Ringke Mobil - Beskyttelsesglass - side 2

Ringke Cover Display tempered glass is a high-quality screen protector that effectively protects the display from scratches, bumps and falls. Perfectly matched to the device's external screen, it offers unparalleled protection thanks to its 9H hardness. A special oleophobic coating guarantees smooth swiping on the screen and an immediate response to touch, which significantly improves the comfort of use.

Ringke Cover Display tempered glass consists of three layers: oleophobic coating, tempered glass and AB film, which increases its strength and functionality. The anti-aliasing technology used allows the screen protector to integrate naturally into the device, eliminating sharp edges and providing a sleek look.

Provide your device with the highest protection and enjoy its impeccable appearance with Ringke Cover Display tempered glass.

In addition, to ensure easy installation, an assembly tool is included in the kit, which makes the application of the glass simpler and more precise.

* The glass is cut only to the flat part with an emphasized structure, in accordance with and on the basis of the die prepared by the manufacturer of a given phone model.
** Due to the variety of milling, a slight halo of air may form around the screen after installing the protective glass on the screen. This is a natural situation and depends on the device itself.

ASSEMBLY INSTRUCTIONS:
1. Start the installation in the bathroom right after bathing – the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2. Thoroughly clean and degrease the surface of the screen, then use a dry cloth to polish it to a shine. Make sure there are no dust particles left.
3. Put the frame with the glass already mounted on your phone – it will ensure a precise fit and make application easier.
4. Pull the starter film to start the process of automatically sticking the glass on the screen.
5. Press the glass in the designated areas. Do this thoroughly so that the adhesive layer bonds well to the surface.
6. Remove the frame and remove any air bubbles by swiping your finger in a circular motion.

Done! Enjoy a perfectly applied screen protector.

High-quality Ringke Easy Slide tempered glass with a protective filter function is an ideal way to protect the screen from damage and also limit its visibility to outsiders. The polarizing filter limits the visibility of the screen at an angle of 28° and completely reduces it at an angle of 40°.

The glass has a hardness of 9H, which is sufficient to effectively protect the screen, with high resistance of the glass itself to superficial scratches. It is also covered with an oleophobic layer, which reduces the degree of fingerprints leaving on the screen.

Additionally, to ensure easy installation, the Easy Slide installation tool is included to make glass application simpler and more precise.

Trust the Ringke brand and its excellent quality!

* The glass is cut only to the flat part with an emphasized structure, in accordance with and on the basis of the die prepared by the manufacturer of a given phone model.
** Due to the variety of milling, a slight halo of air may form around the screen after installing the protective glass on the screen. This is a natural situation and depends on the device itself.

High-quality Ringke Easy Slide tempered glass with a protective filter function is an ideal way to protect the screen from damage and also limit its visibility to outsiders. The polarizing filter limits the visibility of the screen at an angle of 28° and completely reduces it at an angle of 40°.

The glass has a hardness of 9H, which is sufficient to effectively protect the screen, with high resistance of the glass itself to superficial scratches. It is also covered with an oleophobic layer, which reduces the degree of fingerprints leaving on the screen.

Additionally, to ensure easy installation, the Easy Slide installation tool is included to make glass application simpler and more precise.

Trust the Ringke brand and its excellent quality!

* The glass is cut only to the flat part with an emphasized structure, in accordance with and on the basis of the die prepared by the manufacturer of a given phone model.
** Due to the variety of milling, a slight halo of air may form around the screen after installing the protective glass on the screen. This is a natural situation and depends on the device itself.

INSTALLATION INSTRUCTIONS:
1. Start installation in the bathroom right after bathing – the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2. Thoroughly clean and degrease the surface of the screen, then use a dry cloth to polish it to a shine. Make sure there are no dust particles left.
3. Put the frame with the glass already mounted on your phone – it will ensure a precise fit and make application easier.
4. Pull the starter film to start the process of automatically sticking the glass on the screen.
5. Press the glass in the designated areas. Do this thoroughly so that the adhesive layer bonds well to the surface.
6. Remove the frame and remove any air bubbles by swiping your finger in a circular motion.

