Aeotec Smarthus

Universalsvitsj, trådløs, Gen5 Z-Wave

Modern Smart Homes do not depend on expensive wires. They are wireless. That means, just like Wi-Fi or 4G, there are areas where the signal may not be optimal. Our Aeotec Range Extender Zi fixes wireless weaknesses.

Install the extender in a standard wall outlet, connect it to your gateway and the Range Extender Zi will start to optimize your Zigbee powered smart home. Thanks to it’s specialized antenna it repeats and amplifies Zigbee radio signals.

The Extender has up to 100 m signal range and uses the latest Zigbee technology to let dead spots in your smart home be dead. Range Extender Zi is fully Zigbee 3.0 and Works with SmartThings certified.

It can be connected to most of the Zigbee empowered solutions like SmartThings or Home Assistant. Together with our Aeotec SmartThings products it perfects the smart home.

Fungerer som SmartThings Hub!

Aeotec Smart Home Hub er den sentrale forbindelsen og er den intelligente hjernen i Smart Home. Den lar deg koble trådløst til et bredt spekter av kompatible smartenheter som lys og sensorer. Det hele er dedikert til rutinene dine. Automatiser dine personlige rutiner med SmartThings -appen for mer komfort. Så du kan lage dine egne scenarier og egne kveldsrutiner. Bare slapp av på sofaen mens alle termostatene dine bytter til en behagelig temperatur, de smarte lysene dempes til en koselig atmosfære og det skapes en god stemning.

Huben passer perfekt inn i hjemmet ditt. Den lille og slanke Aeotec Smart Home Hub med sin enkle design passer perfekt inn i hjemmet ditt. Takket være dens innebygde Wi-Fi kan du plassere huben hvor som helst og legge til en stilig komponent i hjemmet ditt. Kompatibel med Google Assistant og Amazon Alexa.

Merk: Støtter Zigbee 3.0, Z-Wave, WiFi, Strømforsyning: 5V, 2A strømadapter (Type C-plugg), Regioner: EU (Type C-plugg), Z-Wave Frekvens: 868,4 MHz (EU)

Smart hub, trådløs, kablet, ZigBee 3.0, Wi-Fi, Bluetooth LE, Ethernet

Sirene, trådløs, Z-Wave Plus

Få vite når dører og vinduer åpnes eller lukkes. Aeotec flerbrukssensor kan enkelt installeres på dører og vinduer og overvåker dem ved hjelp av en magnetisk og akselerasjonssensor. Med SmartThings -appen mottar du varsler når dører og vinduer åpnes uventet. Videre kan du angi at tilkoblede lys skal slås av og på når du åpner dører, vinduer og skap.

Vibrasjonsdeteksjon. Ikke gå glipp av noe. Den innebygde gyrosensoren merker selv de minste vibrasjoner. Da vil du motta varsler på SmartThings -appen din, hvis noen banker på døren - når som helst og hvor som helst.

Komfortabel atmosfære i ditt hjem. Fra nå av vil du alltid vite når temperaturen endres i hjemmet ditt. La smartenheten din lage et praktisk inneklima ved å koble termostater eller klimaanlegg til SmartThings -appen. De smarte enhetene vil gjøre resten for deg.

Rett og slett smart. Utnytt det fulle potensialet til Aeotec Mutlipurpose Sensor og gjør den til en del av hjemmeautomatisering. For eksempel stenger rulleskodder automatisk på varme sommerdager for å unngå overoppheting av rommene. Spar energi. Med Aeotec flerbrukssensor kan du spare energi og oppvarmingskostnader. Sensoren oppdager åpne vinduer og sender et signal til din smarte termostat som automatisk kan låse temperaturen.

Merk: For å bruke alle funksjonene trenger du en Aeotec Smart Home Hub eller en annen Zigbee Hub. Strøm: Batteri CR2450. Zigbee 3.0

The Z-Stick 10 Pro empowers you to create your own custom Smart Home hub, offering full control and flexibility over your smart home ecosystem. With dual support for Z-Wave and Zigbee, it connects seamlessly to a wide range of devices, while its compatibility with platforms like HomeAssistant ensures a personalized, cloud-free, and secure smart home experience.

As the first USB Dongle featuring dual-radio support for both Z-Wave and Zigbee, it seamlessly integrates with your devices for unparalleled connectivity.

