Viega 1112

Viega 1115XL

Viega 1111

Viega 1112

Viega 1126.1

Viega 1115.1

Viega 1126XL

Viega 1111

Viega 1115

Viega 1111

Viega 1115.5

Viega 1116.1

Press connector systems with press connectors and pipes made of non-alloy steel 1.0308 (E235), in acc. with EN 10305-3, externally galvanised with a zinc layer thickness of 8–15 m (blue chromatised).Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingRed symbol (to prevent confusion with Sanpress Inox (stainless steel) articles) »Not for drinking water installations«Sealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber),not resistant against hydrocarbon solvent, chlorinated hydrocarbon solvents, turpentine, petrol, FKM, dull blackDimensionsD38

Viega 4212

Viega 2626

Sanpress Inox XL Adapter with SC-Contur- steel non-corroding- press connection, R-threadComponentsEPDM sealing element, cutting ring, separator ring, polygon, VdS certificationd: 76.1, R: 212

T-piece - copper - solder connection.

Sanpress Inox Plug-in piece- steel non-corroding- plug-in end, Rp-threadComponentsPolygon d: 15, Rp: 12

Viega 2312.1

Viega 2611

Viega 2612

Viega 2415.1

Profipress T-stykke med SC-Contur-kobberpresskoblingerKomponenterEPDM-tetningselementer, VdS-sertifiseringd1: 28, d2: 28, d3: 28

Viega 2415.1

Viega 2415