Elma Instruments Instrumenter - side 6

Røde 100cm kvalitetstestledninger med fast hette, dobbeltisolert høy fleksibel silikon, 0,75 mm2 12A med isolerte stablingsbare 4 mm sikkerhetsbananplugger. Tekniske data: IEC 61010: CAT III 1000V, CAT IV 600V

Testprobe svart = 140mm

The EASYTEST kit, is a combination of a tone transmitter and a inductive trace probe. The trace probe is easy to use and solves problems in searching, identifying and trace cable installations. EASYTEST is able to find insulated cables on distances up to 60 cm, and is able to follow the cables up to 15 km. The instrumentet is able to trace/finding cables, split pairs, pairs, reversed pairs, short curcuits, disconnected leads and more. EASYTEST is an ideal instrument for the telecommunication/network installer tracing a single wirepair, the alarm installer who has to trace the cable route to the alarm system, the electrical installer who has to trace the cabling in a building and more. EASYTEST is used a vary of apllications where it is not possible to find a cable/wire phusical or visual. EASYTEST is even more equipped with two Talk-sets and is therefore able to use two way communication in systems up to 15 km. a very userable feature in places, where it s not possible to use walkie-talkies or mobile phones. Easytest can be conencted via the RJ 11 connector or the supplied crocodile clips. Technical data: Voltage protection: 110V AC/240V DC Range: 15 km Battery transmitter: 1x9V 6F22 (excl.) Battery receiver: 1x9V 6F22 (excl.) Size/weight transmitter: 68 x 96 x 25 mm / 150 g Size/weight receiver: 220 x 40 x 25 mm / 80 g

Testprobe for tilkobling i enden av en testledning med bananstikk. Spesielt egnet for bruk i flerinstallasjonstestere. Tekniske data: IEC 61010: CAT II 1000V (uten beskyttelseshette), CAT IV 600V (med beskyttelseshette)

Standardprobe - Type K Ni-CrNi. Proben leveres med spiraltråd og isolert håndtak. Tekniske data: Måleområde: -50....maks +450°C Størrelse: 130x5 mm

Blå 100cm kvalitetstestledninger med fast hette, dobbeltisolert høy fleksibel silikon, 0,75 mm2 12A med isolerte stablingsbare 4 mm sikkerhetsbananplugger. Tekniske data: IEC 61010: CAT III 1000V, CAT IV 600V

Universell strømadapter for ulike instrumenter.

Trådsensor Type-K for 4mm bananplugger

Sikring 400mA, 6x32mm, 1000V, for: Elma 251sElma 257sElma 319sElma 805sElma 807sElma 878

Med denne smarte magnetiske proben låser testledningen seg automatisk til målepunktet uten bruk av verktøy og uten å løsne klemmer. Passer til 4mm busk på standard 4mm spor. Elma Magnetic Test Probe overholder IEC 61010-1 CAT II 1000V

Kewmate 2012R is the top model in the series of smart pocket multi meters with open current clamp. The instrumentet is offering new functions and is equipped with True RMS measurement, automatical DC zero adjustment on current measurement, and a new and bigger clamp which is able for measuring all up to 120A AC/DC. Kewmate 2012R has a big display which is easy to read on, with analog bargraph, and it measures voltage, current, resistance, continuity, frequency, and is equipped with automatical range selection, data hold, and auto shut off. The instrumentet is in pocket size, and is delivered with a robust rubber protection, where the test leads and the current clamp can be mounted seperately, and then be protected. The instrumentet complies with IEC 61010-1 CAT III 300V, and is delievred with test leads, current clamp, rubber protection, batteries and manual. Technical data: Voltage DC: 0-600m-6-60-600 V Voltage AC: 0-6-60-600 V Current AC/DC: 0,01-60-120.0A (with clamp) Resistance: 0-600-6k-60k-600k-6M-60M Frequency: 0-10-100-1000-10k-100k-1000k-10MHz Capacity: 0-40n-400n-4-40-4000F Clamp size: ø12 mm Max display: 5999 Battery: 2x1,5V LR03 (incl.) Size: 126x87x21 mm Weight: 210 g

Elma Laser 1 er en helt ny mini laser avstandsmåler (LDM), som inneholder mange funksjoner i et lommeformat instrument. Instrumentet er enkelt å betjene og kan beregne areal og volum. Ved hjelp av Bluetooth blir Elma Laser 1 til et smart verktøy for dokumentasjon. Ta et bilde med smarttelefonen eller nettbrettet ditt, og dra raskt og enkelt målingene og kommentarene til bildet i den gratis Elma Link Appen, så kan du dele det via e-post eller andre videreformidlingsapper på enheten din. Elma Laser 1 gjør det raskt å måle romdimensjoner, takhøyde osv. Instrumentet leveres klart til bruk inkludert batterier og bruksanvisning.

Batteripakke 7,2V NiMH oppladbar for Davo-Meg 1002 og Digi-Meg 1003 (produsert etter 1.1.2004 fra serienummer 38401040116)

The Elma DTR-880A is a smart instrument, perfect for measuring and recording temperatures and relative humidity in environments where monitoring of these parameters is vitally important. The DRT-880A has an extra large display and many applications, such as control of temperature and / or relative humidity in homes, offices, computer rooms, storage rooms, hospitals and laboratories, etc. The instrument is equipped with multi display for displaying both alarms, temperature and relative humidity. The instrument has built-in clock and memory for displaying max / min values of temperature and relative humidity, as well as switching between ° C and ° F. The Elm DTR-880A comes complete with battery, table support and wall mount.

