Prosessor-kjøler - side 14

Væskekjølesystem for prosessor, Radiatorstørrelse: 360 mm, (for: AM3, AM4, LGA115x Socket, LGA1200, LGA1700, LGA20XX), kobber, 120 mm

CPU kjøler, vannkjøling, kompatibel med AMD Socket AM4 / AM5 & Intel Socket LGA1150 / LGA1151 / LGA1155 / LGA1156 / LGA1200 / LGA1700 / LGA1851, vifte støynivå: max 29 dBA, vifte turtall: - max 2200 ± 10%, vifte CFM: max 76.2, statisk trykk: max 3.81 mmH₂O, PWM kontrollert, 277mm radiator med 2 x 120mm RGB vifter, 4-pins PWM & 3-pins ARGB forbindelse, inkludert kjølepasta, svart med RGB•

The Intel 1851 Delid-Die-Mate Heater V1 is a specially designed heating element for the Intel 1851 Delid-Die-Mate V1. The heater raises the temperature of both the CPU and the delidder to 165°C, the necessary temperature for delidding. The operation is controlled via a control unit with an OLED display, which is connected to the heater with two cables. A laptop/smartphone charger with at least 65 watts of power and a USB Type-C connector, which is not included, is required for the heater to operate. A small amount of thermal paste is also needed.

Heating element for warming the CPU
Designed for the Intel 1851 Delid-Die-Mate V1
Follow the warning instructions!
Scope of Delivery:

1x Intel 1851 Delid-Die-Mate Heater V1
1x Angle wrench
1x TG Cleaning Wipes
1x Kryonaut, 1g
Warning Instructions:

Note: When delidding with the Intel 1851 Delid-Die-Mate V1, the CPU should be heated to 165°C (the melting point of indium is 157°C) to liquefy the indium, making it easier to remove the heat spreader. This minimizes mechanical stress on the chip and helps prevent damage. Otherwise, there is a high risk that the CPU could be damaged during delidding.

Caution: delidding a CPU can be dangerous. Any damaged caused by this will not be covered by warranty. Make sure to ressearch how to before trying. 

CPU kjøler, vannkjøling, kompatibel med AMD Socket AM4 / AM5 & Intel Socket LGA1150 / LGA1151 / LGA1155 / LGA1156 / LGA1200 / LGA1700 / LGA1851, pumpe: Asetek 8th Gen Solution, støynivå: max 27.07 dBA (vifte) / max 25.3 dBA (pumpe), vifte turtall: 500 - 1450 ± 10%, vifte CFM: max 90.29, statisk trykk: max 1.54 mmH₂O, PWM kontrollert, 320mm radiator med 2 x 140mm vifter, 4-pins PWM forbindelse, inkludert kjølepasta, svart•

Termopute, svart (en pakke 4)

CPU kjøler, vannkjøling, kompatibel med AMD Socket AM4 / AM5 & Intel Socket LGA1150 / LGA1151 / LGA1155 / LGA1156 / LGA1200 / LGA1700 / LGA1851, pumpe: Asetek 8th Gen Solution, støynivå: max 27.07 dBA (vifte) / max 25.3 dBA (pumpe), vifte turtall: 500 - 1450 ± 10%, vifte CFM: max 90.29, statisk trykk: max 1.54 mmH₂O, PWM kontrollert, 320mm radiator med 2 x 140mm vifter, 4-pins PWM forbindelse, inkludert kjølepasta, hvit•

The Intel 1851 Delid-Die-Mate V1 is a tool for removing the heat spreader (delidding) from Intel processors in the "Intel Core Ultra 200" series (LGA1851 socket). By removing the Integrated Heat Spreader (IHS), CPUs can be cooled using the "Direct-Die" method, where the cooler is mounted directly onto the processor chip. This enables the most efficient transfer of thermal dissipation power (TDP), or simply put, the heat, from the processor to the cooling loop.

 

Caution: Removing the heat spreader (delidding) of a processor is done at your own risk! Delidding the CPU voids the manufacturer's warranty! Damage caused during delidding is not covered by the manufacturer! CPU should be heated. 

Water cooler optimized for Intel LGA1851 direct-die mounting with a nickel-plated copper microfin cold plate, low-flow-resistance jet channels and integrated RGB lighting.

The Intel 1851 Mycro Direct-Die Pro RGB V1 is designed to sit directly on a delidded Intel CPU to send heat straight into the water loop, with an acrylic-and-aluminum cover and controllable ARGB illumination.

• Direct-die installation for LGA1851 CPUs — requires removal of the ILM and CPU heatspreader; delidding is at your own risk


• Nickel-plated copper cold plate with microfins and a jet system, engineered for low flow resistance


• Acrylic layer tempered after milling to prevent stress cracks beneath the anodized aluminum lid


• Digital aRGB LEDs under the lid, controllable via a 3-pin ARGB header (+5V/DATA/GND); LEDs also illuminate the G1/4 fittings


• G1/4-inch female threading for standard fittings


• Tested with KryoSheet and thermal pads — additional pad thickness affected contact pressure and showed no significant temperature improvements

Built for users who want a compact direct cooling path from the CPU die into a water loop while retaining customizable RGB lighting.

