DJI Droner - side 3

Whether you want to safely transport your drone to a location or just have it on hand if the mood strikes, the DJI Drone Sling Bag is a great way to keep your gear protected while you're on the go. With a zippered lid opening, you can easily access the contents of the bag while carrying it over your shoulder. Inside are three padded compartments designed for compact drones and accessories, such as the Avata 2. In fact, it can hold the Avata 2, Goggles 3, RC Motion 3 or FPV Remote Controller 3, three flight batteries, a two-way charging hub, and more.

• Additional Features
• Soft-shell exterior
• Mesh pouch inside the lid
• Exterior side pouch
• Adjustable shoulder strap

Dronfjernkontroll, display, LCD, 5.5", RF, for Air 2S; Mavic 3, 3 Classic, 3 Pro; Mini 3

Intelligent flybatteri for DJI Mini 3 Pro-dronen
Det intelligente litiumionbatteriet med en kapasitet på 2453 mAh lar DJI Mini 3 Pro-dronen fly i maksimalt 34 minutter*. Vær forberedt og fly bekymringsfritt.

Passer også til DJI Mini 3.

* Målt ved en konstant hastighet på 21,6 km/t under ingen vindforhold.

MERK! Kun 1 stk. batteri.

Luftfartøy, Bluetooth, Wi-Fi

Each propeller blade has been put under precise dynamic balancing tests to increase aerodynamic efficiency and output less noise.

At the peak of aerial cinematography, DJI Inspire 3 offers unprecedented workflow efficiency, camera language, and creative freedom. This all-in-one 8K camera drone empowers professional-level filmmakers to fully maximize the potential of any shot and master the unseen.

Inspire 3 is a professional camera drone that adopts a fluid new design that takes aerodynamics fully into consideration to reduce air resistance.

The max dive speed has increased from the 9 m/s of Inspire 2 to 10 m/s, while vertical ascend/descend speed has increased from 6 m/s and 4 m/s to 8 m/s.

Powerful maneuverability delivers responsive, accurate control and an extended flight time of up to 28 minutes.

The FPV camera, visual sensors, positioning antennas, and storage card slot all adopt designs that are seamlessly integrated into the airframe for a minimalist look and modern industrial aesthetics.

DJI Goggles N3 - Opplev Immersiv FPV-Flyging

Din inngang til en ny verden av luftige eventyr. Med doble 3,5-tommers 1920×1080 skjermer og et bredt synsfelt på 54°, kan du fordype deg i krystallklare, høyoppløselige bilder. Goggles N3 har O4 videooverføringsteknologi som leverer video med lav forsinkelse opptil 10 km unna. Lett og komfortabel, designet for umiddelbar bruk uten behov for interpupillær justering, og kan brukes over personlige briller. Kompatibel med DJI Neo og DJI Avata 2, løft flygeopplevelsen din til nye høyder.

• Høyoppløselige Skjermer: Doble 1920×1080 skjermer for fantastisk klarhet.
• Bredt Synsfelt: 54° FOV for en immersiv opplevelse.
• O4 Videooverføring: Video med lav forsinkelse opptil 10 km.
• Brukervennlig Design: Ingen behov for interpupillær justering; passer over briller.
• Kompatibel med DJI Neo og Avata 2: Lås opp nye flygemuligheter.

 

The DJI Ronin 2 Top Accessory Mounting Plate features 1/4"-20 mounting holes, allowing you to attach accessories to your DJI Ronin 2 gimbal. The plate is designed to combine with the DJI Ronin 2 Camera Top Cross Bar (sold separately) and can be mounted together with the Cross Bar to both the camera and the gimbal.

Batteri til DJI - Neo.

The DJI 240 W Power Adapter (EU) is a charger for the DJI Mavic 4 Pro drone. With 240 W of power, you can charge your drone particularly quickly. This adapter is only suitable for the DJI Mavic 4 Pro.

Fjernkontrollpinner

Overview
The DJI Mavic 3 Fly More Kit includes two Intelligent Flight Batteries, a 100W Battery Charging Hub, a 65W Car Charger, a Convertible Carrying Bag, and Low-Noise Propellers, providing comprehensive support for your aerial photography experience at a better price than buying these items separately.


1. Intelligent Flight Battery: One Intelligent Flight Battery provides a 46-min* max flight time, allowing you to explore more of your surroundings and fly with greater peace of mind.

2. 100W Battery Charging Hub: Expands the charging interface to three. The battery charging hub enhances efficiency by charging batteries in sequence according to their remaining power level, with more fully-charged batteries receiving power first.

