Duka Ventilation - side 4

For installation in Duka's white plastic ventilation pipes in connection with fans mounted in the wall, when you want to avoid drafts when the fan is switched off.

Duka fan Pro 30TH Humidity and time controlled, Ø100 mm, white

Louvers for air intake and return. With flange and with fly net. Cast in aluminium.

Kanalvifte for innbygging på loftet direkte i ventilasjonskanalen. Diameter: 100mm

TT silent kanalvifte er ekstra lydisolert, noe som gir stillegående drift. Kanalviftene kan brukes sammen med Ø100 mm ventilasjonsrør.

Used when the fan S7 does not cover the duct opening. With rubber seal on the back and 4 screws for installation.

Duka Mounting sleeve 10-15 cm Type 212

Flex hose with insulation Ø127x4000 mm, white

Lamellar valve type 70 attached transition piece Ø100 mm. Valve with loose slats that opens for internal air flow, but minimizes wind nuisance from the outside. Used in connection with fans, hoods and dryers.

With a telescopic valve, you get a complete solution for ventilation in your home. A complete telescopic valve with sound-insulated wall feed-through, insect net, external gray, red or white louvre grille, internal white wall valve with cord pull, dust filter and condensation-insulated lid. Used for wall thicknesses from 260-400 mm. Can be extended with a 20 cm. extension tube. Sound attenuation in the closed position is 45 dB and in the fully open position is 26 dB. Note during installation: It is best to install telescopic valves in the outer walls - approx. 100 mm from ceiling. There should be two valves per room, depending on the size of the room. The valves must always be placed opposite each other so that the air circulation proceeds effortlessly. If possible, the valves should be placed on the west and east sides of the house, since the wind in Denmark mainly comes from the west.

Komplett teleskopventil med lydisolert mur gjennomføring, insektnett, utvendig grå jalusirist, innvendig hvit veggventil med snortrekk, støvfilter og kondensisolert lokk. Diameter: 102mm

Ved bruk av rørstussen sikres en tett installasjon uten mellomrom mellom viften og ventilasjonsrøret. Ø100 mm.

Exhaust and intake valve Type 125 VRF, Ø125 mm, white

Valve with frame and screw cap, adjusted by turning the screw cap.

leksjoner og øvelser, 0.5 dag, 15 brukere

Fan without controls. Timeless and smooth front. 68 m3/h - sound level 26 dB(A) - 3 year warranty.

Ventil med karm og skrulokk, justeres ved å dreie på skrulokket.

Used for mounting in cupboards and interior doors. Ensures the necessary extraction.

Complete telescopic valve with extra sound-insulated wall feed-through, insect net, external gray louvre grille, internal white wall valve with cord pull, dust filter and condensation-insulated cover. Used for wall thicknesses from 260-400 mm. Can be extended with a 20 cm. extension tube. Sound attenuation in the closed position is 62 dB and in the fully open position is 47 dB.

Fleksibel slange til kjøkkenvifter og tørketromler. Fremstilt i 0,13 mm miljøvennlig polyetylen med innsveiset stålspiral. Tåler temperaturer fra -18°C-80°C. Ø102x6000mm.

Som tilkjøp til aggregat Plus serien kan man med fordel montere en fuktighetssensor. I aggregater med en fuktføler montert vil avtrekket øke når fuktnivået kommer over en gitt grense.

Rist med firkantet ramme og rund flens. Uten insektnett.

Rist for innmuring i mur eller sokkel. Konstruksjonen forhindrer tilstopping med blader. Effektiv sikring mot skadedyr. Støpt i aluminium.

Overgangsstykke til 150x150 mm avtrekksrør. Med Duka klik-systemet klikkes to overgangsstykker sammen.

Lamellar valve type 70 attached transition piece Ø100 mm. Valve with loose slats that opens for internal air flow, but minimizes wind nuisance from the outside. Used in connection with fans, hoods and dryers.