Danfoss - side 9 - Kvalitet til konkurransedyktige priser

Danfoss mtcv thermometer

Thermometer a / b w / dip pocket

308,00 kr (246,40 kr)

Fjernlager, 2-4 dager til forsendelse

Danfoss msv-f2 manual presetting valves

Danfoss 003Z4003 VVS-kobling

1 509,00 kr (1 207,20 kr)

Fjernlager, 3-5 dager til forsendelse

Danfoss msv-f2 manual presetting valves

Danfoss 003Z4004 VVS-kobling

1 975,00 kr (1 580,00 kr)

Fjernlager, 3-5 dager til forsendelse

Danfoss insulation cap for msv-bd leno dn50

Danfoss isolasjonslokk for MSV-BD Leno DN50. Dette EPP-isolasjonslokket har klikk-på-funksjon for rask og enkel montering på ventilen. Det er egnet for temperaturer opptil 120oC.

456,00 kr (364,80 kr)

Fjernlager, 2-4 dager til forsendelse

Danfoss icon ir wireless display thermostat

For de som ønsker å sette ønsket temperatur, se gjeldende temperatur og kontrollere gulvoverflatetemperaturen. Funksjoner trådløse displaytermostater• Infrarød gulvtemperaturensor• Temperaturområdebegrensning• Trådløs toveis kommunikasjon• Berøringskontrollskjerm• Ikonbasert navigering• Støyfri bryting.• Batteridrevet (2 x 1,5V)

1 776,00 kr (1 420,80 kr)

Fjernlager, 2-4 dager til forsendelse

Danfoss RA 5065 sensor element 0-5 with capillary tube

Danfoss RA 5065 termostat. Danfoss tilbyr et komplett utvalg av robust konstruerte sensorer og ventiler, egnet for praktisk talt alle typer radiator-/konvektorvarmesystemer og installasjoner.

1 245,00 kr (996,00 kr)

Fjernlager, 3-5 dager til forsendelse

Danfoss RA 5062 sensor element 0-2 with capillary tube

Danfoss RA 5062 termostat. Danfoss tilbyr et komplett utvalg av robust konstruerte sensorer og ventiler, egnet for praktisk talt alle typer radiator-/konvektorvarmesystemer og installasjoner.

1 184,00 kr (947,20 kr)

Fjernlager, 3-5 dager til forsendelse

Danfoss RA-N 25 valve housing straight 1"

Danfoss RA-N ventil. Danfoss radiatorventiler med forhåndsinnstilling brukes i to-rørs vannbaserte varmesystemer for å sikre optimal distribusjon av vannet i et varmesystem. Forhåndsinnstillingsventiler er tilgjengelige for normal og lav strømning, samt reversert strøm

509,00 kr (407,20 kr)

Fjernlager, 3-5 dager til forsendelse

Danfoss RA-DV 15 dynamic radiator valve angled 1/2"

Danfoss RA-DV dynamisk ventil. Danfoss Dynamic Valve er en innovativ radiatorventil med en 2-i-1 ventil design. Den kombinerer en termostatisk radiatorventil og en differenstrykkontroller for nøyaktig temperaturkontroll og automatisk hydraulisk balansering

313,00 kr (250,40 kr)

Fjernlager, 2-4 dager til forsendelse

Danfoss compression fittings

Danfoss kompresjonskoblinger. Koplinger, RA 15/6T, RA 15/6TB, RLV-K, RLV-KD, RLV-KS, RA-C 15, Manifold CFD.

102,00 kr (81,60 kr)

Fjernlager, 2-4 dager til forsendelse

Danfoss RA-G 20 valve housing angular running 3/4"

Danfoss RA-G ventil. De høykapasitetsventilene, type RA-G, brukes primært i en-rørs systemer. Alle RA-G ventiler kan kombineres med alle termostatiske sensorer i RA-serien.

542,00 kr (433,60 kr)

Fjernlager, 3-5 dager til forsendelse

Danfoss RA 2000 tool set

Verktøysett (for Allen-skruer og tyverisikringsenhet, RA 2000)

266,00 kr (212,80 kr)

Fjernlager, 3-5 dager til forsendelse

Danfoss RA-U 10 valve body straight 3/8"

Danfoss RA-U valve. Danfoss radiator valves with pre-setting are used in two-pipe water based heating systems to ensure optimum distribution of the water in a heating system. Pre-setting valves are available for normal and low flows and for reversed flow

304,00 kr (243,20 kr)

Fjernlager, 3-5 dager til forsendelse

Danfoss tpone-b room thermostat

TPOne-B, batteridrevet elektronisk programmerbar romtermostat.

