B.E.G. Bevegelsessensorer og skumringsbrytere

Product: LC-Click-N 200 (91022) black. Motion sensor with a detection range of 200 °. Sensor head can be turned on two levels. Range can be adjusted by rotating the sensor head. Masking terminals for precise shielding of sources of interference or to bregrænsning of the detection. Adjustable lux value and the delay time with potentiometer on the sensor's underside. Wall mounting, Simple installation. Application examples: monitoring of narrow grounds, driveways Mains: 230 V ~ ± 10%. Detection range: 200 ° + 360 °. Range (around) m: max. 12 m by moving across the detection area (tangential). Protection: IP44 / Class II / CE. Dimensions: L 103 x W 78 x H 78 mm Ambient temperature: -25 ° C to + 50 ° C. Housing: UV-resistant High-quality polycarbonate Channel 1 (light control) .max Load: 1000 W, power factor measure = 1, Time settings: 4 sec. - 10 min. Brightness Value: 2-2500 Lux.

Bevegelsesdetektor med 230° deteksjonsområde og anti-kryp-sone. Mekanisk områderegulering. Forskjellig oppfølgingstid avhengig av bevegelsesretning. Uavbrutt parallellkrets deteksjon av flere detektorer. Manuell bryter via trykknapp mulig. Justerbar kulehode, umiddelbar drift ved bruk av fabrikkinnstillinger, ytterligere funksjoner kan settes opp ved hjelp av den valgfrie fjernkontrollen, sokkelkompatibilitet med RC-plus (next) og VarioEasy-montering takket være pluggbasen, vegg-, tak- og hjørnemontering, fabrikkinnstillinger 3 minutter og 20 lux; eksempler på bruksområder: for smale lokaler, gangveier, inngangspartier'

Bevegelsesdetektor med 230° deteksjonsområde og anti-kryp-sone. Mekanisk områderegulering. Forskjellig oppfølgingstid avhengig av bevegelsesretning. Uavbrutt parallellkrets deteksjon av flere detektorer. Manuell bryter via trykknapp mulig. Justerbar kulehode, umiddelbar drift ved bruk av fabrikkinnstillinger, ytterligere funksjoner kan settes opp ved hjelp av den valgfrie fjernkontrollen, sokkelkompatibilitet med RC-plus (next) og VarioEasy-montering takket være pluggbasen, vegg-, tak- og hjørnemontering, fabrikkinnstillinger 3 minutter og 20 lux; eksempler på bruksområder: for smale lokaler, gangveier, inngangspartier'

Product: LC-Click-N 140 (91021) black. Motion sensor with a detection range of 140 °. Sensor head can be turned on two levels. Range can be adjusted by rotating the sensor head. Masking terminals for precise shielding of sources of interference or to bregrænsning of the detection. Adjustable lux value and the delay time with potentiometer on the sensor's underside. Wall mounting, Simple installation. Application examples: monitoring of narrow grounds, driveways. Power supply voltage: 230V ~ ± 10%. Detection range: 140 ° + 360 °. Range (approximately) in m :. max. 12 m by moving across the detection area (tangential). Protection: IP44 / Class II / CE. Dimensions: L 103 x W 78 x H 78 mm. Ambient temperature: -25 ° C to + 50 ° C. Housing: UV-resistant polycarbonate high-quality. Channel 1 (light control). Max Load: 1000 W, power factor measure = 1, Time settings: 4 sec. - 10 min. Brightness Value: 2-2500 Lux sec. - 10 min. Brightness Value: 2-2500 Lux.

Product: LC-Click-N 140 (91001) white. Motion sensor with a detection range of 140 °. Sensor head can be turned on two levels. Range can be adjusted by rotating the sensor head. Masking terminals for precise shielding of sources of interference or to limit the detection area. Adjustable lux value and the delay time with potentiometer on the sensor's underside. Wall mounting, Simple installation. Application examples: monitoring of narrow grounds, driveways. Power supply voltage: 230V ~ ± 10%. Detection range: 140 ° + 360 °. Range (approximately) in m :. max. 12 m by moving across the detection area (tangential). Protection: IP44 / Class II / CE. Dimensions: L 103 x W 78 x H 78 mm. Ambient temperature: -25 ° C to + 50 ° C. Housing: UV-resistant polycarbonate high-quality. Channel 1 (light control). Max Load: 1000 W, power factor measure = 1, Time settings: 4 sec. - 10 min. Brightness Value: 2-2500 Lux sec. - 10 min. Brightness Value: 2-2500 Lux.