Få vite når det er bevegelse i hjemmet ditt. Aeotec bevegelsessensor kan enkelt integreres i hjemmet ditt takket være de kompakte dimensjonene. Med SmartThings -appen mottar du varsler hvis det er uventet bevegelse i hjemmet ditt. I tillegg kan tilkoblede enheter automatiseres når folk kommer og går. Automatiser belysningen når du går inn og ut av hjemmet ditt. Bruk Aeotec bevegelsessensor for din komfortable hjemkomst, og la kompatible smarte lys slås på når du går inn i korridoren. På samme måte kan du spare energi ved å sette regler for å slå av smartbelysningen når det ikke er mer bevegelse detektert på en bestemt tid.

Komfortabel atmosfære hjemme. Fra nå av vet du alltid når temperaturen endres i hjemmet ditt. La dine smarte enheter skape et praktisk inneklima ved å koble termostater eller klimaanlegg til SmartThings -appen. De smarte enhetene vil gjøre resten for deg.

Rett og slett smart. Utnytt Aeotecs bevegelsessensors fulle potensial og gjør den til en del av ditt hjemmesikkerhetssystem. For det kan du ganske enkelt integrere kompatible alarmsirener eller opiktale sendere (aktuatorer) og bare lage en regel med SmartThings -appen. Ved å utløse en visuell eller hørbar alarm i en øyeblikk av en uventet bevegelse, kan du øke sikkerheten i hjemmet ditt mot innbruddsforsøk.

Merk: For å bruke alle funksjonene trenger du en Aeotec Smart Home Hub eller en annen Zigbee Hub. Strøm: Batteri CR2. Zigbee 3.0

Aeotec Home Energy Meter 8 – Smart Energy Monitoring for Your Home.

With the Aeotec Home Energy Meter 8 (Z-Wave 800), you can optimize your energy consumption in real-time and efficiently reduce your electricity costs. This device precisely measures your power usage and excess energy from solar panels, ensuring smart energy utilization. Thanks to SmartThings integration, you can monitor your energy anytime, anywhere.

Motion for security. Motion for presence. Motion for management. The Aeotec MultiSensor 7 motion sensor is perfect for more than just an intelligent security system. With a 10 metre range and a 120° field of view, MultiSensor 7 captures motion data that can be used for everything from security to heating management to energy saving. Knowing if a room is occupied or a hall is being used is a powerful piece of data – MultiSensor 7 makes your home automation system more powerful and more intelligent.Temperature sensor.From motorised curtains and windows to fans and thermostats, there are a lot of ways that you can use Z-Wave to keep the temperature of a room absolutely perfect. MultiSensor 7 provides the intelligence to do just that. Within each sensor is an incremental temperature sensor capable of accurately measuring between -10~50°C (14 to 122°F) and reporting temperature changes back to a smart home gateway.Light sensor.Automated lighting is only as smart as the system that powers it. With MultiSensor 7 real-time, digital light sensor measuring the level of light in a room, your home control system will be able to intelligently maintain its ambiance. From opening and closing curtains, to setting lights to be the perfect level be it day or night, MultiSensor 7 is the smarts behind smart lighting.Humidity sensor.Spaces such as bathrooms and kitchens can be too humid, while some environments are often not humid enough. MultiSensor 6 offers incremental monitoring of a humidity ranging from 0% to 100%, allowing for the intelligent automation of fans, motorised windows, dehumidifiers and humidifiers. MultiSensor 7 monitors your home on such an infinitesimal level so that your home management system can make your environment truly perfect.Vibration sensor.It measures the environement its in, and it also measures itself. MultiSensor 7 contains a seismic sensor capable of detecting and reporting event-based vibrations. Those slight changes can be used to protect MultiSensor 7 – it knows if an intruder is tampering with it or if the sensor has accidentally moved from its place of installation. It also be able to record subtle seismic activity within your home.UV sensor.Perfectly managing an environment means understanding it perfectly. MultiSensor 6 accurately measures ultraviolet light the kind of light that causes everything from furniture bleaching to eye damage. Measured inline with the World Health Organisation UV Index, MultiSensor 7 measures a room UV level so that an environment can be managed through curtains, shades and lighting, and so that health and property recommendations can be made.Perfect power.Perfect battery life is perfect for every installation. For all those times, MultiSensor 7 can be run on mains power. Simply connect it to your home electricity using the provided USB cable and MultiSensor 7 will be able to run in an advanced mode, providing temperature, humidity and light readings in real-time.Features:Z-Wave MultiSensor with 6 integrated sensors (motion, temperature, light, humidity, vibration and UV).Built with Z-Wave 700 series - higher range, more efficient and better performance compared to older generation seriesWireless technology: Z-Wave Plus V2SmartStart enabledS2 SecurityUSB cable or battery operated (up to 2 years battery life)Data transmission to the control centre in real time and optimised sensor technology compared to its predecessor Aeotec MultiSensor 6Download high resolution images for Aeotec products.

