Duka Ventilation

Fan with built-in humidity and time control. Timeless and smooth front. 68 m3/h - sound level 26 dB(A) - 3 year warranty.

Flap valve Type 112, 100x150 mm, white

One Filter set Ø160 mm, 2 pcs.

For walling in the facade.  The galvanized expanded metal mesh prevents clogging of the channel with leaves.

Fan with built-in humidity and time control. With ball bearings, which ensures a long service life. 185 m3/h - sound level 32 dB(A) - 5 year warranty.

One Pro 50S, Ø160 mm

Valve mesh that ensures that leaves and animals do not enter the ventilation duct. Mesh size 0.5x0.5 cm.  The metal legs facilitate installation in existing ducts / pipes.

Jalousie grille with insect net. Mounts directly to wall, plinth or gable.  Fasten with 1 screw in each corner or with sealant.  Can be used for all types of ventilation tasks.  The insect net prevents the entry of insects.  If the grate is used in the flue of a tumble dryer, we recommend removing the insect net so that lint from the tumbler does not clog the grate.  Manufactured in aluminium.

Fan is specially designed for ventilation of bathrooms. This model has no built-in control, which is simply connected to a separate on/off switch. The model can be mounted in the ceiling and wall.

One Filter set Ø160 mm, 5 sets of 2 pcs.

Flap valve Type 111, 150x150 mm, white

Used for mounting in cupboards and interior doors. Ensures the necessary extraction.

The newly developed multi-adapter, as the only one on the market, can be used both for the new DUKA Roof Hood and other common models on the market. Used as a transition from the Ø160 mm end of the roof hood.

Used for wall penetration type 202. With the Duka click system, two transition pieces are clicked together. Thereby, two different channel dimensions are combined in an easy and simple way. Always remember to seal with glue or silicone. Colour: White Manufactured in Polystyrene (HIPS).

Transition piece for wall penetration type 201. With the Duka click system, two transition pieces are clicked together. Thereby, two different channel dimensions are combined in an easy and simple way. Always remember to seal with glue or silicone. Colour: White Manufactured in Polystyrene (HIPS).

DUKA One S6B Plus is a ventilation solution with heat recovery specially designed for wet rooms. Bathrooms, utility rooms and toilets are the most moisture-laden in a home, so it is important to get the moisture away from these rooms and out into the open air. It is important to get the moisture out, as moisture provides good living conditions for house dust mites and mould, which in the worst case can cause allergies. That is why we have developed a special DUKA One model intended for the home's wet room. When the bathroom (or the other wet rooms) are not in use, the DUKA One unit will provide basic ventilation with heat recovery. The unit has a built-in humidity sensor, and when it is activated, the unit will switch to forced operation with pure extraction at stage III. This is important as the moisture from the bathroom must not move to the adjacent rooms. When the moisture level is again below the set limit, the unit will switch back to basic ventilation with heat recovery. DUKA Ventilation recommends! That the unit is connected to the external light switch, so that when the light is switched on in the bathroom, the unit will switch to forced operation with extraction on level II, so that air nuisance from visits to the toilet is minimised.

Transition piece Type 2, Ø102/127/162 mm

Sleeve for joining white ventilation pipes.

Reduction to white ventilation pipes.

Ølglass, 45 cl, avhendbar, gjennomsiktig (en pakke 22)

Transition piece for Ø100mm. With the Duka click system, two transition pieces are clicked together.

Flap valve Type 113, 150x150 mm, white

One-room heat recovery unit that can be used in both houses, apartments and businesses.

• All-in-one solution incl. control, with easy connection.
• This model has built-in Wi-Fi, which enables control via App.
• Internal screen where the supply air is blown upwards, which minimizes draft nuisance.
• Efficient and energy-conscious ventilation without opening doors and windows.

Complete telescopic valve with extra sound-insulated wall feed-through, insect net, external gray louvre grille, internal white wall valve with cord pull, dust filter and condensation-insulated cover. Used for wall thicknesses from 260-400 mm. Can be extended with a 20 cm. extension tube. Sound attenuation in the closed position is 62 dB and in the fully open position is 47 dB.