3. 65W Car Charger: A must-have on the go, the 65W Car Charger can charge different devices in the car. It provides a stable output power of 65 W and two output ports (USB-C and USB-A) for charging the Intelligent Flight Battery and remote controller at the same time. It also supports PPS and PD protocols to charge your smartphone, laptop, and other devices.

4. Low-Noise Propellers: Each propeller blade has been put under precise dynamic balancing tests to increase aerodynamic efficiency and output less noise.

5. Convertible Carrying Bag: This well-designed bag can be used as either a shoulder bag or a backpack to meet your needs for short trips.

DJI Neo's toveis ladestasjon kan lade tre batterier samtidig, noe som øker både ladehastigheten og effektiviteten.

Inkluderer en erstatningslinse, et fjerningsverktøy, en linserengjøringsklut, en linseluftblåser, en rengjøringsbørste og mer. Den gamle linsen kan enkelt byttes ut selv. Det er ikke nødvendig å sende den inn til reparasjon.

DJI O4 Air Unit Pro overføringsmodul sikrer ultra-lav latens og høy videokvalitet, med støtte for opptil 15 km rekkevidde gjennom sitt dual-antenne-design. Den leverer 1080p/100fps livevisning, 15 ms latens og en bitrate på 60 Mbps for jevn og responsiv kontroll. Lett og kompakt, ideell for FPV-piloter som søker pålitelig ytelse.

DJI Video Receiver
The DJI Video Receiver is compatible with the DJI Video Transmitter and is ideal for use on film sets. If you use it in conjunction with a film camera such as ARRI or RED, you can conveniently transmit metadata and output video signals with a fractional number of frames per second. The device supports the O3 Pro system, allowing for 1080p/60FPS image transmission up to 4 km. In addition, you can connect an unlimited number of receivers to your transmitter (in Broadcast mode). DJI Video Receiver is also compatible with DJI Master Wheels. Note: DJI Video Transmitter is required to use the DJI Video Receiver.

Almost Unlimited Possibilities
The receiver supports metadata transmission via SDI, which means you can conveniently transmit file names, time codes, camera settings to monitors and QTAKE. The DJI Video Receiver also allows for real-time voice calls (one-on-one), facilitating communication between the operator and director. The device also offers 2 modes of operation. Broadcast mode allows you to connect an unlimited number of receivers to your transmitter, allowing multiple teams to efficiently monitor work on the film set. Control mode, on the other hand, is suitable for remote control of Ronin 2, DJI RS 3 Pro, and camera focus.

In the box
DJI Video Receiver
NP-F battery adapter
WB37 battery adapter
Ronin x2 video transmission antenna
USB-C cable
SDI cable
DC power cable to P-TAP
Mounting kit

Inkluderer et erstatningsobjektiv, sugekopp til objektivet, rengjøringsklut til objektivet og hansker.

DJI WB37 charging hub (USB-C)
The hub allows you to charge up to 2 batteries simultaneously. It supports 65W PD fast charging, and charging time depends on the voltage of the selected charger (not included).

Quick Release Propellers for store høyder, for Inspire 2

Foldbar propell (CW) (en pakke 2), for Agras

Bilstrømadapter, for FPV

Upward Gimbal Connector

DJI's Remote Controller for Ronin-M is a dedicated 2.4 GHz handheld transmitter that comes pre-configured for operating the Ronin-M gimbal. With this transmitter, one operator can carry the gimbal while a second operator remotely controls the gimbal's pan, tilt, and roll, allowing for much more precise camera movements than a single operator can achieve.

This remote is designed specifically for the Ronin-M and is not compatible with the Ronin. Please ensure the remote control is sufficiently charged before use, as it will automatically power off if the battery voltage becomes too low. The internal battery should be charged using the included Micro-USB cable, and using the incorrect type of charging cable may cause damage. Always turn off the remote control before charging. The power LED indicator will glow solid green when the battery is fully charged. When using the remote, ensure the antenna is at least 7.9" away from any person.

The key features of the remote controller include an internal battery with USB charging, a power indicator light, LEDs that show the remaining battery, a carry handle, and a neck strap attachment point. The remote is also configurable and updatable with the RC Assistant software.

For controls with default settings, the right 3-position switch is used to select the mode, while the left 3-position switch is used to select the function (Fast, Normal, and Slow). The left dial is reserved, and the right joystick controls the horizontal pan axis and vertical tilt axis. The left joystick controls the roll axis with horizontal movements.

DJI CP.MA.00000703.01 camera drone part Gimbal protection kit

Fjernkontroll Monitor Hette, for Inspire 1, 1 Professional; Phantom 3 Advanced, 3 Professional, 4