VDE-blad for Kraftform Kompakt VDE-håndtak/utskiftbart blad-system for rask utveksling av bladet uten behov for spesielle verktøy. Individuelt testede verktøy i henhold til IEC 60900. Individuell test i vannbad ved 10 000 volt for sikker arbeid ved tillatt spenning på 1 000 volt. Wera Black Point-spissen gir en perfekt passform og optimalisert korrosjonsbeskyttelse.

Tough viscous Wera bits for hexagon socket screws for universal use. The Hex-Plus profile offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. ¼” hexagon, suitable for holders as per DIN ISO 1173-F 6.3.

Especially small bit-holding Stubby screwdriver handle with short blade for hard to reach areas. Suitable for the mounting of bits with ¼"
hexagon drive as per DIN ISO 1173-C 6.3 and Wera connection series 1.With strong permanent magnet, which also holds large and
heavy screws. The 2-component Kraftform handle with its practical combination of hard and soft zones allows for a firm grip and precise
working. The hexagon anti-roll protection prevents annoying rolling away of bits in the workplace.

Ikke-magnetisk design. ¼" sekskant, egnet for holdere i henhold til DIN ISO 1173-F 6.3.

Muttertrekker for sekskant hodeskruer
1/4" sekskantdrift
Ikke-magnetisk design
Metrisk

High quality Wera Micro screwdriver for precision mechanical jobs. Rapid twisting results from fixing the hand on the head and using the fast-turning zone just below. This makes time-consuming grip adjustments unnecessary. Power zones with integrated soft sections ensure the transfer of high loosening and tightening torque; a precision zone for the right rotation angle during fine adjustment work. The Black Point tip offers optimised corrosion protection and an exact fit.

Høykvalitets biter av rustfritt stål for spaltehoder. Wera Stainless er laget av rustfritt stål som hindrer dannelse av stygge ekstranøse rust. ¼" sekskant, egnet for holdere i henhold til DIN ISO 1173-F 6.3.

High quality Wera Micro screwdriver for precision mechanical jobs. Rapid twisting results from fixing the hand on the head and using the fast-turning zone just below. This makes time-consuming grip adjustments unnecessary. Power zones with integrated soft sections ensure the transfer of high loosening and tightening torque; a precision zone for the right rotation angle during fine adjustment work. The Black Point tip offers optimised corrosion protection and an exact fit.

High quality Wera Micro screwdriver for precision mechanical jobs. Rapid twisting results from fixing the hand on the head and using the fast-turning zone just below. This makes time-consuming grip adjustments unnecessary. Power zones with integrated soft sections ensure the transfer of high loosening and tightening torque; a precision zone for the right rotation angle during fine adjustment work. The Black Point tip offers optimised corrosion protection and an exact fit.

High quality Wera Micro nutsetter set for precision mechanical work. Comes with practical holding function: the wedging forces resulting from the contact pressure between the drive tip and the screw profile securely hold the screw on the tool. Rapid twisting is possible by fixing the hand on the twist cap and using the fast-turning zone just below it. This makes time-consuming grip adjustments unnecessary. Power zone with integrated soft zones ensure the transfer of higher tightening and loosening torque. Precision zone for the right angle for adjustment work. The Wera Black Point tip offers high corrosion protection and an exact fit.

Tough viscous Wera bits for hexagon socket screws for universal use. The Hex-Plus profile offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. ¼” hexagon, suitable for holders as per DIN ISO 1173-F 6.3.

Universell holder for opptak av bits med ¼” sekskantet hodedrift i henhold til DIN ISO 1173-C 6.3. Rustfritt stålsleeve for svært spesiell korrosjonsbeskyttelse. Festeringen sikrer en optimal passform av verktøyet i holderen. Den sterke permanente magneten holder bitene helt sikkert på plass. ¼” sekskantet, egnet for kraftskrutrekkere med opptak i henhold til DIN ISO 1173-F 6,3.

High quality bits out of stainless steel for recessed TORX® screws. Wera stainless are made out of stainless steel which prevents the formation of unsightly extraneous rust. ¼” hexagon, suitable for holders as per DIN ISO 1173-F 6.3.

Universal holder for the take-up of bits with ¼” hex head drive as per DIN ISO 1173-C 6.3. Stainless sleeve for special corrosion protection. The particularly strong retaining ring ensures an optimum fixing of the tool in the holder. The especially strong permanent magnet makes sure that the bits are held absolutely securely. ¼” hexagon, suitable for holders as per DIN ISO 1173-F 6.3.

High quality Wera Micro screwdriver for precision mechanical jobs. Rapid twisting results from fixing the hand on the head and using the fast-turning zone just below. This makes time-consuming grip adjustments unnecessary. Power zones with integrated soft sections ensure the transfer of high loosening and tightening torque; a precision zone for the right rotation angle during fine adjustment work. The Black Point tip offers optimised corrosion protection and an exact fit.

Wera 05050210001 skruetrekker bit-holder 25,4 / 4 mm (1 / 4") 1 stykker

Wera 8790 HMC HF Zyklop drillbit 1 stykker

High quality bits with Torsion zone – where kinetic energy is diverted from peak loads. This greatly extends the product service life. Tough viscous, for universal use. ¼” hexagon, suitable for holders as per DIN ISO 1173-F 6.3.

Wera 05053457001 skruetrekker bit-holder Rustfritt stål 25,4 / 4 mm (1 / 4") 1 stykker

Wera 05056330001 skrutrekker bits 1 stykker