Ringke Mobil - Beskyttelsesglass

The crystal clear Easy Slide tempered glass from Ringke perfectly renders the displayed colors and does not affect the sensitivity of the touch.
Made of recycled and reinforced tempered glass. The high degree of hardness (9H) makes Easy Slide scratch-resistant even in contact with sharp objects (knife or keys).

The glass is covered with a special oleophobic coating, thanks to which the aspect of leaving fingerprints or other contaminants on the surface of the glass is minimized.

Easy Slide is dedicated in particular to protecting the screen from scratches as well as impacts resulting from an unexpected fall of the phone.

Additionally, to ensure easy installation, the Easy Slide installation tool is included to make glass application simpler and more precise.

* The glass has the widest possible Case Friendly die-cut, which means it will be compatible with most cases on the market and with any Ringke case.
** Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself.

ASSEMBLY INSTRUCTIONS:
1. Start the installation in the bathroom right after bathing – the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2. Thoroughly clean and degrease the surface of the screen, then use a dry cloth to polish it to a shine. Make sure there are no dust particles left.
3. Put the frame with the glass already mounted on your phone – it will ensure a precise fit and make application easier.
4. Pull the starter film to start the process of automatically sticking the glass on the screen.
5. Press the glass in the designated areas. Do this thoroughly so that the adhesive layer bonds well to the surface.
6. Remove the frame and remove any air bubbles by swiping your finger in a circular motion.

Done! Enjoy a perfectly applied screen protector.

Ringke Easy Slide tempered glass is a precise screen protector. Included is the innovative Easy Slide mounting frame, which makes glass application simpler and more accurate than ever. The crystal-clear surface does not affect the colors displayed by the screen or the sensitivity of the touch.

The glass is made of reinforced material with a hardness of 9H, which effectively protects the screen of your smartphone from scratches in contact with keys, coins or other sharp objects. With a thickness of just 0.35 mm, the protection remains almost invisible and does not affect the slim silhouette of the phone. The rugged design absorbs impact energy in unexpected drops, protecting the display from cracks.

The oleophobic coating used minimizes fingerprints and other contaminants remaining on the glass surface. This keeps the screen clean for longer and makes everyday use more enjoyable. The wide Case Friendly cutout ensures full compatibility with most cases available on the market and all Ringke cases.

The crystal clear Easy Slide tempered glass from Ringke perfectly renders the displayed colors and does not affect the sensitivity of the touch.
Made of recycled and reinforced tempered glass. The high degree of hardness (9H) makes Easy Slide scratch-resistant even in contact with sharp objects (knife or keys).

The glass is covered with a special oleophobic coating, thanks to which the aspect of leaving fingerprints or other contaminants on the surface of the glass is minimized.

Easy Slide is dedicated in particular to protecting the screen from scratches as well as impacts resulting from an unexpected fall of the phone.

Additionally, to ensure easy installation, the Easy Slide installation tool is included to make glass application simpler and more precise.

* The glass has the widest possible Case Friendly die-cut, which means it will be compatible with most cases on the market and with any Ringke case.
** Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself.

ASSEMBLY INSTRUCTIONS:
1. Start the installation in the bathroom right after bathing – the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2. Thoroughly clean and degrease the surface of the screen, then use a dry cloth to polish it to a shine. Make sure there are no dust particles left.
3. Put the frame with the glass already mounted on your phone – it will ensure a precise fit and make application easier.
4. Pull the starter film to start the process of automatically sticking the glass on the screen.
5. Press the glass in the designated areas. Do this thoroughly so that the adhesive layer bonds well to the surface.
6. Remove the frame and remove any air bubbles by swiping your finger in a circular motion.

Done! Enjoy a perfectly applied screen protector.

The case + glass from Ringke isa complex solution that will protect your watch from all threats. Slim and lightweight PC overlay designed to fit perfectly. Slim is a stylish way to diversify and protect your smartwatch screen.

High-quality tempered glass is the perfect way to protect the screen from scratches and impacts. It has a hardness of 9H, which allows for effective protection of the display, with high resistance of the glass itself to superficial scratches. It is also covered with an oleophobic layer, which reduces the degree of fingerprints leaving on the screen.

* The glass is cut only to the flat part with an emphasized structure, in accordance with and on the basis of a die cut prepared by the manufacturer of a given model.
** Due to the variety of milling, a slight halo of air may form around the screen after installing the protective glass on the screen. This is a natural situation and depends on the device itself.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the shell as evenly as you can - you can position it with the help of mounting tools.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

The crystal clear Easy Slide tempered glass from Ringke perfectly renders the displayed colors and does not affect the sensitivity of the touch.
Made of recycled and reinforced tempered glass. The high degree of hardness (9H) makes Easy Slide scratch-resistant even in contact with sharp objects (knife or keys).