Product: PD3-1C-P (92194) Motion detector LUXOMAT® PD3-1C-P for surface mounting on the ceiling, PL-box and the wall. A channel for ignition of light. Thick relay for ignition of lamps with high consumption. In particular, an optical system for detecting the slightest movements. Series production impulse function. Application examples: monitoring of smaller surfaces such. stairwells, private garages, lobbies, restrooms. Power supply voltage: 230V ~ ± 10% Detection range: 360 ° Range (around) m: - across Ø 10.00 m - head Ø 6.00 m. Protection: IP44 / Class II / CE Dimensions: Ø 106 x H 53 mm. Ambient temperature: -25 ° C to + 50 ° C. Housing: UV-resistant polycarbonate high-quality. Channel 1 Max Load: 2300 W, power factor measure = 1, 1150 VA, power factor measure = 0.5. Time settings: 30 sec. - 30 min. or pulsed. Brightness Value: 10-2000 Lux. Power consumption:> 0.5W

Product: LC-Click-N 200 (91002) white. Motion sensor with a detection range of 200 °. Sensor head can be turned on two levels. Range can be adjusted by rotating the sensor head. Masking terminals for precise shielding of sources of interference or to limit the detection area. Adjustable lux value and the delay time with potentiometer on the sensor's underside. Wall mounting, Simple installation. Application examples: monitoring of narrow grounds, driveways. Power supply voltage: 230V ~ ± 10%. Detection range: 200 ° + 360 °. Range (around) m: max. 12 m by moving across the detection area (tangential). Protection: IP44 / Class II / CE. Dimensions: L 103 x W 78 x H 78 mm Ambient temperature: -25 ° C to + 50 ° C. Housing: UV-resistant High-quality polycarbonate Channel 1 (light control) .max Load: 1000 W, power factor measure = 1, Time settings: 4 sec. - 10 min. Brightness Value: 2-2500 Lux

Product: Indoor 180-M-2C (92136)for installation in EURO canned or on substrates. Fjernbetjenbar presence detectors LUXOMAT® Indoor 180-M-2C Master as wall sensor with 180 ° detection. Can be combined with hedging hits in five different colors. In connection with the frame suitable for all common IP switch products. Two channels, one for switching on the lighting, the other potential free to the ignition of HVAC (heating, air conditioning and ventilation). You can connect an unlimited number of slaves for cheap extension of the detection area! Fixtures IP20 and IP54. Measurement of mixed light, day and artificial light (principle of presence sensor) Brightness level and delay time can be adjusted. For mounting heights from 1.10 to 2.20 m with accessory support (92141) can be mounted on the outside of a wall. Application examples: monitoring of public lavatories, corridors, archive rooms, etc. Covers must be ordered separately! Power supply voltage: 230V ~ ± 10%. Detection range: 180 ° Range (around) m: max. 10,00m, Protection: IP20 / Class II / CE, Dimensions: L 87 x W 87 x D 61 mm Ambient temperature: -25 ° C to + 50 ° C , Housing: UV-resistant polycarbonate high-quality. Remote controllable: IR-PD IR-PD-Mini. Channel 1 (light control) 2300 W, power factor measure = 1, 1150 VA, power factor measure = 0.5. Time settings: 15 sec. - 30 min. or pulse Brightness Value: 5-2000 Lux, Channel 2 (HVAC): Max Load: Shutter, NO contact, 3A, 230V, power factor measure = 1 Time settings: Alarm pulse, impulse or 5 - 120min. Power consumption:> 0.5W.

Product: PD2-M-1C-i (92565) Presence detector LUXOMAT® PD2-M-1C as Master version for mounting recessed ceiling or wall. A channel for ignition of light (potential). Thick relay for ignition of lamps with high consumption. In particular, an optical system for detecting the slightest movements. You can connect an unlimited number of slaves for cheap extension of the detection area! Series production impulse function Application examples: offices, conference rooms, schools, kindergartens, hospitals. Power supply voltage: 230V ~ ± 10%. Detection range: 360 °. Range (around) m: - sitting Ø 4.00 m - across Ø 10.00 m - head Ø 6.00 m. Protection: IP20 / Class II / CE Dimensions: Ø 98 x H 50 mm. Ambient temperature: -25 ° C to + 50 ° C Housing: UV-resistant polycarbonate high-quality. Channel 1 (light control), Max Load: 2300 W, power factor measure = 1, 1150 VA, power factor measure = 0.5, Time settings: 15 sec. - 30 min. or impulse, Brightness Value: 10-2000 Lux. Power consumption:> 0.5W

