DJI Droner - side 5

Ekspansjonsbasesett, for DJI RS 2

X-Port 3-Axis Gimbal, for Matrice V2

DJI CP.MA.00000703.01 camera drone part Gimbal protection kit

Each propeller blade has been put under precise dynamic balancing tests to increase aerodynamic efficiency and output less noise.

ØKT EFFEKTIVITET
DJI Inspire 3 sammenleggbare hurtigutløsende propeller har blitt testet med presis dynamisk balansering for å øke aerodynamisk effektivitet og produsere mindre støy.

Propeller, for Matrice 30

PROSSD Mount, for DJI Ronin 4D

Foldbar propell (CW) (en pakke 2), for Agras

DJI CP.MA.00000467.01 batterilader Batteri til kameradrone/fjernkontroll AC

Bilstrømadapter, 65 watt, 5 A, PD, 2 utgangskontakter (USB, USB-C), på kabelen: USB-C, for Mavic 3

Bilstrømadapter, for FPV

DJI Ronin 2 Universal Tripod Adapter Stativadapter Sort, Grå 1 stykker

The DJI Ronin 2 C-Stand Bracket is designed to mount onto C-stands with a 5/8" baby pin, allowing you to securely attach the DJI Ronin 2 gimbal.

DJI's Remote Controller for Ronin-M is a dedicated 2.4 GHz handheld transmitter that comes pre-configured for operating the Ronin-M gimbal. With this transmitter, one operator can carry the gimbal while a second operator remotely controls the gimbal's pan, tilt, and roll, allowing for much more precise camera movements than a single operator can achieve.

This remote is designed specifically for the Ronin-M and is not compatible with the Ronin. Please ensure the remote control is sufficiently charged before use, as it will automatically power off if the battery voltage becomes too low. The internal battery should be charged using the included Micro-USB cable, and using the incorrect type of charging cable may cause damage. Always turn off the remote control before charging. The power LED indicator will glow solid green when the battery is fully charged. When using the remote, ensure the antenna is at least 7.9" away from any person.

The key features of the remote controller include an internal battery with USB charging, a power indicator light, LEDs that show the remaining battery, a carry handle, and a neck strap attachment point. The remote is also configurable and updatable with the RC Assistant software.

For controls with default settings, the right 3-position switch is used to select the mode, while the left 3-position switch is used to select the function (Fast, Normal, and Slow). The left dial is reserved, and the right joystick controls the horizontal pan axis and vertical tilt axis. The left joystick controls the roll axis with horizontal movements.

DJI's Remote Controller for Ronin is a dedicated 2.4 GHz handheld transmitter, pre-configured for seamless Ronin gimbal operation. It allows one operator to carry the gimbal while another remotely controls pan, tilt, and roll for more precise camera movements than a single operator could achieve alone.

This remote is specifically designed for use with the Ronin and is not compatible with the Ronin-M. Ensure the remote control is fully charged before use — it will automatically power off if the battery voltage drops too low. The internal battery charges via the included Micro-USB cable, and using an incorrect cable may cause damage. Always turn off the remote before charging; the power LED will glow solid green once the battery is fully charged.

For safe operation, the antenna should remain at least 7.9 inches away from any person while in use.

The controller features an internal battery with USB charging, a power indicator light, LEDs to show remaining battery life, a carry handle, and a neck strap attachment point. It’s also configurable and updatable using DJI's RC Assistant software.

By default, the controls include a right 3-position switch for selecting modes and a left 3-position switch to choose functions like Fast, Normal, or Slow. The right joystick controls pan with horizontal movements and tilt with vertical ones, while the left joystick manages roll horizontally. The left dial is reserved for future use.

Batteri, Li-Ion, 2420 mAh, 35.71 Wh, 7C

Propeller, for Spreading Wings S1000, S900

Folding Propeller Kit, for Agras MG-1

Vibrasjonsdempende brakett for Phantom 3 Professional / Advanced fra DJI er den øverste delen av monteringssettet som brukes til å feste gimbalen til hovedrammen. Som en del av vibrasjonsreduksjonssystemet har den fire steder der vibrasjonsdemperne (tilgjengelig separat) kan festes. Den vil fungere med Phantom 3 Professional og Advanced. Installasjonsskruer er inkludert.

Venstre og høyre armstøtter

Snap-on Top Cover, hvit

Quick Release Propellers for store høyder, for Inspire 2

Racing fremdriftssystem

Ronin Universal Mount Part 38

Pan balansejusteringsstang, for DJI Ronin