The glass is covered with a special oleophobic coating, thanks to which the aspect of leaving fingerprints or other contaminants on the surface of the glass is minimized.

Easy Slide is dedicated in particular to protecting the screen from scratches as well as impacts resulting from an unexpected fall of the phone.

Additionally, to ensure easy installation, the Easy Slide installation tool is included to make glass application simpler and more precise.

* The glass has the widest possible Case Friendly die-cut, which means it will be compatible with most cases on the market and with any Ringke case.
** Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself.

ASSEMBLY INSTRUCTIONS:
1. Start the installation in the bathroom right after bathing – the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2. Thoroughly clean and degrease the surface of the screen, then use a dry cloth to polish it to a shine. Make sure there are no dust particles left.
3. Put the frame with the glass already mounted on your phone – it will ensure a precise fit and make application easier.
4. Pull the starter film to start the process of automatically sticking the glass on the screen.
5. Press the glass in the designated areas. Do this thoroughly so that the adhesive layer bonds well to the surface.
6. Remove the frame and remove any air bubbles by swiping your finger in a circular motion.
Done! Enjoy a perfectly applied screen protector.

The crystal clear Easy Slide tempered glass from Ringke perfectly renders the displayed colors and does not affect the sensitivity of the touch.
Made of recycled and reinforced tempered glass. The high degree of hardness (9H) makes Easy Slide scratch-resistant even in contact with sharp objects (knife or keys).

The glass is covered with a special oleophobic coating, thanks to which the aspect of leaving fingerprints or other contaminants on the surface of the glass is minimized.

Easy Slide is dedicated in particular to protecting the screen from scratches as well as impacts resulting from an unexpected fall of the phone.

Additionally, to ensure easy installation, the Easy Slide installation tool is included to make glass application simpler and more precise.

* The glass has the widest possible Case Friendly die-cut, which means it will be compatible with most cases on the market and with any Ringke case.
** Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself.

ASSEMBLY INSTRUCTIONS:
1. Start the installation in the bathroom right after bathing – the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2. Thoroughly clean and degrease the surface of the screen, then use a dry cloth to polish it to a shine. Make sure there are no dust particles left.
3. Put the frame with the glass already mounted on your phone – it will ensure a precise fit and make application easier.
4. Pull the starter film to start the process of automatically sticking the glass on the screen.
5. Press the glass in the designated areas. Do this thoroughly so that the adhesive layer bonds well to the surface.
6. Remove the frame and remove any air bubbles by swiping your finger in a circular motion.

Done! Enjoy a perfectly applied screen protector.

Ringke Camera Frame Protector is a set of single covers for all lenses of your smartphone's camera. Each of them receives its own tempered glass enclosed in an aluminum frame, which effectively protects against scratches and mechanical damage. Precise workmanship makes the installation of each cover quick and trouble-free, and a special mounting cap facilitates perfect positioning.

A specialized black print on the edges prevents reflections from flash or sunlight. The overlays are glued on the sides of each element, so they do not negatively affect the quality of the photos. The top of each of the lenses is covered with a special oleophobic coating, which does not leave fingerprints and is very easy to clean. Tempered glass with a hardness class of 9H effectively protects against scratches.

Despite the many layers, the covers remain low in thickness and do not protrude significantly above the camera housing. Thanks to their compact design, the overlays work with most cases with wide camera cutouts.

Ringke Easy Slide tempered glass is a precise screen protector. Included is the innovative Easy Slide mounting frame, which makes glass application simpler and more accurate than ever. The crystal-clear surface does not affect the colors displayed by the screen or the sensitivity of the touch.

The glass is made of reinforced material with a hardness of 9H, which effectively protects the screen of your smartphone from scratches in contact with keys, coins or other sharp objects. With a thickness of just 0.35 mm, the protection remains almost invisible and does not affect the slim silhouette of the phone. The rugged design absorbs impact energy in unexpected drops, protecting the display from cracks.

The oleophobic coating used minimizes fingerprints and other contaminants remaining on the glass surface. This keeps the screen clean for longer and makes everyday use more enjoyable. The wide Case Friendly cutout ensures full compatibility with most cases available on the market and all Ringke cases.

Ringke Invisible Defender is a high-quality tempered glass that combines extraordinary durability with great comfort of use. The accessory has a multi-layer structure and a hardness of 9H (on the Mohs scale), which, together with the oleophobic coating, guarantees excellent protection against damage and dirt. In addition, the cover is splinter free (so-called safety glass), so even in the event of a break, it will not break into dozens of sharp pieces.

