Danfoss - side 23

Danfoss SSM underfloor heating manifold in stainless steel with output for 8 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Danfoss 065F2033 VVS-kobling

Danfoss AME 20 aktuator. AMV 20/23 er aktuatorer for trestegskontroll og AME 20/23 er aktuatorer for modulerende kontroll, videre har AMV(E) 23-aktuatorer sikkerhetsfunksjon. Fjærreturaktuatorer kan brukes til å gi sikkerhetsavstengning av strøm

Danfoss 060-004866 VVS-kobling

Danfoss 003N8142 VVS-ventil Kontrollventil

Serviceelement for utskifting på AVTA- og AVTB-termostatventiler.

Lomme for sensor 180 MM MS, R1/017-436766 fra DANFOSS A/S

The DEVImat TM 150T (150W / m2) is a thin heating cable mat, self-adhesive all-in-one mat, with a very low recess height of only 3.5 mm, perfect for renovating existing floors. The heating mat can be used for both total and comfort heating.DEVImat TM is a 360 ° fully shielded double-conductor heating cable of extremely high quality, with FEP insulated conductors and red PVDF outer casing (non-UV resistant). The round profile and robust construction ensure a quick, easy and secure installation.The cold lead is a solid cable installation cable that ensures quick installation. A clearly visible assembly prevents accidental installation of the heating cable in the wall.

Danfoss 003Z1063 VVS-kobling

EV210A dekker et bredt spekter av små, direkteopererte 2/2-veis solenoidventiler for bruk i industriell maskinteknikk. Den kompakte designen sammen med det brede utvalget av spoler betyr at EV210A dekker et bredt spekter av industrielle applikasjoner.

Danfoss 065Z0155 VVS-kobling

Danfoss 065F2032 VVS-kobling

Danfoss Aveo Service thermostat with remote sensor, 2m capillary tube. Setting range 7-26°C, Frost protection, Service gland.

Danfoss isolasjonslokk for AB-QM DN32Tailpieces, unionsforbindelser osv. for AB-QM

Danfoss 065Z0281 VVS-kobling

Danfoss SSM underfloor heating manifold in stainless steel with output for 11 heating circuits and flow meters. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is with a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

MBS 3100, Compact pressure transmitters for marine applications,The compact ship approved pressure transmitter MBS 3100 is designed for use in almost all marine applications, and offers a reliable pressure measurement, even under harsh environmental conditions.The flexible pressure transmitter programme is approved according to LR, DNV, GL, RINA, ABS, BV, NKK, PRS, MRS requirements and covers a 4-20 mA output signal, absolute and gauge (relative) versions, measuring ranges from 0-1 to 0-600 bar, plug and cable connections and a wide range of pressure connections.,Excellent vibration stability, robust construction, and a high degree of EMC/EMI protection equip the pressure transmitter to meet the most stringent marine requirements.,•4 - 20 mA output signal,•Operating temperature -40 to 85° C, •Measuring range 0 - 600 bar,•Standard pressure connection G 1/4A DIN 16288, G 1/4A, O-ring DIN 3852 G 1/2A DIN 16288,•Available with all relevant marine approvals,•Suited for marine applications

Danfoss TWA-V termisk aktuator 230V NC. Termisk aktuator TWA-V-serien brukes med elektriske på/av-kontroller for å aktivere flere typer Danfoss-ventiler med RAV og VMT/8-tilkobling. Aktuatoren er utstyrt med en visuell posisjonsindikator for å vise t'

Lomme for sensor 017-437066 fra DANFOSS A/S

EtherNet IP (MCA121) Produktbeskrivelse: For bruk med FC-102, FC-202 og FC-302 seriene. HUSK kit 130B5612 når den brukes med A4 kabinett. HUSK kit 130B5436 når den brukes med A5, B1, B2, C1 og C2 kabinetter.

Danfoss 003Z4002 VVS-kobling

Danfoss RA-DV dynamisk ventil. Danfoss Dynamic Valve er en innovativ radiatorventil med en 2-i-1 ventil design. Den kombinerer en termostatisk radiatorventil og en differenstrykkontroller for nøyaktig temperaturkontroll og automatisk hydraulisk balansering

Danfoss SSM underfloor heating manifold in stainless steel with output for 12 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Danfoss 003L3531 termostat

The DEVImat TM 150T (150W / m2) is a thin heating cable mat, self-adhesive all-in-one mat, with a very low recess height of only 3.5 mm, perfect for renovating existing floors. The heating mat can be used for both total and comfort heating.DEVImat TM is a 360 ° fully shielded double-conductor heating cable of extremely high quality, with FEP insulated conductors and red PVDF outer casing (non-UV resistant). The round profile and robust construction ensure a quick, easy and secure installation.The cold lead is a solid cable installation cable that ensures quick installation. A clearly visible assembly prevents accidental installation of the heating cable in the wall.