Montering for automasjonsprosessor

Dørsensor, trådløs, Z-Wave Plus

Perfect and upgrade your Smart Home with TriSensor 8 – Z-Wave 800 series.

Introducing the future of smart home security and comfort with Aeotec TriSensor 8 (Z-Wave 800 Series). TriSensor 8 with comes with integrated temperature and light sensors. Experience ultimate control and peace of mind with precise motion detection, environmental monitoring, and seamless compatibility by state of the art Z-Wave 800 series, which guarantees safety, reliability and range for your Smart Home. Elevate your home automation game today!

Stylish design, simply mounted. With a width of only 41mm, the Aeotec button is nearly invisible and fits in harmoniously everywhere due to its simple design. Place the Aeotec Button on a flat surface or simply mount it on your fridge or wall. With just one touch of a button. The Aeotec Button allows you to control compatible light sources, household appliances and other smart home devices at the touch of a button. The three selectable control actions (tap once, tap twice, press and hold) allow you to control multiple devices, covering a wide range of applications. With your own pre-set scenarios, you can control your smart devices with a simple push of a button. Comfortable atmosphere in your home. From now on you will always know when the temperature in your home changes and can leave the rest to your smart devices. With the SmartThings App you can see the temperature in real time and use your air conditioning, heating and other compatible smart devices to restore a comfortable atmosphere in your home. Simply smart. Place the Aeotec Button in the exit area of your home and easily create a routine for leaving the house. When you leave the house, press the button and ask the compatible smart shutter control to shut down the shutters or the compatible smart thermostats to reduce the heat level. Save valuable time and energy with just one press of the button. Note: To use all functionalities you need an Aeotec Smart Home Hub or another Zigbee Hub. Power: Battery CR2450. Zigbee 3.0

