With the DJI RS Intelligent Tracking Module, you can easily keep track of your subjects when using an RS 4 series handheld gimbal stabilizer. The compact unit quickly attaches to the RS 4 series gimbal with a magnetic mount and securely locks into place. It is designed to work with the gimbal’s ActiveTrack technology, allowing you to activate intelligent tracking and framing of people with a single tap from up to 10 meters away.

The module can be controlled directly from the gimbal or using hand gestures. You can start and stop tracking or activate different modes such as orbit mode, POV/selfie mode, or backward tracking shots. It can easily recognize your subject even in scenes with multiple people, making it possible to follow a specific subject through complex scenarios.

The package includes the DJI RS Intelligent Tracking Module, a USB-C cable for firmware updates, a magnetic adapter mount, and a limited 1-year manufacturer warranty.

Spare parts Flip
Propellers (Pair)

DJI WB37 charging hub (USB-C)
The hub allows you to charge up to 2 batteries simultaneously. It supports 65W PD fast charging, and charging time depends on the voltage of the selected charger (not included).

Foldbar propell (CW), for Agras T16, T20

Høydejusterbare kontrollpinner, for RC Plus

DJI CP.MA.00000703.01 camera drone part Gimbal protection kit

Each propeller blade has been put under precise dynamic balancing tests to increase aerodynamic efficiency and output less noise.

ØKT EFFEKTIVITET
DJI Inspire 3 sammenleggbare hurtigutløsende propeller har blitt testet med presis dynamisk balansering for å øke aerodynamisk effektivitet og produsere mindre støy.

Save yourself time and money by packing this set of four Propellers for Avata 2 from DJI into your gear bag. A day of shooting doesn't have to end because of a broken propeller. With an optional screwdriver, you have everything you need here to replace all of the propellers on the DJI Avata 2. Included in the set are two clockwise propellers, two counterclockwise propellers, and the eight screws needed to attach them to the Avata 2's arms.

In the Box:

DJI Propellers for Avata 2 (Set of 4)
2 x Clockwise Propeller
2 x Counterclockwise Propeller
8 x M2 x 8.7mm Screw

DJI Ronin 2 Universal Tripod Adapter Stativadapter Sort, Grå 1 stykker

The DJI Ronin 2 C-Stand Bracket is designed to mount onto C-stands with a 5/8" baby pin, allowing you to securely attach the DJI Ronin 2 gimbal.

DJI's Remote Controller for Ronin-M is a dedicated 2.4 GHz handheld transmitter that comes pre-configured for operating the Ronin-M gimbal. With this transmitter, one operator can carry the gimbal while a second operator remotely controls the gimbal's pan, tilt, and roll, allowing for much more precise camera movements than a single operator can achieve.

This remote is designed specifically for the Ronin-M and is not compatible with the Ronin. Please ensure the remote control is sufficiently charged before use, as it will automatically power off if the battery voltage becomes too low. The internal battery should be charged using the included Micro-USB cable, and using the incorrect type of charging cable may cause damage. Always turn off the remote control before charging. The power LED indicator will glow solid green when the battery is fully charged. When using the remote, ensure the antenna is at least 7.9" away from any person.

The key features of the remote controller include an internal battery with USB charging, a power indicator light, LEDs that show the remaining battery, a carry handle, and a neck strap attachment point. The remote is also configurable and updatable with the RC Assistant software.

For controls with default settings, the right 3-position switch is used to select the mode, while the left 3-position switch is used to select the function (Fast, Normal, and Slow). The left dial is reserved, and the right joystick controls the horizontal pan axis and vertical tilt axis. The left joystick controls the roll axis with horizontal movements.

DJI's Remote Controller for Ronin is a dedicated 2.4 GHz handheld transmitter, pre-configured for seamless Ronin gimbal operation. It allows one operator to carry the gimbal while another remotely controls pan, tilt, and roll for more precise camera movements than a single operator could achieve alone.

This remote is specifically designed for use with the Ronin and is not compatible with the Ronin-M. Ensure the remote control is fully charged before use — it will automatically power off if the battery voltage drops too low. The internal battery charges via the included Micro-USB cable, and using an incorrect cable may cause damage. Always turn off the remote before charging; the power LED will glow solid green once the battery is fully charged.

For safe operation, the antenna should remain at least 7.9 inches away from any person while in use.

The controller features an internal battery with USB charging, a power indicator light, LEDs to show remaining battery life, a carry handle, and a neck strap attachment point. It’s also configurable and updatable using DJI's RC Assistant software.

By default, the controls include a right 3-position switch for selecting modes and a left 3-position switch to choose functions like Fast, Normal, or Slow. The right joystick controls pan with horizontal movements and tilt with vertical ones, while the left joystick manages roll horizontally. The left dial is reserved for future use.

PROSSD Mount, for DJI Ronin 4D

Foldbar propell (CW) (en pakke 2), for Agras

DJI CP.MA.00000467.01 batterilader Batteri til kameradrone/fjernkontroll AC

Bilstrømadapter, 65 watt, 5 A, PD, 2 utgangskontakter (USB, USB-C), på kabelen: USB-C, for Mavic 3

Bilstrømadapter, for FPV

Upward Gimbal Connector

Ekspansjonsbasesett, for DJI RS 2

Propeller, for Matrice 30

Batteri, Li-Ion, 2420 mAh, 35.71 Wh, 7C

Folding Propeller Kit, for Agras MG-1

Propellers (pack of 2)

Propeller, for Spreading Wings S1000, S900