Unidrain Dreneringsprodukter - side 2

Highline-ramme - Børstet stål 700/10 mm

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

HighLine Panel, Cassette or Custom must be selected.

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Ramme Unidrain 1500 700X12 mm.

Consists of 4 wooden profiles that are screwed into the wooden joists. The drain unit is inserted into the profile and “clicks” into place.Ensures correct positioning and fixing of the drain unit in wooden floor joist structures. Adjusted to the correct length by cutting the wooden profile.

Ramme unidrain 1500 900X12 T/1001.

Ramme Unidrain 1500 900X8 mm.

Ramme Unidrain 1500 800X12 mm.

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile). The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor.

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Complete floor drain against rear wall 1000 mm, 10 mm frame, Column grate, 75 mm vertical outlet housing

Meets capacity and self-cleaning requirements according to EN 1253 (the pan-European standard for floor drains) and is VA-approved. The water trap can easily be removed from the outlet unit using the mounted hook. Then dismantle and clean the water trap.

Inkl. avtakbar vannfelle (kan skilles og rengjøres). 180° reversibel når bakoverløp er nødvendig.

Ø 50-mm vertical drain.

Excluding odour barrier.

Rist Unidrain kolonne med dimensjoner på 1602 x 800 mm.

Fit between the drain unit and the outlet unit. Can be used to correct the position of an outlet unit that is too low. 1 x Ø 40-mm side inlet (opened as needed). Not suitable for use with odor barrier 2821.0030.

– If you install water trap 2821.0020 do not turn the side inlet more than 10 degrees away from the center position. Otherwise you will not be able to lift up the water trap for cleaning.

Rist Unidrain kolonne 1602 er 700 mm.

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile). The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor.

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile). The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor.

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile). The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor.

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

For shower cubicles without fixed walls.

The drain unit has four floor flanges.

Including four heght-adjustable feet (40-190 mm).

The grating is placed on a countersunk bearing in the frame, to hold it securely.

Only for use with ClassicLine frame.

Rist Unidrain stripe med en lengde på 1605 og bredde på 700 mm.

Hjørnearmatur Unidrain 2011.

Utløpsenhet | linje | Ø 75 mm vertikal, inkl. vannfelle

75 mm vertical drain.

Rist Unidrain kolonne 1602 måler 1200 mm.