Bevegelsesdetektor med 130° deteksjonsområde og anti-kryp-sone. Mekanisk områderegulering. Forskjellig oppfølgingstid avhengig av bevegelsesretning. Uavbrutt parallellkrets deteksjon av flere detektorer. Manuell bryter via trykknapp mulig. Justerbar kulehode, umiddelbar drift ved bruk av fabrikkinnstillinger, ytterligere funksjoner kan settes opp ved hjelp av den valgfrie fjernkontrollen, sokkelkompatibilitet med RC-plus (next) og VarioEasy-montering takket være pluggbasen, vegg-, tak- og hjørnemontering, fabrikkinnstillinger 3 minutter og 20 lux; eksempler på bruksområder: for smale lokaler, gangveier, inngangspartier'

Product: PD4-S-GH-P (92265) Presence detector LUXOMAT® PD4-S- GH, Slave with oval detection range and the range for mounting in fixed ceiling or PL dåse.Stort savings potential especially in large spaces and in monitoring of large surfaces. It requires only a Master of ignition of light and ventilation Possibility of detection of movement in all local segments with slaves pulse signal to the Master of detected movement. Detection of movement independent of the ambient brightness. No setting items on the Slave. Sensor and præstationsdel in a cabinet. Application examples: monitoring of warehouses and warehouse with high racks, where the mounting height is great. Power supply voltage: 230V ~ ± 10%. Detection range: 360 ° .Rækkevidde (approximately) im - across Ø 44.00 m. Protection: IP20 / Class II / CE. Dimensions: Ø 98 x H 63 mm Ambient temperature: -25 ° C to + 50 ° C. Housing: UV-resistant polycarbonate high quality Slave output Slave device: 230 V. Power consumption:> 0.5W.

Produkt: PD2-S-P (92152) Tilstedeværelsessensor LUXOMAT® PD2-S, Slave med 360 graders deteksjonsfelt for innfelt tak. Stort potensial for energisparing. Det krever bare en Master av tenning av lys og ventilasjon. Mulighet for bevegelsesdeteksjon i alle lokale segmenter med slaver. Pulssignalet til Master of detected movement. Bevegelsesdeteksjon uavhengig av omgivende lysstyrke Ingen innstillingsartikler på Slave-sensoren og præstationsdel i et skap Applikasjonseksempler: møterom, klasserom, enkeltkontorer, garasjer Mains: 230 V ~ ± 10% Deteksjonsområde: 360 ° Rekkevidde (rundt) m: - sittende Ø 4 00 m - over Ø 10,00 m - hode Ø6 ,00m Beskyttelse: IP20 / Klasse II / CE Dimensjoner : Ø80 x H84,5 mm Omgivelsestemperatur : -25 ° C til +50 ° C Skap : av UV-bestandig polycarbonat høy kvalitet Pulsfunksjon : Pulsavstand på to sekunder eller ni sekunder Slaves utgang Slavedevice :230V Strømforbruk:>0,5W.

Product: PD3-1C-i (92197) Motion detector LUXOMAT® PD3-1C-i, recessed ceiling and wall. A channel for ignition of light. Thick relay for ignition of lamps with high consumption. In particular, an optical system for detecting the slightest movements. Series production impulse function (gong). Application examples: monitoring of smaller surfaces such. stairwells, private garages, lobbies, restrooms. Power supply voltage: 230V ~ ± 10%. Detection range: 360 °. Range (around) m: across Ø 10.00 m, head-Ø 6.00 m. Protection: IP44 / Class II / CE. Dimensions: Ø 83 x H 81 mm Ambient temperature: -25 ° C to + 50 ° C Housing: UV-resistant polycarbonate high-quality. Channel 1 (light control) Max Load: 2300 W, power factor measure = 1, 1150 VA, power factor measure = 0.5. Time settings: 30 sec. - 30 min. or pulse Brightness Value: 10-2000 Lux. Power consumption:> 0.5W