ID Glass is extremely thin (its thickness is only 0.33 mm), does not negatively affect the touch in any way, and thanks to its high transparency, it offers a razor-sharp image. In addition, they are equipped with rounded 2.5D edges and precise cutouts for all necessary elements, such as the front speaker or camera lens.

Ringke Cover Display tempered glass is a high-quality screen protector that effectively protects the display from scratches, bumps and falls. Perfectly matched to the device's external screen, it offers unparalleled protection thanks to its 9H hardness. A special oleophobic coating guarantees smooth swiping on the screen and an immediate response to touch, which significantly improves the comfort of use.

Ringke Cover Display tempered glass consists of three layers: oleophobic coating, tempered glass and AB film, which increases its strength and functionality. The anti-aliasing technology used allows the screen protector to integrate naturally into the device, eliminating sharp edges and providing a sleek look.

Provide your device with the highest protection and enjoy its impeccable appearance with Ringke Cover Display tempered glass.

In addition, to ensure easy installation, an assembly tool is included in the kit, which makes the application of the glass simpler and more precise.

* The glass is cut only to the flat part with an emphasized structure, in accordance with and on the basis of the die prepared by the manufacturer of a given phone model.
** Due to the variety of milling, a slight halo of air may form around the screen after installing the protective glass on the screen. This is a natural situation and depends on the device itself.

ASSEMBLY INSTRUCTIONS:
1. Start the installation in the bathroom right after bathing – the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2. Thoroughly clean and degrease the surface of the screen, then use a dry cloth to polish it to a shine. Make sure there are no dust particles left.
3. Put the frame with the glass already mounted on your phone – it will ensure a precise fit and make application easier.
4. Pull the starter film to start the process of automatically sticking the glass on the screen.
5. Press the glass in the designated areas. Do this thoroughly so that the adhesive layer bonds well to the surface.
6. Remove the frame and remove any air bubbles by swiping your finger in a circular motion.

Done! Enjoy a perfectly applied screen protector.

High-quality Ringke Easy Slide tempered glass with a protective filter function is an ideal way to protect the screen from damage and also limit its visibility to outsiders. The polarizing filter limits the visibility of the screen at an angle of 28° and completely reduces it at an angle of 40°.

The glass has a hardness of 9H, which is sufficient to effectively protect the screen, with high resistance of the glass itself to superficial scratches. It is also covered with an oleophobic layer, which reduces the degree of fingerprints leaving on the screen.

Additionally, to ensure easy installation, the Easy Slide installation tool is included to make glass application simpler and more precise.

Trust the Ringke brand and its excellent quality!

* The glass is cut only to the flat part with an emphasized structure, in accordance with and on the basis of the die prepared by the manufacturer of a given phone model.
** Due to the variety of milling, a slight halo of air may form around the screen after installing the protective glass on the screen. This is a natural situation and depends on the device itself.

INSTALLATION INSTRUCTIONS:
1. Start installation in the bathroom right after bathing – the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2. Thoroughly clean and degrease the surface of the screen, then use a dry cloth to polish it to a shine. Make sure there are no dust particles left.
3. Put the frame with the glass already mounted on your phone – it will ensure a precise fit and make application easier.
4. Pull the starter film to start the process of automatically sticking the glass on the screen.
5. Press the glass in the designated areas. Do this thoroughly so that the adhesive layer bonds well to the surface.
6. Remove the frame and remove any air bubbles by swiping your finger in a circular motion.

Done! Enjoy a perfectly applied screen protector.

The case + glass from Ringke isa complex solution that will protect your watch from all threats. Slim and lightweight PC overlay designed to fit perfectly. Slim is a stylish way to diversify and protect your smartwatch screen.

High-quality tempered glass is the perfect way to protect the screen from scratches and impacts. It has a hardness of 9H, which allows for effective protection of the display, with high resistance of the glass itself to superficial scratches. It is also covered with an oleophobic layer, which reduces the degree of fingerprints leaving on the screen.

* The glass is cut only to the flat part with an emphasized structure, in accordance with and on the basis of a die cut prepared by the manufacturer of a given model.
** Due to the variety of milling, a slight halo of air may form around the screen after installing the protective glass on the screen. This is a natural situation and depends on the device itself.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the shell as evenly as you can - you can position it with the help of mounting tools.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Crystal clear protective film covering the entire surface of the screen. It is made of high-quality urethane polycarbonate and has scratch resistance, which effectively protects the screen from damage. The film perfectly renders the displayed colors and has a special anti-grease coating that protects the screen from leaving fingerprints.