Done! Enjoy a perfectly applied screen protector.

The crystal clear Easy Slide tempered glass from Ringke perfectly renders the displayed colors and does not affect the sensitivity of the touch.
Made of recycled and reinforced tempered glass. The high degree of hardness (9H) makes Easy Slide scratch-resistant even in contact with sharp objects (knife or keys).

The glass is covered with a special oleophobic coating, thanks to which the aspect of leaving fingerprints or other contaminants on the surface of the glass is minimized.

Easy Slide is dedicated in particular to protecting the screen from scratches as well as impacts resulting from an unexpected fall of the phone.

Additionally, to ensure easy installation, the Easy Slide installation tool is included to make glass application simpler and more precise.

* The glass has the widest possible Case Friendly die-cut, which means it will be compatible with most cases on the market and with any Ringke case.
** Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself.

ASSEMBLY INSTRUCTIONS:
1. Start the installation in the bathroom right after bathing – the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2. Thoroughly clean and degrease the surface of the screen, then use a dry cloth to polish it to a shine. Make sure there are no dust particles left.
3. Put the frame with the glass already mounted on your phone – it will ensure a precise fit and make application easier.
4. Pull the starter film to start the process of automatically sticking the glass on the screen.
5. Press the glass in the designated areas. Do this thoroughly so that the adhesive layer bonds well to the surface.
6. Remove the frame and remove any air bubbles by swiping your finger in a circular motion.

Done! Enjoy a perfectly applied screen protector.

The crystal clear Easy Slide tempered glass from Ringke perfectly renders the displayed colors and does not affect the sensitivity of the touch.
Made of recycled and reinforced tempered glass. The high degree of hardness (9H) makes Easy Slide scratch-resistant even in contact with sharp objects (knife or keys).

The glass is covered with a special oleophobic coating, thanks to which the aspect of leaving fingerprints or other contaminants on the surface of the glass is minimized.

Easy Slide is dedicated in particular to protecting the screen from scratches as well as impacts resulting from an unexpected fall of the phone.

Additionally, to ensure easy installation, the Easy Slide installation tool is included to make glass application simpler and more precise.

* The glass has the widest possible Case Friendly die-cut, which means it will be compatible with most cases on the market and with any Ringke case.
** Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself.

The crystal clear Easy Slide tempered glass from Ringke perfectly renders the displayed colors and does not affect the sensitivity of the touch.
Made of recycled and reinforced tempered glass. The high degree of hardness (9H) makes Easy Slide scratch-resistant even in contact with sharp objects (knife or keys).

The glass is covered with a special oleophobic coating, thanks to which the aspect of leaving fingerprints or other contaminants on the surface of the glass is minimized.

Easy Slide is dedicated in particular to protecting the screen from scratches as well as impacts resulting from an unexpected fall of the phone.

Additionally, to ensure easy installation, the Easy Slide installation tool is included to make glass application simpler and more precise.

* The glass has the widest possible Case Friendly die-cut, which means it will be compatible with most cases on the market and with any Ringke case.
** Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself.

Ringke Easy Slide Privacy is a premium tempered glass with an advanced privacy filter. A special privatization layer blocks the field of view of people looking from the side, so that the content displayed on the screen is visible only to you. The screen remains clear and legible when viewed directly, but darkens when viewed from the side. This is ideal for bus travel, working in a café or in any public place.

The glass is made of reinforced material with a hardness of 9H, which effectively protects the screen of your smartphone from scratches in contact with keys, coins or other sharp objects. With a thickness of just 0.35 mm, the protection remains almost invisible and does not affect the slim silhouette of the phone. The rugged design absorbs impact energy in unexpected drops, protecting the display from cracks. The oleophobic coating used minimizes fingerprints and other contaminants remaining on the glass surface.

Included is a dedicated Easy Slide installation tool that makes glass application simpler and more precise. The wide Case Friendly cutout ensures full compatibility with most cases on the market. The smooth 2.5D edges perfectly match the device's display, maintaining high touch sensitivity.