Product: PD4-M-1C-i (92585) Presence / motion detector LUXOMAT® PD4-M-1C as Master version for wall mounting, recessed ceiling and wall. Thick relay for ignition of lamps with high consumption especially optical system for detecting the smallest movements. You can connect an unlimited number of slaves for cheap extension of the detection area! Series production impulse function. Application examples: monitoring of large surfaces such. parking garages, gyms, warehouses, loading ramps, halls etc. Power supply voltage: 230V ~ ± 10%. Detection range: 360 ° Range (around) m: - sitting Ø 6.40 m - across Ø 24.00 m - head Ø 8.00 m Protection: IP20 / Class II / CE. Dimensions: Ø 97 x H 103 mm. Ambient temperature: -25 ° C to + 50 ° C. Housing: UV-resistant polycarbonate high-quality. Channel 1 (light control) Max Load: 2300 W, power factor measure = 1, 1150 VA, power factor measure = 0.5. Time settings: 15 sec. - 30 min. or pulse Brightness Value: 10-2000 Lux. Power consumption:> 0.5W.

Okkupansdetektor pd3n-1c/fc

Product: PD2-M-1C-P (92550) Presence detector LUXOMAT® PD2-M-1C as Master version for mounting onto ceiling, wall or PL can. A channel for ignition of light (potential). Thick relay for ignition of lamps with high consumption. In particular, an optical system for detecting the slightest movements. You can connect an unlimited number of slaves for cheap extension of the detection area! Series production impulse function Application examples: offices, conference rooms, schools, kindergartens, hospitals. Power supply voltage: 230V ~ ± 10%. Detection range: 360 °. Range (around) m: - sitting Ø 4.00 m - across Ø 10.00 m - head Ø 6.00 m. Protection: IP20 / Class II / CE Dimensions: Ø 98 x H 50 mm. Ambient temperature: -25 ° C to + 50 ° C Housing: UV-resistant polycarbonate high-quality. Channel 1 (light control), Max Load: 2300 W, power factor measure = 1, 1150 VA, power factor measure = 0.5, Time settings: 15 sec. - 30 min. or impulse, Brightness Value: 10-2000 Lux. Power consumption:> 0.5W

Product: IR ADAPTOR (92726) Infrared adapter for smartphone (Android and iPhone) that can program all BEG sensors, not KNX. Remember to download the free app.

Bevegelsesdetektor med 280° deteksjonsområde og anti-kryp-sone. Mekanisk områderegulering. Forskjellig oppfølgingstid avhengig av bevegelsesretning. Uavbrutt parallellkrets deteksjon av flere detektorer. Manuell bryter via trykknapp mulig. Justerbar kulehode, umiddelbar drift ved bruk av fabrikkinnstillinger, ytterligere funksjoner kan settes opp ved hjelp av den valgfrie fjernkontrollen, sokkelkompatibilitet med RC-plus (next) og VarioEasy-montering takket være pluggbasen, vegg-, tak- og hjørnemontering, fabrikkinnstillinger 3 minutter og 20 lux; eksempler på bruksområder: for smale lokaler, gangveier, inngangspartier'

Product: PD3N-1C-P Micro (92219) Motion detector LUXOMAT® PD3-1C for attachment to the wall surface mounting in ceiling and PL can. A channel for ignition of light. Thick relay for ignition of lamps with high consumption. In particular, an optical system for detecting the slightest movements. Series production impulse function (gong). Fixtures with integrated acoustic sensor for detecting people who would otherwise not be detected by the sensor infrared rays (eg. In corners or behind walls)! Application examples: monitoring of smaller surfaces such. stairwells, private garages, lobbies, restrooms. Power supply voltage: 230V ~ ± 10%, Detection: 360 ° Range (around) m: - across Ø 10.00 m - head Ø 6.00 m. Protection: IP44 / Class II / CE, Dimensions: Ø 106 x H 53 mm. Ambient temperature: -25 ° C to + 50 ° C. Housing: UV-resistant polycarbonate high-quality. Remote controllable: IR PD3N, IR-PD-Mini. Channel 1 (light control): Max Load: 2000 W, power factor measure = 1, 1000 VA, power factor measure = 0.5. Time settings: 30 sec. - 30 min. or pulsed. Brightness Value: 10-2000 Lux. Power consumption:> 0.5W

Produkt: Bueutslukkingssett (10880) Kapasitor absorberer toppspenninger og reduserer

