Philips Drivere, spoler og transformatorer

An energy-efficient solutionHF-Performer III TL5 is a slim and high-frequency electronic ballast for TL5 and TL5 Eco fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF-Performer III range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2 BAT). Product Features • Robust design for 100,000 hours lifetime at Ta = 50 C and over 100,000 on/off switching operations on one lamp • Programmed, flicker-free, pre-heated start (< 0.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections • The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring. Product Benefits • Optimal savings can be achieved using HF-PIII together with TL5 ECO lamps (system solution). • The programmed start enables the lamp to be switched on and off without reducing useful lamp life. • DC emergency operation in line with IEC/EN 60598-22 luminaire norms • Suitable for luminaires in protection class I and, after testing, class IIApplications • Used with movement-detection control systems like Philips OccuPlus • Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools • Class I outdoor applications, e. g. industrial premises and parking lot

Digitale tenningssystemer for maksimal pålitelighet HID-tenningssystemer for seriekretser Fordeler med produktet • Enkel installasjon og kabling • Kan brukes med både semi-parallelle og serie ballaster • Digitale tenningssystemer sikrer maksimal pålitelighet Produktfunksjoner • Tennere utstyrt med skruterminalblokker som standard • Serie tennere vil bare fungere i seriekretser Applikasjoner • Utendørs belysning (mest populære applikasjon: vei- og tunnelbelysning) System • Elektromagnetisk system krever ballast, tenningsenhet og kondensator • Designet for å fungere bare i seriekretser • Ingen tenningsenhet er nødvendig for SON-I-lamper

Robust design, compact formHF-Matchbox Red is an affordable, reliable, compact, lightweight and high-frequency ballast for use with system wattages below 25 W in combination with TL mini, TL-D, TL5 and TL5c, PL-T/C, and PL-L/S lamps. The HF-M Red range has a robust design, meets all relevant international safety and performance standards and has an energy efficiency index (CELMA EEI) of A2. Product Benefits • Can be operated with movement-detection control systems. • Automatic restart (after voltage dip or lamp exchange) ensures easy operation and hassle-free re-lamping. • Suitable for use in class I or class II luminairesProduct Features • Over 60,000 on/off switches on one lamp (depending on lamp/ballast combination) • Suitable for emergency DC operation between 190 and 254 V • Programmed, flicker-free, pre-heated start (<0.8 s) which allows the lamp to be switched on and off without reducing useful lamp lifeApplication • Used with movement-detection control systems like Philips OccuPlus • Mainly for indoor applications such as spotlights, downlights, light boxes, and emergency and security fixtures used largely in retail stores, office buildings, hotels, private homes and residential buildings • Domestic applications such as outdoor garden lighting, garage areas, stairways

An energy-efficient solutionHF-Performer III TL-D is a slim and high-frequency electronic ballast for TL-D fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF-Performer III range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2 BAT). Product Features • Robust design for 100,000 hours lifetime at Ta = 50 C and over 100,000 on/off switching operations on one lamp • Programmed, flicker-free, pre-heated start (< 0.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections. Product Benefits • The programmed start enables the lamp to be switched on and off without reducing useful lamp life. • DC emergency operation in line with IEC/EN 60598-22 luminaire norms • Smart power ensures constant light, irrespective of mains-voltage fluctuations • Suitable for luminaires in protection class I and, after testing, class II • The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring. Application • Used with movement-detection control systems like Philips OccuPlus • Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools • Class I outdoor applications, e. g. industrial premises and parking lots

HF-Regulator II for TL-D lamps – Dimming: a next step in energy savingHigh-frequency electronic dimming ballast, using the analog protocol (1-10 V) for TL-D lampsProduct Benefits • The lamp power can be dimmed from 1 to 100% via the Analog control input (in accordance with the 1-10 V industry standard) • Compliant with European and Asian norms and suitable for emergency lighting systems • HF operation improves light quality, lamp lifetime • Combined with controls, additional energy savings can be achievedProduct Features • Programmed start: flicker-free ignition < 0.5 seconds and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life • Smart power ensures constant light, independent of mains fluctuations. • Up to 60% reduction in energy consumption by using automatic lighting control systems • Stop circuit is activated within 5 seconds in the event of lamp failure (safety stop), and ballast resets automatically after lamp replacementApplications • Indoor, general and task lighting applications in combination with lighting control systems (personal control, daylight linking and/or movement detection)

HF-Performer Intelligent for Master and ECO TL5 HE/HO, TL-D and PL-L lamps. HF-Performer Intelligent har automatisk gjenkjenning av den tilkoblede lampen og er uavhengig i stand til å justere driftsparametrene nøyaktig til den respektive lampen. Dette gir en betydelig fordel, spesielt for T5-lamper, da det betyr at TL5 HE og HO-lamper med samme lengde kan byttes ut. Med et valg av syv ballaster kan kunden håndtere effektivt alle mulige kombinasjoner av Master TL5 og Eco-, TL-D- og PL-L-lamper.