Smart Metering. Local & secure. You’ll know how much you’re spending, and you’ll be able to reduce it. Know how much electricity your home is using. Home Energy Meter is the smart meter that you control. It’ll record up to 200 amps of your home’s electricity use in real-time with 99% accuracy. And it’ll share it with your Z-Wave gateway, but no one else. A meter, that collects precise data of your power producers. The Home Energy Meter can measure the overproduction of solar panels, wind turbines or other generators in your home grid. It is connected to max. 3 phases at your mains power connection. That allows to gather even the slightest overproduction, which would be feed in the grid from your power producers. Since it is more sufficient and economizing to use your own power instead of feeding it to the grid, the Home Energy Meter lets you automate your home to use as much of your power by yourself. Automate electrical appliances based on your power production. A home has numerous electrified devices, that are turned on regularly. Washing machines, pumps, air filters, air coolers, heaters or dishwashers consume a high percentage of our every day power consumption. Their activations are independent from the time of day. By timing their actuation based on the current power production of the solar panels or other producers, you will reduce your electricity bill. The Home Energy Meter delivers you the accurate power data, to trigger the automations on your home appliances. To realise the automations, you link Home Energy Meter to your Z-Wave Smart Home gateway with other actuators. Analyse your home energy consumption and ascertain power guzzlers. Home Energy Meter provides precise energy data to your Smart Home platform. Use your dashboard to record and track unusual peaks in the power consumption. Old appliances can waste a remarkable amount of power while they run or stay on standby. A close look at the power consumption chart will indicate wether it is sufficient to replace an old electric actuator. Studies have shown, that an average household can save up to 50% of standby power by analysing the power data and conclude specific solutions. Fantastic wireless range. Electricity meters are typically installed outside the home or in hard to reach places. As Home Energy Meter is installed right beside your home’s existing meter, it needs to be built upon excellent wireless technology. It is. Utilising Z-Wave Plus and Gen5, Home Energy Meter offers wireless connectivity that is optimised to transmit over greater distances and even through walls. Without interference, Home Energy Meter can transmit your home’s electricity use over a distance of 492 feet / 150 metres with your data securely broadcast using AES-128 encryption. Rune Dalsgaard *
24-04-2023 13:09:07 ShortDescription Smart Metering. Lokalt og sikkert. Du ved, hvor meget du bruger, og du kan reducere dine udgifter. Du ved, hvor meget elektricitet dit hjem bruger. Home Energy Meter er den smarte måler, som du styrer. Den registrerer op til 200 ampere af dit hjems elforbrug i realtid med 99 % nøjagtighed. Og den deler det med din Z-Wave gateway, men ingen andre. En måler, der indsamler præcise data om dine elproducenter. Home Energy Meter kan måle overproduktionen fra solpaneler, vindmøller eller andre generatorer i dit hjemmenet. Den er tilsluttet til maks. 3 faser på din netforbindelse. Det gør det muligt at opsamle selv den mindste overproduktion, som ville blive ført ind i nettet fra dine energiproducenter. Da det er mere tilstrækkeligt og besparende at bruge din egen strøm i stedet for at levere den til nettet, kan du med energimåleren til hjemmet automatisere dit hjem, så du selv kan bruge så meget af din strøm som muligt. Automatiser elektriske apparater baseret på din strømproduktion. Et hjem har mange elektrificerede apparater, der tændes regelmæssigt. Vaskemaskiner, pumper, luftfiltre, luftkølere, varmeapparater eller opvaskemaskiner forbruger en stor procentdel af vores daglige strømforbrug. Deres aktivering er uafhængig af tidspunktet på dagen. Ved at tidsindstille deres aktivering på baggrund af solpanelernes eller andre producenters aktuelle elproduktion vil du reducere din elregning. Energimåleren til hjemmet leverer dig nøjagtige strømdata, så du kan udløse automatiseringen af dine husholdningsapparater. For at gennemføre automatiseringen skal du forbinde Home Energy Meter med din Z-Wave Smart Home gateway med andre aktuatorer. Analyser dit energiforbrug i hjemmet, og find frem til de energislugere, der sluger strøm. Home Energy Meter leverer præcise energidata til din Smart Home-platform. Brug dit instrumentbræt til at registrere og spore usædvanlige spidser i energiforbruget. Gamle apparater kan spilde en bemærkelsesværdig mængde strøm, mens de kører eller står på standby. Et nærmere kig på diagrammet over strømforbruget viser, om det er tilstrækkeligt at udskifte en gammel elektrisk aktuator. Undersøgelser har vist, at en gennemsnitlig husstand kan spare op til 50 % af standbystrømmen ved at analysere strømdataene og konkludere specifikke løsninger. Fantastisk trådløs rækkevidde. Elmålere er typisk installeret uden for hjemmet eller på svært tilgængelige steder. Da Home Energy Meter installeres lige ved siden af hjemmets eksisterende måler, skal den bygge på fremragende trådløs teknologi. Det er. Ved hjælp af Z-Wave Plus og Gen5 tilbyder Home Energy Meter trådløs forbindelse, der er optimeret til at transmittere over større afstande og endda gennem vægge. Uden interferens kan Home Energy Meter transmittere dit hjems elforbrug over en afstand på 150 meter med sikker overførsel af dine data ved hjælp af AES-128-kryptering.

The Aeotec Water Sensor 7 is a flood sensor, a leak sensor and a safety sensor in one device.Leak detection. Leakages are a building block of expensive bills and costly damages when they appear where they shouldn\'t. Monitoring more than just the presence of liquid, the Aeotec Water Sensor 7 lives up to his name by monitoring the absence of water. When used to monitor tanks or pits, the Aeotec Water Sensor 7 can alert you when water levels get too low and trigger automation routines.Leak protection.The Aeotec Water Sensor 7 doesn’t just monitor water leaks. Once connected to your Z-Wave automation system, the Aeotec Water Sensor 7 can take protective measures to help limit the amount of damage caused by drips, leaks, bursts or other water flows. For example, in the event of a pipe burst, the smart device can instruct smart water valves, including those installed on the mains pipe, to automatically close.Features:Built with Z-Wave 700 series - higher range, more efficient and better performance compared to older generation seriesZ-Wave Water SensorSensor probe for the detection of leaks in difficult to access areasWireless technology: Z-Wave Plus V2SmartStart enabledS2 SecurityBattery powered (1x ER14250), up to 5 years battery lifetimeDownload high resolution images for Aeotec products.

