Viega Trykkrør & Beslag - side 5

Viega 2218

Press connector system with press connectors made of copper and gunmetal tested in acc. with DVGW worksheet W 534 with DVGW test seal and pipes made of copper in acc. with EN 1057 in acc. with DVGW worksheet GW 392.Suitable for drinking water installations in acc. with DIN 1988.For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber), up to 110 °C

Viega 2616.1

Viega 1115.1

Sanpress T-stykke med SC-Contur- gunmetal eller silisiumbronse- presskoblinger. Komponenter: EPDM tetningselementer d1: 35, d2: 35, d3: 35

Viega 1117.2

Viega 1115.1

Viega 1115.1

Prestabo Adapter with SC-Contur- galvanised non-alloyed steel- press connection, R-threadComponentsEPDM sealing element, polygon, VdS certificationd: 28, R: 12

Viega 1126.1

Press connector system with press connectors made of gunmetal, pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DINEN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene

Viega 2212

Sanpress-kobling med SC-Contur i messing eller silisiumbronse - trykkontakterKomponenterEPDM-tetningselementerd: 18

Sanpress Inox Adapter with SC-Contur- steel non-corroding- press connection, R-thread Components EPDM sealing element, polygon, VdS certificationd: 28, R: 34

Viega 2212.1

Viega 1111XL

Viega 2426

Viega 2416

Viega 2365

Sanpress Inox XL Reducer with SC-Contur- steel non-corroding- plug-in end, press connectionComponentsEPDM sealing element, cutting ring, separator ring, VdS certification d1: 76.1, d2: 54

Sanpress Inox T-piece with SC-Contur- steel non-corroding- press connectors, Rp-threadComponentsEPDM sealing elements, polygond1: 15, Rp: 12, d2: 15

Sanpress Plug-in piece- gunmetal or silicium bronze- plug-in end, R-threadComponentsPolygon.

Megapress-adapter med SC-Contur for stålrør i samsvar med DIN EN 10220/10255 - ulegert stål, sink-nikkelbelegg - trykkforbindelse, R-gjengekomponenter EPDM tetningselement, skjæring ring, separatorring, polygon DN: 10, D: 38 , R: 38

Viega 1116

Megapress-adapter med SC-Contur for stålrør i samsvar med DIN EN 10220/10255 - ulegert stål, sink-nikkelbelegg - trykktilkobling, Rp-gjengekomponenter EPDM tetningselement, skjæring ring, separatorring, polygon DN: 10, D: 38 , Rp: 38