Dimming the next step in energy savingThis intelligent high-frequency electronic dimming ballast utilizes the DALI or Touch and Dim push-button protocol for fluorescent lamps. It meets A1BAT requirements, thereby pre-empting upcoming legislation. With a special command you can retrieve the system’s mains power consumption, and with another you can find out which lamp wattage is connected. Combined with controls, additional energy savings can be achieved. Product Benefits • Extremely low stand-by losses, controlled cut-off for dim levels above 80%, hybrid control dimming (current control at 100% and power control at 1%) – combined with MASTER TL5 Eco the most energy-efficient solution • HF operation improves light quality and lamp lifetime. • Compliant with European and Asian norms and suitable for emergency lighting systemsProduct Features • HF-R Intelligent recognizes what type of lamp (T5 HE, HO, ECO, TL-D, PL-L) is connected and drives it accordingly • Programmed start: flicker-free ignition < 1.0 second and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life • Smart power ensures constant light, independent of mains fluctuations and dimming from 1 to 100% • Stop circuit is activated within 5 seconds in the event of lamp failure (safety stop), and ballast resets automatically after lamp replacement • Programmable for intelligent functionalities via Philips MultiOne: Corridor mode, Emergency DC dim level, Burn-in timeEnvironment • The HF-R intelligent will recognize which lamp is connected and will drive it accordingly • Extremely low energy consumption in stand-by (0.25 W) • Optimized for MASTER TL5 Eco lamps • RoHS and ISO 14000-compliant • EEI = A1 BAT (Best available technology)Application • Indoor, general and task lighting applications in combination with lighting control systems (personal con

An energy-efficient solutionHF-Performer III TL5 is a slim and high-frequency electronic ballast for TL5 and TL5 Eco fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF-Performer III range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2 BAT). Product Features • Robust design for 100,000 hours lifetime at Ta = 50 C and over 100,000 on/off switching operations on one lamp • Programmed, flicker-free, pre-heated start (< 0.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections • The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring. Product Benefits • Optimal savings can be achieved using HF-PIII together with TL5 ECO lamps (system solution). • The programmed start enables the lamp to be switched on and off without reducing useful lamp life. • DC emergency operation in line with IEC/EN 60598-22 luminaire norms • Suitable for luminaires in protection class I and, after testing, class IIApplications • Used with movement-detection control systems like Philips OccuPlus • Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools • Class I outdoor applications, e. g. industrial premises and parking lot

Robust design, compact formHF-Matchbox Red is an affordable, reliable, compact, lightweight and high-frequency ballast for use with system wattages below 25 W in combination with TL mini, TL-D, TL5 and TL5c, PL-T/C, and PL-L/S lamps. The HF-M Red range has a robust design, meets all relevant international safety and performance standards and has an energy efficiency index (CELMA EEI) of A2. Product Benefits • Can be operated with movement-detection control systems. • Automatic restart (after voltage dip or lamp exchange) ensures easy operation and hassle-free re-lamping. • Suitable for use in class I or class II luminairesProduct Features • Over 60,000 on/off switches on one lamp (depending on lamp/ballast combination) • Suitable for emergency DC operation between 190 and 254 V • Programmed, flicker-free, pre-heated start (<0.8 s) which allows the lamp to be switched on and off without reducing useful lamp lifeApplication • Used with movement-detection control systems like Philips OccuPlus • Mainly for indoor applications such as spotlights, downlights, light boxes, and emergency and security fixtures used largely in retail stores, office buildings, hotels, private homes and residential buildings • Domestic applications such as outdoor garden lighting, garage areas, stairways

