Press fitting system with copper and redware press fittings, approved according to DVGW worksheet W 534 with DVGW approval and copper pipes according to DIN EN 1057, according to DVGW worksheet W 392.
Suitable for drinking water installations according to DIN 1988.
For dimensionally stable surface-mounted and built-in installations of distribution and riser cables in Viega's complete system.

Viega 2426.1

Viega 3241

Viega 2416.1

Viega 2416

Viega 2416.1

Press connector system with press connectors made of copper and gunmetal tested in acc. with DVGW worksheet W 534 with DVGW test seal and pipes made of copper in acc. with EN 1057 in acc. with DVGW worksheet GW 392.Suitable for drinking water installations in acc. with DIN 1988.For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber), up to 110 °C

Press connector system with press connectors made of copper and gunmetal tested in acc. with DVGW worksheet W 534 with DVGW test seal and pipes made of copper in acc. with EN 1057 in acc. with DVGW worksheet GW 392.Suitable for drinking water installations in acc. with DIN 1988.For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber), up to 110 °C

Viega 2316.1

Viega 2316

Selvlåsende isolerende skall for DN 15/20.

Viega 2316.1

Easytop Ball valve with SC-Contur- for water- and heat meter- not suitable for Easytop Insulating shell 2275.90- press connection, G-threadComponentsValve casing gunmetal or silicium bronze according to DIN 50930-6 / DIN EN 1982, maintenance-free selector shaft, black powder-coated actuating lever made of metal, EPDM sealing element, EPDM flat seal.Technical dataoperating pressure max. 1.6 MPa (PN 16)operating temperature max. 110 °Cwith DVGW-test markDN: 15, d: 18, G: 34

Viega 2326

Viega 2318

Viega 2326

Viega 2326.1

Viega 2317.2

Viega 2315

Viega 95041

Viega 95041

Viega 95001A

Redusere kobling - kobber - loddet tilkobling d1: 28, d2: 22 (kvalitetsmerke for d12-54)

Viega 94243G

T-stykke - kobber - loddeforbindelse d1: 18, d2: 15, d3: 18 (kvalitetsmerke for d12-54)