Its additional advantage is the ability to match most cases available on the market - no more problem with choosing a case for the screen protector used!
Installation of the film is extremely easy and accessible to every user, as the film has been designed in such a way that it does not leave air bubbles after application.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the shell as evenly as you can.

Ringke Easy Slide Privacy is a premium tempered glass with an advanced privacy filter. A special privatization layer blocks the field of view of people looking from the side, so that the content displayed on the screen is visible only to you. The screen remains clear and legible when viewed directly, but darkens when viewed from the side. This is ideal for bus travel, working in a café or in any public place.

The glass is made of reinforced material with a hardness of 9H, which effectively protects the screen of your smartphone from scratches in contact with keys, coins or other sharp objects. With a thickness of just 0.35 mm, the protection remains almost invisible and does not affect the slim silhouette of the phone. The rugged design absorbs impact energy in unexpected drops, protecting the display from cracks. The oleophobic coating used minimizes fingerprints and other contaminants remaining on the glass surface.

Included is a dedicated Easy Slide installation tool that makes glass application simpler and more precise. The wide Case Friendly cutout ensures full compatibility with most cases on the market. The smooth 2.5D edges perfectly match the device's display, maintaining high touch sensitivity.

High-quality Ringke ID tempered lenses are the perfect way to protect the screen from scratches and impacts. It has a thickness of 0.3mm and a hardness of 9H, which is enough to effectively protect the screen, with high resistance of the glass itself to superficial scratches. It is also covered with a hydrophobic and oleophobic layer, which reduces the degree of fingerprints leaving on the screen.

Trust the Ringke brand and its excellent quality!

* The glass is cut only to the flat part with an emphasized structure, in accordance with and on the basis of the die prepared by the manufacturer of a given phone model.
** Due to the variety of milling, a slight halo of air may form around the screen after installing the protective glass on the screen. This is a natural situation and depends on the device itself.

Ringke protective overlays are a simple way to protect the phone's lens from scratches or breakage. Made of high-quality aluminum and glass, they will allow you to maintain the original appearance of your device, and a special coating will prevent fingerprints. Thanks to the included mounting cap, installation is simple and affordable for every user.

The crystal clear Easy Slide tempered glass from Ringke perfectly renders the displayed colors and does not affect the sensitivity of the touch.
Made of recycled and reinforced tempered glass. The high degree of hardness (9H) makes Easy Slide scratch-resistant even in contact with sharp objects (knife or keys).

The glass is covered with a special oleophobic coating, thanks to which the aspect of leaving fingerprints or other contaminants on the surface of the glass is minimized.

Easy Slide is dedicated in particular to protecting the screen from scratches as well as impacts resulting from an unexpected fall of the phone.

Additionally, to ensure easy installation, the Easy Slide installation tool is included to make glass application simpler and more precise.

* The glass has the widest possible Case Friendly die-cut, which means it will be compatible with most cases on the market and with any Ringke case.
** Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself.

ASSEMBLY INSTRUCTIONS:
1. Start the installation in the bathroom right after bathing – the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2. Thoroughly clean and degrease the surface of the screen, then use a dry cloth to polish it to a shine. Make sure there are no dust particles left.
3. Put the frame with the glass already mounted on your phone – it will ensure a precise fit and make application easier.
4. Pull the starter film to start the process of automatically sticking the glass on the screen.
5. Press the glass in the designated areas. Do this thoroughly so that the adhesive layer bonds well to the surface.
6. Remove the frame and remove any air bubbles by swiping your finger in a circular motion.

Done! Enjoy a perfectly applied screen protector.

Ringke Easy Slide Anti Reflective is tempered glass with a dedicated mounting frame that minimizes glare and makes it easier to use the screen in bright light. A special anti-reflective coating ensures that the display remains legible even in bright sunlight.

The glass reaches a hardness of 9H, which means an effective barrier against scratches from keys, coins and other items in your pocket. The hardened material withstands everyday impacts and protects the display from cracks during falls. The 2.5D rounded edges blend perfectly with the screen profile for smooth transitions and comfortable gestures from the edge. The glass design maintains full touch sensitivity and screen responsiveness, without affecting the comfort of use. The Easy Slide mounting frame eliminates the risk of incorrect alignment, which is especially important for the first installation.

The anti-reflective coating is a key feature of this glass, reducing light glare and improving the readability of the screen on sunny days. The multi-layer coating combines anti-reflective features with an oleophobic layer that minimizes the visibility of fingerprints and makes it easier to clean the surface. High clarity preserves the natural colors and sharpness of the display without affecting image quality. The glass is compatible with most cases on the market, so you can freely customize the look of your phone without worrying about compatibility.