An energy-efficient solutionHF-Performer III TL5 is a slim and high-frequency electronic ballast for TL5 and TL5 Eco fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF-Performer III range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2 BAT). Product Features • Robust design for 100,000 hours lifetime at Ta = 50 C and over 100,000 on/off switching operations on one lamp • Programmed, flicker-free, pre-heated start (< 0.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections • The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring. Product Benefits • Optimal savings can be achieved using HF-PIII together with TL5 ECO lamps (system solution). • The programmed start enables the lamp to be switched on and off without reducing useful lamp life. • DC emergency operation in line with IEC/EN 60598-22 luminaire norms • Suitable for luminaires in protection class I and, after testing, class IIApplications • Used with movement-detection control systems like Philips OccuPlus • Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools • Class I outdoor applications, e. g. industrial premises and parking lot

An energy-efficient solutionHF-Performer III TL5 is a slim and high-frequency electronic ballast for TL5 and TL5 Eco fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF-Performer III range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2 BAT). Product Features • Robust design for 100,000 hours lifetime at Ta = 50 C and over 100,000 on/off switching operations on one lamp • Programmed, flicker-free, pre-heated start (< 0.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections • The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring. Product Benefits • Optimal savings can be achieved using HF-PIII together with TL5 ECO lamps (system solution). • The programmed start enables the lamp to be switched on and off without reducing useful lamp life. • DC emergency operation in line with IEC/EN 60598-22 luminaire norms • Suitable for luminaires in protection class I and, after testing, class IIApplications • Used with movement-detection control systems like Philips OccuPlus • Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools • Class I outdoor applications, e. g. industrial premises and parking lot

Robust design, compact formHF-Matchbox Red is an affordable, reliable, compact, lightweight and high-frequency ballast for use with system wattages below 25 W in combination with TL mini, TL-D, TL5 and TL5c, PL-T/C, and PL-L/S lamps. The HF-M Red range has a robust design, meets all relevant international safety and performance standards and has an energy efficiency index (CELMA EEI) of A2. Product Benefits • Can be operated with movement-detection control systems. • Automatic restart (after voltage dip or lamp exchange) ensures easy operation and hassle-free re-lamping. • Suitable for use in class I or class II luminairesProduct Features • Over 60,000 on/off switches on one lamp (depending on lamp/ballast combination) • Suitable for emergency DC operation between 190 and 254 V • Programmed, flicker-free, pre-heated start (<0.8 s) which allows the lamp to be switched on and off without reducing useful lamp lifeApplication • Used with movement-detection control systems like Philips OccuPlus • Mainly for indoor applications such as spotlights, downlights, light boxes, and emergency and security fixtures used largely in retail stores, office buildings, hotels, private homes and residential buildings • Domestic applications such as outdoor garden lighting, garage areas, stairways

Philips 913700648666 ikke kategorisert

HF-Regulator II for TL-D lamps – Dimming: a next step in energy savingHigh-frequency electronic dimming ballast, using the analog protocol (1-10 V) for TL-D lampsProduct Benefits • The lamp power can be dimmed from 1 to 100% via the Analog control input (in accordance with the 1-10 V industry standard) • Compliant with European and Asian norms and suitable for emergency lighting systems • HF operation improves light quality, lamp lifetime • Combined with controls, additional energy savings can be achievedProduct Features • Programmed start: flicker-free ignition < 0.5 seconds and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life • Smart power ensures constant light, independent of mains fluctuations. • Up to 60% reduction in energy consumption by using automatic lighting control systems • Stop circuit is activated within 5 seconds in the event of lamp failure (safety stop), and ballast resets automatically after lamp replacementApplications • Indoor, general and task lighting applications in combination with lighting control systems (personal control, daylight linking and/or movement detection)

Dimming the next step in energy savingThis intelligent high-frequency electronic dimming ballast utilizes the DALI or Touch and Dim push-button protocol for fluorescent lamps. It meets A1BAT requirements, thereby pre-empting upcoming legislation. With a special command you can retrieve the system’s mains power consumption, and with another you can find out which lamp wattage is connected. Combined with controls, additional energy savings can be achieved. Product Benefits • Extremely low stand-by losses, controlled cut-off for dim levels above 80%, hybrid control dimming (current control at 100% and power control at 1%) – combined with MASTER TL5 Eco the most energy-efficient solution • HF operation improves light quality and lamp lifetime. • Compliant with European and Asian norms and suitable for emergency lighting systemsProduct Features • HF-R Intelligent recognizes what type of lamp (T5 HE, HO, ECO, TL-D, PL-L) is connected and drives it accordingly • Programmed start: flicker-free ignition < 1.0 second and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life • Smart power ensures constant light, independent of mains fluctuations and dimming from 1 to 100% • Stop circuit is activated within 5 seconds in the event of lamp failure (safety stop), and ballast resets automatically after lamp replacement • Programmable for intelligent functionalities via Philips MultiOne: Corridor mode, Emergency DC dim level, Burn-in timeEnvironment • The HF-R intelligent will recognize which lamp is connected and will drive it accordingly • Extremely low energy consumption in stand-by (0.25 W) • Optimized for MASTER TL5 Eco lamps • RoHS and ISO 14000-compliant • EEI = A1 BAT (Best available technology)Application • Indoor, general and task lighting applications in combination with lighting control systems (personal con