Standard 32A CEE-plugg med innebygd fase-/rotasjonsfelttester med LED-indikasjon på riktig/feil installasjon og manglende fase/nøytral/jord. Det perfekte testverktøyet for alle brukere av CEE-plugger

Vanlige testledninger er vanligvis 1-2 meter. Dette er ikke alltid nok. Når du må måle elektrisk kontinuitet i beskyttelses-/jordledninger, trenger du ofte veldig lange testledninger. Elma tilbyr mange forskjellige løsninger med testledninger montert på en praktisk kabeltrommel, som sikrer at det alltid vil være lett å bruke og bruke på riktig lengde. Overholder IEC 61010-1 Cat II 250V. Tekniske data: IEC 61010: CAT II 250V

Kalibrator Elma MS4202 / 0-24mA / 0-10V Produkt beskrivelse: Elma MS 4202 er en lille og håndholdt kalibrator, som både kan arbejde som aktiv og passi...

Elma 2000X is the market's smartest voltage tester. The second generation has improved in several aspects, including smart fastening test pens, with accurate distance between them, so that they fit directly into the wall outlet. The test probes has both 2 and 4mm diameter, which ensures good connection. Elma 2000X has many extra features that makes everyday work easier and safer. The instrument is fully automatic, switching between the different functions and can not fault controlled. - Voltage Test - 2 pole with LED indication 12-690 V AC / DC - Phase indicator - a voltage test indicates phase with LED and audible signal - Phase rotation test - 2-poled 3-phase networks - Continuity test - With LED and audible signal - Built-in lighting - Ideal when working in dark locations - High safety - IEC 61010-1 CAT IV, double insulated, IP 65, EN 61243-3 Class B - Suitable for Laus-work , Elma 2000A is equipped with practical highly flexible cord has a protective cover and is delivered incl. Danish manual and standard batteries. Voltage indication also works without batteries. Technical data: Voltage indication: 12, 24, 50, 120, 230, 400 and 690V AC / DC Test current: <3.5 mA Phase indication: 100-690V AC Continuity test: 000 to 400 k Phase Sequence: 2 pole principle, 200-690V AC Safety: IEC 61010-1 CAT IV 600V, IEC 61243-3, Class B (1000V) Double Insulated, IP 65 Battery: 2x1, 5V LR03 (included) Dimensions: 241x68x28 mm Weight: 230 g

Elma iTest 7400 Installation Tester

Elma 315 humidity/thermometer

CA 703 multimeter Produkt beskrivelse: CA 703 er et smart kompakt multimeter med auto-range. Instrumentet har stort display og måler spænding og strøm...

Elma BM878 er en ekte TRUE RMS CAT IV multimeter med innebygd isolasjonstester. Isolasjonstesteren har fem valgfrie testspenninger og innebygd 200mA ohm (motstand) meter for måling på utjevningsforbindelse. Elma BM878 er utstyrt med en stor opplyst dobbel skjerm og rask analog bargraf. Instrumentet måler sanntids spenning, strøm, frekvens, motstand, kapasitet, dioder, kontinuitet og temperatur. Elma BM878 har mange ekstra funksjoner som maks/min-verdier, datahold-funksjon , automatisk avslåing , automatisk / manuell områdesøking og VFD-funksjon som gjør at instrumentet kan måle sanne verdier etter invertere . Multimeteret overholder EN61010-1 CAT IV 600V og leveres inkludert fjernkontroll , testledninger , batterier , type-k temperaturprobe og manual .

Mini tømmeaggragat R32, 2 kompres, 730W Produkt beskrivelse: VRR-24L-R32 fra Value, er en højt ydende tømmestation, der er anvendelig til mange forske...

ATEX-approved voltage detector non-contact can tell if there is AC voltage present. If there is voltage present it will be indicated with a powerfull and clearly orange light. Volt Stick EX is perfect in controlling of eg.: - Fuses, without takeing them out. - Sockets. - Cables and wires, will find the an opening through the insulation. - Serial connected light chains, here it will find broken lights. Elma Volt Stick EX complies with IEC 1010-1 CAT III 1000V, EX: II 2G EEx ib IIC T4 and Nemko 03ATEX1456 and is delivered incl. manual and batteries. Technical data: Voltage range: 230-1000V AC Batteries: 2x1,5V LR 03 (incl.) Size: 146x 22 mm Weight: 40 g

Elma 3037 is atrue RMS clamp meter in a handy design for easy measuring of AC currents. The instrument has a good resolution down to 10mA, a big backlighted display, smart data hold and automatically zero-adjustment. Elma 3037 has low pass filter and "Inrush" for measuring on start/inrush currents. With the "Volt sense" function you are able to detect the voltage without contact. THe instrument complies with IEC 61010-1 CAT III 600V and is delivered incl. batteries and manual. Technical data:Current AC: 0-60-300AResolution: 0,01-0,1AAccuracy: ±2% + 5 DDisplay: 3 5/6 cifferMax. display: 5999Clamp size: 24 mmBattery: 2x1,5V LR44 (incl.)Size: 147x60x31 mmWeight:100 g