Wera - side 9

L-nøkkelsett, 9 deler, inn clip fastener

High quality Wera Micro screwdriver for precision mechanical jobs. Rapid twisting results from fixing the hand on the head and using the fast-turning zone just below. This makes time-consuming grip adjustments unnecessary. Power zones with integrated soft sections ensure the transfer of high loosening and tightening torque; a precision zone for the right rotation angle during fine adjustment work. The Black Point tip offers optimised corrosion protection and an exact fit.

VDE blade for Kraftform Kompakt VDE handle/interchangeable blade system for rapid exchange of the blade without needing any special tools. Individually tested tools as per IEC 60900. Individual test in water bath at 10,000 volts for secure work at the permissible voltage of 1,000 volts. The Wera Black Point tip offers a perfect fit and optimised corrosion protection.

Høykvalitets muttertrekker fra Wera. Multi-komponent Kraftform-håndtak for høye arbeidshastigheter og spesielt ergonomisk skruing. Kraftform Plus: harde gripeområder for høye arbeidshastigheter, mens myke soner sikrer høy dreiemomentoverføring. Seks-kantet anti-rullefunksjon hindrer at verktøyet ruller bort, og håndtaksmerking gjør det enklere å finne og sortere verktøyet til sekskantede skruer.

Høykvalitets slangeklemme skrutrekker fra Wera. Multi-komponent Kraftform håndtak for høye arbeidshastigheter og spesielt ergonomisk skruing. Kraftform Plus: harde gripe soner for høye arbeidshastigheter mens myke soner sikrer høy dreiemomentoverføring. Fleksibelt blad for å nå vanskelig tilgjengelige steder. Sekskantet anti-rullefunksjon hindrer at verktøyet ruller bort, og håndtaksmerking gjør det enklere å finne og sortere verktøyet.

Impact socket bit set, 6 deler, 1/2", torx, TX25, TX30, TX40, TX45, TX50, TX55, lengde: 60 mm

Skrutrekkersett, 6 deler, inn rack

Universal holder for bits with 14" hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). BiTorsion holders by Wera have a torsion spring that absorbs low peak loads during screwdriving jobs. The combined use with BiTorsion bits and their torsion zones extends the service life of the tool considerably. BiTorsion holders by Wera can, however, also be used with conventional bits. The Rapidaptor technology allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward. This enables rapid bit change with just one hand. 14" hexagonal, suitable for power screwdrivers with take-up as per DIN ISO 1173-F 6.3.

Wera 855/4 PZ/S skrutrekker bits 1 stykker

Høykvalitets L-nøkkelsats for innfelte TORX®-skruer. Holdfunksjon: kilekreftene som oppstår fra kontaktrykket mellom drivspissen og skrueprofilen, holder skruen sikkert på verktøyet. Med en ekstra lang arm. BlackLaser-overflatebehandling gir utmerket overflatebeskyttelse, selv mot korrosjon, og lang levetid. Verktøyene er raskt tilgjengelige takket være de lasergraverte og dermed slitesterke størrelsesmarkeringene på L-nøklene. Leveres i en praktisk klipsfeste av slitesterkt materiale, som muliggjør sikker oppbevaring av L-nøklene samt enkel fjerning.

High quality, metric double open-end wrench by Wera: everything that a wrench has to be able to do. And a whole lot more. Faster, better, stylish. Yes, a real Joker. The new generation of combination ratchet wrenches for hexagonal head bolts and nuts. It has a holding function, thanks to the metal plate in the jaw, which reduces the risk of dropping nuts and bolts. The replaceable metal plate in the jaw secures nuts and bolts with its extra hard teeth and reduces the danger of slipping. The integrated limit stop prevents any slipping downwards around the bolt head and allows higher torque to be applied. The double-hex geometry makes for a positive connection with nuts or bolts and reduces the risk of slipping. A return angle of only 30° prevents any time consuming flipping of the wrench during fastening jobs. The specially forged geometry ensures high torque transfer and great strength. Manufactured out of high performance chrome-molybdenum steel with nickel-chrome coating for high corrosion protection. "Take it easy" Tool Finder with colour coding according to sizes.