High quality and robust performanceHigh-quality, compact and lightweight HID electronic gear for optimal and reliable performance of 20, 35, 50 and 70 W CDM lampsProduct Features • Minimal lamp power spread • Low gear energy losses • Lamp end-of-life detection • High Tambient and Tcase temperatures • Long lifetime of 40,000 hours Product Benefits • Optimal lamp performance thanks to minimal lamp power tolerance • CDM lamp life increased by up to 30% • Eliminates all visible lamp flickerApplications • Accent and decorative lighting for shops, public spaces, lobbies and offices • Suitable for indoor use only

HF-Regulator II for TL-D lamps – Dimming: a next step in energy savingHigh-frequency electronic dimming ballast, using the analog protocol (1-10 V) for TL-D lampsProduct Benefits • The lamp power can be dimmed from 1 to 100% via the Analog control input (in accordance with the 1-10 V industry standard) • Compliant with European and Asian norms and suitable for emergency lighting systems • HF operation improves light quality, lamp lifetime • Combined with controls, additional energy savings can be achievedProduct Features • Programmed start: flicker-free ignition < 0.5 seconds and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life • Smart power ensures constant light, independent of mains fluctuations. • Up to 60% reduction in energy consumption by using automatic lighting control systems • Stop circuit is activated within 5 seconds in the event of lamp failure (safety stop), and ballast resets automatically after lamp replacementApplications • Indoor, general and task lighting applications in combination with lighting control systems (personal control, daylight linking and/or movement detection)

An energy-efficient solutionHF-Performer III TL-D is a slim and high-frequency electronic ballast for TL-D fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF-Performer III range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2 BAT). Product Features • Robust design for 100,000 hours lifetime at Ta = 50 C and over 100,000 on/off switching operations on one lamp • Programmed, flicker-free, pre-heated start (< 0.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections. Product Benefits • The programmed start enables the lamp to be switched on and off without reducing useful lamp life. • DC emergency operation in line with IEC/EN 60598-22 luminaire norms • Smart power ensures constant light, irrespective of mains-voltage fluctuations • Suitable for luminaires in protection class I and, after testing, class II • The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring. Application • Used with movement-detection control systems like Philips OccuPlus • Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools • Class I outdoor applications, e. g. industrial premises and parking lots

An energy-efficient solutionHF-Performer III TL-D is a slim and high-frequency electronic ballast for TL-D fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF-Performer III range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2 BAT). Product Features • Robust design for 100,000 hours lifetime at Ta = 50 C and over 100,000 on/off switching operations on one lamp • Programmed, flicker-free, pre-heated start (< 0.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections. Product Benefits • The programmed start enables the lamp to be switched on and off without reducing useful lamp life. • DC emergency operation in line with IEC/EN 60598-22 luminaire norms • Smart power ensures constant light, irrespective of mains-voltage fluctuations • Suitable for luminaires in protection class I and, after testing, class II • The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring. Application • Used with movement-detection control systems like Philips OccuPlus • Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools • Class I outdoor applications, e. g. industrial premises and parking lots

An energy-efficient solutionHF-Performer EII PL-T/C/R/T5c is a slim and high-frequency electronic ballast for a wide range of CFL- ni applications. It is ideal for applications where high energy efficiency is required. The HF-Performer EII range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2). Product Benefits • Robust design that meets all relevant international safety and performance standards and ensures good energy efficiency • Automatic restart (after voltage dip or lamp exchange) ensures easy operation and hassle-free re-lamping • Suitable for DC emergency operation, 186 to 275 V (at -10 oC) and in line with IEC/EN 60598-22 luminaire normsProduct Features • 50,000-hour lifetime at maximum case temperature, combined with over 60,000 on/off switches on one lamp • Programmed, flicker-free, pre-heated start (< 1.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections. Applications • Ideal for commercial indoor lighting applications where it is necessary to reduce the wattage per square meter or operating costs • Used with movement-detection control systems like Philips OccuPlus • Mainly for indoor applications such as spotlights, downlights and recessed fixtures used largely in retail stores, office buildings, supermarkets, hotels, convenience stores • Industrial premises with long operating hours