1 504,00 kr (1 203,20 kr)

Fjernlager, 2-4 dager til forsendelse

Danfoss fhf-ea end section automatic

Avslutning – Endestykker, braketter og andre tilbehør for FHF manifold-serien. Endestykke med automatisk luftventil.

203,00 kr (162,40 kr)

Fjernlager, 3-5 dager til forsendelse

Danfoss RA-UR10 valve housing angular 3/8"

Danfoss RA-UR ventil. Danfoss radiatorventiler med forhåndsinnstilling brukes i to-rørs vannbaserte varmesystemer for å sikre optimal distribusjon av vannet i et varmesystem. Forhåndsinnstillingsventiler er tilgjengelige for normal og lav strømning, samt reversert flyt

369,00 kr (295,20 kr)

Fjernlager, 3-5 dager til forsendelse

Danfoss compression fittings

Danfoss kompresjonskoblinger. Koplinger, RA 15/6T, RA 15/6TB, RLV-K, RLV-KD, RLV-KS, RA-C 15, Manifold CFD.

111,00 kr (88,80 kr)

Fjernlager, 3-5 dager til forsendelse

Danfoss floor heating manifold 11+11 SSM

Danfoss SSM underfloor heating manifold in stainless steel with output for 11 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

4 900,00 kr (3 920,00 kr)

Fjernlager, 2-4 dager til forsendelse

Danfoss floor heating manifold 2+2 SSM

Danfoss SSM underfloor heating manifold in stainless steel with output for 2 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

1 462,00 kr (1 169,60 kr)

Fjernlager, 2-4 dager til forsendelse

Danfoss floor heating manifold 5+5 SSM

Danfoss SSM underfloor heating manifold in stainless steel with output for 5 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

2 428,00 kr (1 942,40 kr)

Fjernlager, 2-4 dager til forsendelse

Danfoss floor heating manifold 6+6 SSM

Danfoss SSM underfloor heating manifold in stainless steel with output for 6 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

2 816,00 kr (2 252,80 kr)

Fjernlager, 2-4 dager til forsendelse

Danfoss insulation cap for MSV-BD Leno DN32

Danfoss insulation cap for MSV-BD Leno DN32This EPP insulation cap offers click-on feature for fast and easy mounting on the valve. It is suitable for temperatures up to 120oC.

301,00 kr (240,80 kr)

Fjernlager, 2-4 dager til forsendelse

Danfoss Aveo RA institutional sensor built-in sensor

Danfoss Aveo Institutional sensor element with built-in sensor. Setting range 7-28°C, Frost protection.

389,00 kr (311,20 kr)

Fjernlager, 2-4 dager til forsendelse

Danfoss Aveo RA/V service thermostat with built-in sensor and service gland

Danfoss Aveo Service thermostat with built-in sensor. Setting range 7-28°C, Frost protection, Service gland.

419,00 kr (335,20 kr)

Fjernlager, 3-5 dager til forsendelse

Danfoss Icon Master Controller OTA 24v with 15 channels

Danfoss Icon Master Controller 24V with 15 channels. Underfloor heating control for the Danfoss Icon series with 15 outputs for thermal actuators. Up to 15 room thermostats, wireless/wired, can be registered. The Master Controller must be combined with the Danfoss Icon radio module if wireless room thermostats are to be registered. Automatic balancing, active pump relay, function test and potential-free boiler relay are standard. It is possible to purchase the Danfoss Icon app-module which provides access to app-control of the underfloor heating system via an iOS or Android device. The app-module also provides access to online updating of the Master Controller firmware (OTA). Cooling control and demand-controlled flow temperature can be purchased using the Danfoss Icon expansion module. The Master Controller is compatible with Zigbee 3.0 systems such as Danfoss Ally or 3rd party Zigbee systems. For Zigbee integration, the Danfoss Icon Zigbee module is used, which is connected to the Master Controller's app input.

2 988,00 kr (2 390,40 kr)

Fjernlager, 2-4 dager til forsendelse

Mandag - Torsdag:	9.00 - 15.00
Fredag - Søndag:	Stengt

Telefon: +47 35060606	+47 35060606
E-post privatkunder:	[email protected]
E-post bedriftskunder:	[email protected]