Wera torque screwdriver. Pre-set torque value for all applications where the same, constant torque and repeat accuracy are required. The torque value can be modified within a specific measurement range. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with ¼” hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173).

Wera VDE skrutrekkere med flerkomponent Kraftform Plus-håndtak for rask og lavt tretthetsarbeid: harde gripeområder for høye arbeidshastigheter mens myke soner sikrer høy dreiemomentoverføring. Kombinasjonsprofil - sporet og Pozidriv * spesielt for jobber på terminalblokker, sikringsbokser, brytere og releer. Individuelt testet i vannbad ved 10 000 volt for sikkert arbeid ved tillatt spenning på 1 000 volt. Den heksagonale anti-rullefunksjonen hindrer irriterende rulling bort fra arbeidsplassen.

Wera 05023404001 ikke kategorisert

High quality L-key with extra-short arm for use on difficult-to-access screws, for hexagon socket screws. The wear-free clip material ensures secure storage of the L-keys as well as simple removal. The Hex-Plus profile offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. The ballpoint on the long arm allows dependable working even in difficult installation situations. The precise chrome-plated design ensures high corrosion protection. Laser-engraved and thereby wear-resistant size markings on the L-keys for rapid accessing.

High quality Wera Micro screwdriver for precision mechanical jobs. Rapid twisting results from fixing the hand on the head and using the fast-turning zone just below. This makes time-consuming grip adjustments unnecessary. Power zones with integrated soft sections ensure the transfer of high loosening and tightening torque; a precision zone for the right rotation angle during fine adjustment work. The Black Point tip offers optimised corrosion protection and an exact fit.

Høykvalitets Wera Micro skrutrekker for presisjonsmekaniske oppgaver. Rask vridning oppnås ved å feste hånden på hodet og bruke den hurtigvridende sonen rett under. Dette gjør tidkrevende grepjusteringer unødvendige. Kraftsoner med integrerte myke seksjoner sikrer overføring av høy løsnings- og tilstrammingstorsjon; en presisjonssone for riktig rotasjonsvinkel under finjusteringsarbeid. Black Point-spissen gir optimal korrosjonsbeskyttelse og en nøyaktig passform.

7-piece screwdriver set with Kraftform handle for pleasant, ergonomic working that prevents blisters and calluses. The Lasertip tip literally bites into the head of the screw and thereby prevents any slipping out of the screw head. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Handle markings for simplified finding and sorting of the tool. Includes a practical rack for tidy storage of the screwdrivers.350 PH 1 x PH 2x100,355 PZ 1 x PZ 1x80, 1 x PZ 2x100,335 1 x 0.8x4.0x100,367 TORX® 1 x TX 15x80, 1 x TX 20x100, 1 x TX 25x100,

L-nøkkelsett, 9 deler, inn holder

Wera 05073421001 nøkkelsett (verktøy) Stikkontakt

Wera 05075626001 ikke kategorisert

Umbrakosett: 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10.0

L-keys for hexagonal socket screws, Hex-Plus allows socket head screws to live longer, BlackLaser for high corrosion protection and long service life, L-keys are quickly to hand thanks to their size markings, Wear-resistant clip material for enhanced durability

Høykvalitets Kraftform Plus skrutrekker. Multi-komponent Kraftform håndtak for rask og lavt tretthet arbeid. Kraftform Plus: harde gripe soner for høye arbeids hastigheter mens myke soner sikrer høy dreiemoment overføring. Hex-Plus tilbyr en større kontaktflate innenfor skruhodet. Dette reduserer hakkingseffekter til et minimum og eliminerer nesten helt risikoen for å ødelegge skrue sporet. Den heksagonale anti-rulle funksjonen hindrer irriterende rulling på arbeidsplassen. Håndtaks merking for forenklet finne og sortere verktøyene.

Wera 350 PH Enkel

High quality bits for spanner screws. Tough viscous for universal use. ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3.