Fluke Instrumenter - side 2

Test leads are an integral part of the complete measurement system and extend the capabilities of your digital multimeter. The TL224 SureGripTM Insulated Test leads offer reinforced strain relief and includes banana jack termination for a variety of test lead configurations. SureGripTM accessories are designed to improve steadiness in slippery hands. Rubber over molded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.DMM test leads (red, black) with safety shrouded, standard diameter banana plugsRight angle connector on one end and straight connector on the otherReinforced strain relief1.5 meter silicone-insulated wire resists heat & coldCAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed

The Fluke two-pole testers are now more rugged and easier to use than ever before.Fast test results the way you need them, with large, easy-to-use buttons, bright backlights, and clear audible and physical indicators designed for any work situation.Rugged, high-quality construction is built to last. This includes a heavy duty molded case, a thicker cord with wear indicator, sturdy battery case, and well-fitting and durable probe protector.Enhanced ergonomic design feels good in your hand, is easy to use (even with gloves on) and quick, secure probe docking.A complete family of testers with the features, functions, and price/performance to fit your applications and preferences.SpecificationsVoltage AC/DC 6V - 690VContinuity 0 - 400 kFrequency 0 / 40 - 400 HzPhase rotation 100 V - 690 VResistance measurement Up to 1999 Response Time (LED indicator) < 0.5 s200 k input impedance Current draw 3,5 mA @ 690 V Current draw 1,15 mA @ 230 V7k input impedance (with load buttons pressed) Current draw 30 mA @ 230 VSafety rating CAT III 690V/CAT IV 600VIP rating P64SpecificationsPower requirement 2-AA batteriesNet weight 280 gSize (length, width, height 26 x 7 x 3.8 cm

En par (rød, svart) slanke probekropper for å undersøke tett plasserte eller innfelte terminaler. Harde rustfrie stålkrokspisser. Flat bladedesign for å holde seg sikkert i elektriske veggbokser med bladtype. CAT II 1000 V, 10 A rangering EN/IEC 61010-031:2002 +A1:2008

Gi dine Fluke-verktøy den beskyttelsen de fortjener. Du kjøpte det beste, hvorfor ikke beskytte dem med Fluke-etuier. C25-bærevesken er en slitesterk, glidelås bæreveske med polstring og innvendig lomme, og høy kvalitet polyester eksteriør. Den inkluderer en praktisk håndstropp og bærer de fleste av Flukes populære digitale multimeterne. Vår mest populære sak solgt til dags dato! Nå tilgjengelig i standard- og kamuflasjedesignDimensjoner (HxBxD) 218 mm x 128 mm x 64mm

Non-contact AC voltage detector and LED flashlight combined into one easy to use pen-style design. The LVD2 is a CAT IV 600 V rated non-contact detector that is suitable for commercial and industrial applications. The LVD2 includes dual sensitivity turning blue 1" to 5" (2.54 cm to 12.7 cm) from the source and red when at the source.Dual SensitivityLED light with 100,000 hour lifeDetects from 90 to 600 V ACRated to CAT IV 600 VDual Levels of DetectionBlue indicates proximity to AC Voltage sourceRed indicates you’re at the sourceOperating temperature 0 deg C to 50 deg CUltra-Bright White LED100,000 hr bulbAAA battery included

The Fluke two-pole testers are now more rugged and easier to use than ever before.Fast test results the way you need them, with large, easy-to-use buttons, bright backlights, and clear audible and physical indicators designed for any work situation.Rugged, high-quality construction is built to last. This includes a heavy duty molded case, a thicker cord with wear indicator, sturdy battery case, and well-fitting and durable probe protector.Enhanced ergonomic design feels good in your hand, is easy to use (even with gloves on) and quick, secure probe docking.A complete family of testers with the features, functions, and price/performance to fit your applications and preferences.SpecificationsT90Voltage AC/DC12V - 690VContinuityFrequencyPhase rotation-Resistance measurement-Response Time (LED indicator)200 k input impedance7k input impedance (with load buttons pressed)-Safety rating CAT II 690V CAT III 600VIP rating IP54 SpecificationsPower requirement 2-AA batteriesNet weight 180 g (T90)Size (length, width, height) 23 x 6.5 x 3.8 cm (T90)

En par (rød, svart) av slanke probekropper for å undersøke tett plasserte eller innfelte terminaler. Harde rustfrie stålkrokspisser. Isolert probespiss (designet for å møte GS38-spesifikasjoner for Storbritannia). CAT IV 600 V, CAT III 1000 V, 10 A rating. UL-listet

sikring 803293 - 11A - 1000V - 20kA - 10,3x38,1

Bedre enn en testprobe alene - disse to tommer lange stive bakprobenålene passer lett mellom værforseglingen og ledningen. Et skarpt punkt sikrer god kontakt med elektrisk tilkobling, og pinnens isolasjon beskytter den mot kortslutning til andre ledninger. Glir på testprober som måler 2 mm (0,08 tommer). Testet til 60 V DC

Fluke 4111533 ikke kategorisert

The Fluke T6-600 is an electric multi-tester perfectly adapted to the electrician's daily work. With the built-in fork, measurements of both current and voltage can be made without electrical contact with the measuring object. Fluke FieldSense technology measures voltages of up to 600V AC, which are displayed on the built-in display, without the need for test leads. Current up to 200A is easy measured via the built-in fork. Fluke T6-600 builds on the very popular T5-600, and offers news like resistance measurements up to 1000, frequency measurement, hold function, traditional AC / DC voltage measurements up to 600V, backlit display, etc. As an accessory, Fluke TPAK Magnetic Hanger and Holder H-T6 are available. Tested and approved according to EN61010-1 CAT III 600V. Two year warranty.

Fluke 365 er en robust måler perfekt for jobber der tilgang til ledninger er vanskelig. 365's tynne, lille kjeve kan fjernes med en fleksibel ledning, noe som gjør det lettere enn noen gang å få tilgang til ledninger og se på skjermen. Inkluderte tilbehør: Belagt instruksjonskort Sikkerhetsinformasjonsark Myk bæreveske TL75 testledninger Magnetisk hengende stropp To AA-alkaliske batterier

The Fluke TPAK ToolPakTM Magnetic Meter Hanger allows you to hang your meter on nails, hooks and many other objects so you can take your measurements hands-free. The kit includes powerful magnetic hanger, 9 inch hook and loop strap, a hook hanger and a general purpose hanger. Solves any hanging and positioning problem you may face. Attaches to most Fluke meters.Fluke TPAK ToolPakTM Magnetic Meter Hanger Kit includes:9 inch hook and loop strapUniversal hanger clipHook hanger for non magnetic surfacesStrong magnet

Fluke TL76 2mm/4mm Test Lead SetOne pair (red, black) 1.5 meter long silicone test leads with right angle shrouded banana plugLantern tip (removable) for use with European wall sockets (4 mm Ø )Lantern tip can be removed for easy access to terminal blocks (2 mm Ø)Removable, insulated IC caps allow probing on closely spaced leads and compliance with GS38CAT II 1000 V, 10 A ratingCAT III 1000 V, CAT IV 600V only with protective cap