CPU-vannkjølingssystem Antec VORTEX 240 ARGB har en 240 mm aluminiumsradiator, to 120 mm ARGB-vifter og bred kompatibilitet med Intel/AMD-sokler.

Bygget med kobberkjøleblokk og vifter med hydrauliske lagre. Denne kjøleren leverer 57.93 cfm luftstrøm ved 600–2000 rpm med et støynivå på 31.24 dBA, og inkluderer en ARGB-kontroller for synkronisert belysning med ASUS Aura Sync, MSI Mystic Light Sync, ASRock Polychrome RGB og RGB Fusion 2.0.

• 240 mm radiator i aluminium
• To 120 mm ARGB-vifter med hydrauliske lagre
• Luftstrøm: 57.93 cfm
• Viftehastighet: 600–2000 rpm
• Støynivå: 31.24 dBA
• Sokkelstøtte: AM3/AM4, LGA115x/1200/1700/20XX

Effektiv væskekjøling og tilpassbar ARGB-belysning for et ryddig og kompatibelt PC-bygg.

The 12th Gen Lapping-Tool is specially designed for the Intel 12th Gen Contact Frame and simplifies the process of lapping the processor. Using the enclosed screws, the CPU is simply mounted on the Lapping-Tool with the Contact Frame. This simulates the actual final position of the CPU in the socket on the motherboard.

CPU-kjøler Antec Vortex Lum 360 ARGB er et væskekjølesett for prosessor med opphengt spiralformet pumpehodedesign, kobberbaseplate, EPDM-rør med høy tetthet og 120mm ARGB PWM-radiatorvifter.

Utviklet for effektiv kjøling ved alle belastninger, kombinerer den en massiv kobberbaseplate med høy finnetetthet (13 finner) for rask varmeavledning, mens det vortex-inspirerte pumpehodet leverer ulike lyseffekter fra forskjellige vinkler.

• Opphengt spiralformet pumpehode inspirert av en vortex
• Massiv kobberbaseplate for svært effektiv kjøling
• EPDM-rør med høy tetthet for minimal væskefordamping
• 120mm ARGB PWM-radiatorvifter
• Viftehastighet: 800±200 til 1800±10% RPM
• Inkludert ARGB-kontroller synkroniseres med hovedkortet for farge og effekter per LED
• Støtte for CPU-sokler: Intel LGA 115X/1200/1700/1851/20XX; AMD AM3/AM4/AM5/TR4

Balansert kjøleytelse, bred sokkelkompatibilitet og tilpassbar ARGB-belysning i ett komplett væskekjølesett.

Thermal Grizzly Minus Pad Extreme is a great choice for applications where renewing thermal paste is not an option. This is particularly useful when distances between the heat source and the heat sink need to be bridged - for example with memory chips and voltage converters. The silicone-based thermal pad has a consistency similar to modeling clay. Compared to Minus pad 8 the thermal conductivity was improved by about 260 %.

• Most excellent thermal conductivity
• No bleeding
• long-term stability
• high compression rate

The minus pad extreme is available in size 120 x 20 mm and 100 x 100 mm with thicknesses of 0,5mm, 1mm, 1,5mm, 2mm, 3mm. See variants for various sizes and thickness. 

NB: Due to the consistency only one-time use is recommended 

CPU kjøler, vannkjøling, kompatibel med AMD Socket AM4 / AM5 & Intel Socket LGA1150 / LGA1151 / LGA1155 / LGA1156 / LGA1200 / LGA1700 / LGA1851, vifte støynivå: max 29.4 dBA, vifte turtall: - max 2150 ± 10%, vifte CFM: max 80.45, statisk trykk: max 2.65 mmH₂O, PWM kontrollert, 240mm radiator med 2 x 120mm RGB vifter, 4-pins PWM & 3-pins ARGB forbindelse, inkludert kjølepasta, innebygd skjerm innebygd skjerm, svart med RGB (kontrollert av: ASUS AURA / Asrock Polychrome Sync / Gigabyte Fusion / MSI Mystic Light)•

CPU kjøler, vannkjøling, kompatibel med AMD Socket AM4 / AM5 & Intel Socket LGA1700 / LGA1851, støynivå: / max 28 dBA (pumpe), 360mm radiatoringen vifte, 3-pins ARGB forbindelse, inkludert kjølepasta, innebygd skjerm innebygd skjerm, svart•

The HydroShift AIO features an innovative side-mounted design for its cooling tubes, which are snugly attached to the side of the radiator.