Identify undesired wet spots directly. With the Aeotec Waterleak Sensor you are well prepared for possible leaks. The Waterleak Sensor can detect leaking water on the top and bottom side, enabling early intervention and damage reduction. Simply place the sensor where water could leak, for example under the sink, the washing machine or in the laundry cellar. As soon as a water leak is detected, you will receive a notification so you can act immediately. The notification can be made via the SmartThings App and compatible smart signal devices such as sirens and lights. Thanks to its slim and compact design, the Aeotec Water Leak Sensor can be optimally placed in gaps to detect leaking water as early as possible. Note: To use all functionalities, you need an Aeotec Smart Home Hub or another Zigbee Hub. Power: Battery CR2. Zigbee 3.0

Aeotec Dual Nano Switch med strømmåling

Run your smart home locally, privately and cloud-free. Aeotec Zi-Stick (Zigbee) lets you build your own Smart Home automation gateway using Zigbee 3.0 technology. 

The Zi-Stick is independent from platforms. Host platforms like Raspberry Pi, Orange Pi, BeagleBone, PC’s or Laptops can be transformed into universal Zigbee gateways connecting Zi-Stick to the USB interface. 

Zi-Stick is used in combination with Home Automation software. Software solutions like Home Assistant, openHab or Zigbee2MQTT are just some common solutions, which work with the Zi-Stick. 

Control and smart up your sensors, lights or switches. A huge variety of Zigbee products from different vendors can be connected to the Zi-Stick.

Automate and manage your Zigbee Smart Home. With the home automation software you can create scenes and rules, which will increase your comfort and safety at home. In combination with certain Zigbee devices, you can precisely analyze and optimize your energy consumption in the software’s user interface. Besides that your heating system can be smartened up and increase your comfort and energy efficiency. 

Features:
-Zigbee technology
-2.4GHz globally recognised frequency
-Zigbee compatible microcontroller EFR32MG21 inside
-Rx sensitivity: -99dBm
-Max Tx power: 20dBm
-Open area range: 200m
-USB interface with standard NCP commands from Silicon Labs. Easy to use as Serial Port on the Host machine (PC/laptop/single board computers)
-Multiple plugins for openHAB, Home Assistant, Node-RED and other DIY platforms C, Node.js and Python libraries to build your own application

Gen 5+, gateway, trådløs, Z-Wave Plus

The Aeotec Smart Plug Type F Wi-Fi is a smart way to integrate electrical devices into your smart home network and control their power supply. You can use this socket to automatically switch devices such as fans on or off according to a schedule or in combination with sensors such as a temperature sensor.

Thanks to the integration with the SmartThings app and voice assistants, you are in control of your connected devices anytime, anywhere. The smart plug is simply plugged in between the normal socket and the plug of the device, which makes installation easy.

Rated for 230V at 10A (2500Watt)

Introducing the Pico Switch - the ultimate solution for transforming your living space into a cutting-edge, intelligent haven. Say goodbye to outdated switches and welcome a new era of convenience, comfort, and control. Pico Switch is a retrofittable inwall switch to control and read the energy consumption of sockets, appliances or lights via Zigbee and the Aeotec Smart Home Hub.

Introducing the Pico Duo Switch - the ultimate solution for transforming your living space into a cutting-edge, intelligent haven. Say goodbye to outdated switches and welcome a new era of convenience, comfort, and control. Pico Duo Switch is a retrofittable inwall switch to control and read the energy consumption of sockets, appliances or lights via Zigbee and the Aeotec Smart Home Hub.

Retrofittable inwall Shutter module to control your blinds, shutter and venetian blinds remotely via an app.

Introducing the Aeotec Pico Shutter Zigbee integrated with SmartThings Shutter Series, revolutionizing your home into a cutting-edge, intelligent haven. Say goodbye to antiquated switches and embrace a new era of comfort, convenience, and control. Moreover, the Pico Series, powered by Zigbee and Matter technology, offers retrofittable in-wall switches for monitoring and managing socket or light energy consumption, seamlessly integrated with SmartThings for your Smart Home experience.

Power switch, trådløs, Z-Wave Plus