Viega - side 41

Viega 2312

Viega 2311.1

Viega 2315.5

Profipress G T-piece with SC-Contur- gunmetal- press connectors, Rp-thread- polygonComponentsHNBR sealing elements d1: 28, Rp: 12, d2: 28

Viega 2315

Viega 2315.1

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Viega 2312

Viega 2318

Sanpress Inox T-stykke med SC-Contur- stål ikke-korrosive- presskoblingerKomponenterEPDM tetningselementer d1: 18, d2: 15, d3: 18

Viega 2311

Sanpress Inox kobling med SC-Contur - stål som ikke korroderer - pressetilkoblinger, komponenter EPDM tetningselementer d: 54 (VdS-sertifisering)

Viega 2326.1

Sanpress Inox T-stykke med SC-Contur- stål ikke-korrosive- trykk-koblingerKomponenterEPDM tetningselementer, VdS-sertifiseringd1: 54, d2: 22, d3: 54

Viega 2326

Viega 2318

Easytop Ball valve with SC-Contur- for water- and heat meter- not suitable for Easytop Insulating shell 2275.90- press connection, G-threadComponentsValve casing gunmetal or silicium bronze according to DIN 50930-6 / DIN EN 1982, maintenance-free selector shaft, black powder-coated actuating lever made of metal, EPDM sealing element, EPDM flat seal.Technical dataoperating pressure max. 1.6 MPa (PN 16)operating temperature max. 110 °Cwith DVGW-test mark DN: 20, d: 22, G: 34

Viega 2212.1

Viega 2316

Easytop Insulating shell Suitable for Easytop CRV slanted seat valve 2138, 2238, 2238.1, 2238.3, 2238.5, 5338, 5338.5, Easytop Inox CRV slanted seat valve 2338, 2338.5, Easytop Inox Slanted seat valve 2337, 2337.5, Easytop Slanted seat valve 2137, 2237, 2237.1, 2237.3, 2237.5, 5337, 5337.5- self-lockingComponentsInsulating layer thickness according to EnEVDN: 32

Easytop Ball valve with SC-Contur- press connectorsComponentsValve casing gunmetal or silicium bronze according to DIN 50930-6 / DIN EN 1982, maintenance-free selector shaft, actuation lever T-form with medium marking green/red exchangeable, stainless steel ball, EPDM sealing elements.Technical dataoperating pressure max. 1.6 MPa (PN 16)operating temperature max. 110 °Cwith DVGW-test markDN: 15, d: 18

Enkeltopp kuleventil - Innløp/utløp: Rp-gjengekomponenter Ventilkasse av bronse eller silisiumbronse i henhold til DIN 50930-6 / DIN EN 1982, vedlikeholdsfri valgaksel, rustfritt stålkule, aktiveringshendel T-form med mediummarkering grønn/rød utskiftbar. Tekniske data Driftstrykk maks. 1,6 MPa (PN 16) Driftstemperatur maks. 110 °C med DVGW-testmerke DN:15, Rp:12

Viega 2212

Sanpress Sliding coupling with SC-Contur- gunmetal or silicium bronze- press connectors ComponentsEPDM sealing elements, VdS certificationd: 42

Viega 2212