CPU kjøler, vannkjøling, kompatibel med AMD Socket AM4 / AM5 & Intel Socket LGA1150 / LGA1151 / LGA1155 / LGA1156 / LGA1700 / LGA1851, pumpe: Asetek 8th V2 , vifte støynivå: max 30.7 dBA, vifte turtall: - max 2200 ± 10%, vifte CFM: max 56.66, statisk trykk: max 3.56 mmH₂O, PWM kontrollert, 360mm radiator med 3 x 120mm RGB vifter, 4-pins PWM & 3-pins ARGB forbindelse, inkludert kjølepasta, innebygd skjerm innebygd skjerm, svart med RGB (kontrollert av: ASUS AURA / Asrock Polychrome Sync / Gigabyte Fusion / MSI Mystic Light)•

CPU kjøler, luft kjøler, kompatibel med AMD Socket AM4 / AM5 & Intel Socket LGA1150 / LGA1151 / LGA1155 / LGA1156 / LGA1200 / LGA1700 / LGA1851 / LGA2011 / LGA2011-V2 / LGA2066 / , støynivå: max 28.3 dBA, lufttrykk: max 81.88 CFM, statisk trykk: max 2.87 mmH₂O, vifte turtall: - max 2150 ± 10%, PWM kontrollert, 4-pins PWM & 3-pins ARGB forbindelse, 1 x 120mm vifte / 1 x 130mm vifte, 7 heatpipes, kjøler høyde: 158mm, inkludert kjølepasta, farge: svart med RGB

Thermal Grizzly TG Shield er en høytemperaturkonformal belegg for å beskytte komponenter mot kortslutninger med flytende metall. TG Shield tørker raskt for rask påføring og vil gi pålitelig beskyttelse av PC-komponenter i kombinasjon med flytende metall.

Oppgrader monteringssettet til Noctua SecuFirm2+-standard med Torx-skruer for bedre CPU-temperaturer - på AM5 kan forskyvningsmonteringssettet redusere CPU-temperaturer på 1-3°C. Som alle SecuFirm2-fester, kombinerer den enestående pålitelighet, optimalt kontakttrykk og enkel, grei installasjon. Inkludert Noctua magnetspiss NM-SD1 Torx T20 skrutrekker. Farge: sølv

Kompatible kjølere: NNH-D15 (SE-AM4, chromax.black), NH-D15S (chromax.black), NH-D14 (SE2011), NH-D9L (chromax.black), NH-C14, NH-C14S, NH-C12P (SE14), NH-L12, NH-U12, NH-U12F, NH-U12P (SE1366, SE2), NH-U9, NH-U9F, NH-U9B (SE2), NH-L9x65 (SE-AM4, chromax.black), NH-P1 (sjekk Noctuas nettsted for fremtidige kjølere)

NA-TPG1 er et enkelt, men svært effektivt middel for å forhindre oppbygging av kjølepasta i utskjæringene til varmesprederen til AMD AM5 CPU'er. Når monteringstrykket til kjøleløsningen påføres, vil overflødig kjølepastapresses utover. Med AM5 CPUer har denne overflødige kjølepasta en tendens til å samle seg i utskjæringene på sidene av varmesprederen og kan bli vanskelig å fjerne. Kombinert med de ti inkluderte NA-CW1 rengjøringsserviettene, gir NA-STPG1-settet deg alt du trenger for å holde AM5-prosessoren din ren.

Thermal pad with extremely high thermal conductivity and outstanding compressibility, electrically non-conductive and easy to apply for efficient heat transfer in electronic components.

The Minus Pad Pro builds on the proven Minus Pad 8 to deliver improved thermal performance and surface conformity, making it suitable for SSDs, GPU coolers, water-cooling blocks, voltage regulators and memory modules.

• Excellent thermal conductivity


• Outstanding compressibility for better surface contact


• Electrically non-conductive


• Easy to use and install


• Designed for use with SSDs, GPUs, water coolers and electronic components


• Part of the Minus Pad Basic, Advance and Pro series; further developed from Minus Pad 8

Gray material adapts to uneven surfaces to improve contact between components and heatsinks for more reliable heat transfer.

Væskekjølesystem for prosessor, Radiatorstørrelse: 240 mm, (for: LGA1851, LGA1700, LGA1200, LGA1151, LGA1150, LGA1156, AM4, AM5), 120 mm, svart

CPU kjøler, vannkjøling, kompatibel med AMD Socket AM4 / AM5 & Intel Socket LGA1150 / LGA1151 / LGA1155 / LGA1156 / LGA1200 / LGA1700 / LGA1851, vifte støynivå: max 29 dBA, vifte turtall: 800 - 2000 ± 10%, vifte CFM: max 67, statisk trykk: max 3.0 mmH₂O, PWM kontrollert, 277mm radiator med 2 x 120mm RGB vifter, 4-pins PWM & 3-pins ARGB forbindelse, inkludert kjølepasta, svart med RGB (kontrollert av: ASUS AURA)•

CPU contact frame for LGA 1851 (Intel 200 series). Can help improve cooling performance with better contact between CPU and cooler.

 Included in the package:

• 1x Intel 1851 CPU Contact Frame V1
• 4x Cylinder head screws with 3/8" UNC threads
• 1x 5/64" hex key
• 1x Torx T20 key

Termopute, blå

Wipes for removing Thermal Compounds (40 Pieces)