The Ringke Tempered Glass Camera Cover is designed specifically to provide protection and a stylish finish for your device. Using advanced technologies and high-quality materials, it is the perfect complement to your smartphone.

Made of high-hardness tempered glass, the cover protects against scratches, bumps and other mechanical damage that may occur during daily use of the phone. The clear glass allows you to maintain the original look of your phone while adding a sleek and modern touch. The Ringke cover is thin and lightweight, which does not affect the comfort of using the device.

Ringke Easy Slide tempered glass is a precise screen protector. Included is the innovative Easy Slide mounting frame, which makes glass application simpler and more accurate than ever. The crystal-clear surface does not affect the colors displayed by the screen or the sensitivity of the touch.

The glass is made of reinforced material with a hardness of 9H, which effectively protects the screen of your smartphone from scratches in contact with keys, coins or other sharp objects. With a thickness of just 0.35 mm, the protection remains almost invisible and does not affect the slim silhouette of the phone. The rugged design absorbs impact energy in unexpected drops, protecting the display from cracks.

The oleophobic coating used minimizes fingerprints and other contaminants remaining on the glass surface. This keeps the screen clean for longer and makes everyday use more enjoyable. The wide Case Friendly cutout ensures full compatibility with most cases available on the market and all Ringke cases.

Ringke protective overlays are a simple way to protect the phone's lens from scratches or breakage. Made of high-quality aluminum and glass, they will allow you to maintain the original appearance of your device, and a special coating will prevent fingerprints. Thanks to the included mounting cap, installation is simple and affordable for every user.

Ringke Camera Full Cover is an advanced camera cover made of 9H tempered glass that provides comprehensive protection for lenses against scratches, bumps and everyday mechanical damage. The clear glass retains the original look of the device while adding an elegant touch and not affecting the quality of the photos.

The multi-layer construction consists of five layers, which together form an effective protective barrier. The oleophobic coating on the outer layer reduces fingerprints and grease stains, keeping the lenses clean for a long time. 9H tempered glass provides a protective core, preventing scratches and cracks. A shatter-resistant layer and silk-screen anti-reflective film provide additional protection and clarity of the image. The whole thing is mounted on an acrylic plate, which ensures stability and a perfect fit.

The thin and light design does not add unnecessary weight to the device, maintaining the comfort of use. Precise cutouts guarantee full compatibility with the camera and flash, without affecting the shooting functionality. Two covers are included along with installation kits, ensuring convenient installation and a spare in case of damage or replacement.

Ringke Camera Frame Protector is a set of single covers for all lenses of your smartphone's camera. Each of them receives its own tempered glass enclosed in an aluminum frame, which effectively protects against scratches and mechanical damage. Precise workmanship makes the installation of each cover quick and trouble-free, and a special mounting cap facilitates perfect positioning.

A specialized black print on the edges prevents reflections from flash or sunlight. The overlays are glued on the sides of each element, so they do not negatively affect the quality of the photos. The top of each of the lenses is covered with a special oleophobic coating, which does not leave fingerprints and is very easy to clean. Tempered glass with a hardness class of 9H effectively protects against scratches.

Despite the many layers, the covers remain low in thickness and do not protrude significantly above the camera housing. Thanks to their compact design, the overlays work with most cases with wide camera cutouts.

Ringke Easy Slide Privacy is a premium tempered glass with an advanced privacy filter. A special privatization layer blocks the field of view of people looking from the side, so that the content displayed on the screen is visible only to you. The screen remains clear and legible when viewed directly, but darkens when viewed from the side. This is ideal for bus travel, working in a café or in any public place.

The glass is made of reinforced material with a hardness of 9H, which effectively protects the screen of your smartphone from scratches in contact with keys, coins or other sharp objects. With a thickness of just 0.35 mm, the protection remains almost invisible and does not affect the slim silhouette of the phone. The rugged design absorbs impact energy in unexpected drops, protecting the display from cracks. The oleophobic coating used minimizes fingerprints and other contaminants remaining on the glass surface.

Included is a dedicated Easy Slide installation tool that makes glass application simpler and more precise. The wide Case Friendly cutout ensures full compatibility with most cases on the market. The smooth 2.5D edges perfectly match the device's display, maintaining high touch sensitivity.

Perfectly fitting and crystal clear tempered glass from Ringke designed to protect your phone's camera lens from damage.
Ringke glass is a 5-layer protective coating made of high-quality components.

The glass fully covers the camera sections and provides protection against scratches and breakage.