Product: PD4-M-1C-K-P (92587) Presence / motion detector LUXOMAT® PD4-M-1C-K-P for mounting in fixed ceiling or PL canned, with narrow detection range specifically for korridorer. Kraftigt relay for ignition of lamps with high consumption. In particular, an optical system for detecting the slightest movements. Series production impulse function Application examples: monitoring of long corridors etc. Power supply voltage: 230V ~ ± 10%, Detection: 360 ° Range (around) m: - sitting Ø 6.40 m - across Ø 24.00 m - head Ø 8 00 m Protection class: IP20 / Class II / CE, Dimensions: Ø 97 x H 103 mm. Ambient temperature: -25 ° C to + 50 ° C Housing: UV-resistant High-quality polycarbonate Channel 1 (light control), Max load: 2300 W, power factor measure = 1, 1150 VA, power factor measure = 0.5 Time settings: 15 sec. - 30 min. or pulsed. Brightness Value: 10-2000 Lux. Power consumption:> 0.5W

Product: PD4-M-1C-GH-P (92245) Presence / motion detector LUXOMAT® PD4-M-1C-GH-P Master version for ceiling mounting with oval detection area and about 44 m range specifically for the storage of high shelving. Thick relay for ignition of lamps with high consumption can connect an unlimited number of slaves for cheap extension of the detection area! Instant commissioning with factory settings. Turning the lighting as well as setting the parameters with the remote control LUXOMAT® IR-PD4-GH. Application examples: monitoring of warehouses and warehouse with high racks, where the mounting height is great. Power supply voltage: 230V ~ ± 10% Detection range: 360 ° Range (around) m: - across Ø 44.00 m Protection: IP20 / Class II / CE. Dimensions: Ø 98 x H 63 mm Ambient temperature: -25 ° C to + 50 ° C Housing: UV-resistant High-quality polycarbonate Channel 1 (light control), Max load: 2300 W, power factor measure = 1, 1150 VA, power factor measure = 0.5 Time settings: 15 sec. - 30 min. or pulse Brightness Value: 10-2000 Lux 15 seconds. - 30 min. or pulse Brightness Value: 10-2000 Lux. Power consumption:> 0.5W

Product: CdS -T-P (92367) Twilight switch with integrated switch can be operated remotely using the IR-CdS-T (optional) - more features than the traditional operation via rotary controller programmable energy saving periods at the touch of a button thanks to the integrated kontakturIndlæsning of the current brightness Examples of application: ideal for use in entrance zones, stairwells corridors where there must always be bright. Power supply voltage: 230V ~ ± 10%. Protection: IP54 / Class II / CE Dimensions: L 47 x W 57 x H 65 mm. Ambient temperature: -25 ° C to + 50 ° C. Housing: UV-resistant polycarbonate high-quality. Remote controllable: IR-CdS-T. Energy Saving: Light off Flexible adjustable (only with IR-CdS-T). Channel 1 (light control) Max Load: 2300 W, power factor measure = 1 1150 VA, power factor measure = 0.5 Brightness Value: 2-300 Lux.

• Påbygningsunderlag til KNX-N• IP54

Produkt: PD4-S-i (92254) Tilstedeværelsesdetektor LUXOMAT® PD4-S, Slave og rekkevidde for innfelt tak. Stort potensial for energisparing spesielt i store rom og overvåkning av store overflater. Det krever bare en Master for tenning av lys og ventilasjon. Mulighet for deteksjon av bevegelse i alle lokale segmenter med slavesignalet til Masteren om oppdaget bevegelse. Bevegelsesdeteksjon uavhengig av omgivende lysføler og præstationsdel i et skap. Eksempler på bruksområder: Overvåking av store redundante flater, f.eks parkeringshus, treningsstudioer, lagerbyggninger, lasteramper, haller osv. Strømforsyningsspenning: 230V ~ ± 10%. Deteksjonsområde: 360 ° . Rekkevidde (rundt) m: - sittende Ø 6,40 m - tvers Ø 24,00 m - hodet Ø 8,00 m Beskyttelse: IP20 / Klasse II / CE Dimensjoner : Ø97 x H103 mm Omgivelsestemperatur : -25 ° C til +50 ° C Hus : UV-bestandig polycarbonat høy kvalitet Pulsfunksjon : Pulsspacing på 2 sek eller 9 sek Slavesignalutgang Slavenhet :230 V Strømforbruk:>0 ,5W