For flexibility in luminaire design and stock-keeping managementHF-Performer Intelligent for Master and ECO TL5 HE/HO, TL-D and PL-L lampsHF-Performer Intelligent features automatic recognition of the connected lamp and is independently able to adjust its operation parameters exactly to the respective lamp. This results in a substantial benefit, especially for T5 lamps, as it means TL5 HE and HO lamps of the same length can be interchanged. With a choice of seven ballasts, the customer is able to handle efficiently every possible combination of Master TL5 and Eco, TL-D, and PL-L lamps. Product Benefits • Maximum reliability in system operation, and flexibility for designers, operators and facility managers in terms of stock-keeping management • Multi-power technology for precise operation of multiple lamp types of various wattages • Optimized for high maintenance efficiency and reliability: 5-year warrantyProduct Features • Highest CELMA Energy Efficiency I

HF-Regulator II for TL-D lamps – Dimming: a next step in energy savingHigh-frequency electronic dimming ballast, using the analog protocol (1-10 V) for TL-D lampsProduct Benefits • The lamp power can be dimmed from 1 to 100% via the Analog control input (in accordance with the 1-10 V industry standard) • Compliant with European and Asian norms and suitable for emergency lighting systems • HF operation improves light quality, lamp lifetime • Combined with controls, additional energy savings can be achievedProduct Features • Programmed start: flicker-free ignition < 0.5 seconds and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life • Smart power ensures constant light, independent of mains fluctuations. • Up to 60% reduction in energy consumption by using automatic lighting control systems • Stop circuit is activated within 5 seconds in the event of lamp failure (safety stop), and ballast resets automatically after lamp replacementApplications • Indoor, general and task lighting applications in combination with lighting control systems (personal control, daylight linking and/or movement detection)

Robust design, compact formHF-Matchbox Red is an affordable, reliable, compact, lightweight and high-frequency ballast for use with system wattages below 25 W in combination with TL mini, TL-D, TL5 and TL5c, PL-T/C, and PL-L/S lamps. The HF-M Red range has a robust design, meets all relevant international safety and performance standards and has an energy efficiency index (CELMA EEI) of A2. Product Benefits • Can be operated with movement-detection control systems. • Automatic restart (after voltage dip or lamp exchange) ensures easy operation and hassle-free re-lamping. • Suitable for use in class I or class II luminairesProduct Features • Over 60,000 on/off switches on one lamp (depending on lamp/ballast combination) • Suitable for emergency DC operation between 190 and 254 V • Programmed, flicker-free, pre-heated start (<0.8 s) which allows the lamp to be switched on and off without reducing useful lamp lifeApplication • Used with movement-detection control systems like Philips OccuPlus • Mainly for indoor applications such as spotlights, downlights, light boxes, and emergency and security fixtures used largely in retail stores, office buildings, hotels, private homes and residential buildings • Domestic applications such as outdoor garden lighting, garage areas, stairways

An energy-efficient solutionHF-Performer EII PL-T/C/R/T5c is a slim and high-frequency electronic ballast for a wide range of CFL- ni applications. It is ideal for applications where high energy efficiency is required. The HF-Performer EII range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2). Product Benefits • Robust design that meets all relevant international safety and performance standards and ensures good energy efficiency • Automatic restart (after voltage dip or lamp exchange) ensures easy operation and hassle-free re-lamping • Suitable for DC emergency operation, 186 to 275 V (at -10 oC) and in line with IEC/EN 60598-22 luminaire normsProduct Features • 50,000-hour lifetime at maximum case temperature, combined with over 60,000 on/off switches on one lamp • Programmed, flicker-free, pre-heated start (< 1.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections. Applications • Ideal for commercial indoor lighting applications where it is necessary to reduce the wattage per square meter or operating costs • Used with movement-detection control systems like Philips OccuPlus • Mainly for indoor applications such as spotlights, downlights and recessed fixtures used largely in retail stores, office buildings, supermarkets, hotels, convenience stores • Industrial premises with long operating hours