Rems Verktøy for rørleggerarbeid

REMS pressing tongs MiniVery compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs/pressing rings in forged and specially hardened steel. Pressing contours of REMS pressing tongs/pressing rings are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

Robust quality tools for cutting tubes. Particularly suited for cutting stainless steel tubes.Copper tubes, thin-walled stainless steel tubes, thin-walled steel, aluminium, brass tubes Ø 3 – 28 mm Ø 18 – 118Cutting wheel:4327920515REMS RAS Cu-INOX – for places with difficult access.

Li­Ion PLUS technology. Highly resistant Li­Ion 14.4 V Powerful and light. Total discharge and overload protection with single cell monitoring. Temperature monitoring during the charging process. Operating temperature range –10 to +60 °C. No memory effect for maximum battery power.

Robust quality tool for removing outer and inner burr from pipes.Stainless steel pipes, other steel pipes, copper, brass, aluminium, steel, plastic pipes Ø 8–35 mm, Ø 3/8–1 3/8.

REMS Pull-Push – fast clearance of blockages.Proven, reliable suction and pressure cleaning device for fast clearance of blockages.High pressing force by front, adjustable handle.Optimum adaptation to the cleaning task by 2 sleeves: Short sleeve for wash basins and baths, long sleeve for toilets.

REMS Swing set. One-handed pipe bender Ø 10–32 mm, Ø 3/8"-7/8", up to 90°. Soft copper tubes Ø 10–22 mm, Ø 3/8–7/8", s=1mm, soft plastic coated copper tubes Ø 10–18 mm, Ø 3/8"–5/8", s = 1mm, plastic coated C-steel pipe for press fitting system Ø 12–18 mm, mild precision steel pipe Ø 10–18 mm, s=1mm, plastic pipe with metallic insert Ø 14–32 mm. Up to Ø 26 mm with bends, bend segments, universal stop with sliding pieces, in stable steel case/ case. Up to Ø 32 mm with bends, bend segments, 2 stops with sliding pieces, in stable case.

Powerful, easy-to-operate electric tool for threading with unique, patented support bracket. Ready for use anywhere, without vice. Ideal for repair, renovation, job site.Pipe threads 1/8–2, 16–50 mm. Bolt threads 6–30 mm, 1/4–1. Pipe threads with REMS 4 automatic die head 2 1/2–4.REMS Amigo 2 – extremely strong up to 2.Set incudes Die heads R 1/2 - 3/4 - 1 - 1.1/4 - 1.1/2 - 2

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

Powerful, electric pressure testing pump for pressure and tightness tests of piping systems and receptacles. Testing and pressure range p 60 bar/6 MPa/870 psi. Pumping capacity 6.5 l/min water, hydrous solutions, emulsions, ph-value of liquids 7-10, temperature of liquids 60°C, viscosity of liquids 1.5 mPa s.REMS E-Push 2 – electric charging and testing. Up to 60 bar. With adjustable pressure limiting. 1300 W. Self sucking.

Robust quality tool for removing outer and inner burr from pipes. Stainless steel pipes, other steel pipes, copper, brass, aluminium, steel, plastic pipes Ø 10–54 mm, Ø 1/2–2 1/8.REMS REG 10-54 – the multiple edge up to Ø 54 mm

REMS Tiger ANC VE set. Electric pipe bayonet saw with vario electronics (VE) for easy, fast, perpendicular sawing with pipe holder and for freehand sawing up to 6", 250 mm. Machine with spade handle, maintenance-free, water and dust protected oscillation drive with versatile needle bearing drive (ANC) , aggressive orbital stroke, 230 V, 1050 W, safety rocker switch. Universal saw blade holder for 2". 2 REMS special saw blades 2". In a stable steel case.

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

Mobile, handy inspection camera for affordable inspection and damage analysis of hard-to-reach places such as cavities, shafts, pipes etc. For battery operation.
Documentation of images and videos on MicroSD card. For battery or mains operation.
Camera head Ø 8mm

REMS CamScope HD – sharp images and videos from cavities, shafts and pipes in HD quality (1920  ×  1080 pixels).
MicroSD card holder.

Construction
Super light and handy.
Controller unit with pistol grip and camera cable set, only 0.5 kg. Can be used anywhere, freehand, above head height, even in particularly tight spaces.
Stable, impact-resistant plastic housing with ergonomically designed pistol grip.
The buttons are located directly below the display, making it possible to hold the pistol grip and operate the buttons with one hand.
Buttons for e.g. adjustment of the brightness of the LEDs in the camera head and the display in every 4 steps, mirroring and zooming of the image shown in the display, retrieval and navigation in the menu.
Integrated power LED in the On button for displaying the operating mode.
Li-ion battery 3.7 V with 4.0 Ah for long operating time. Different camera-cable sets HD can be inserted.
Plug-screw connections for replacing camera-cable sets without the use of tools.
Stable case for controller unit with pistol grip, camera-cable set Color 8-1 HD, USB cable and accessories.

Controller unit with TFT-LCD color display
Controller unit with pistol grip with 5" color display with the latest TFT-LCD technology and 480×854 pixels, for the sharpest images and videos.
Possibility of choosing a menu language.
MicroSD card holder.
Images and videos in HD quality can be saved on MicroSD cards for easy documentation of the inspection results. 4x digital zoom. The date and time of the recording can be saved on the image and video if desired.
Instant playback of saved recordings or transfer to other devices per MicroSD card.
USB connection only for direct connection with PC or laptop and for charging the battery.

Battery and mains operation
Li-Ion Technology. Pistol grip controller unit with integrated rechargeable li-ion battery 3.7V, 4.0 Ah. Easy and efficient.
High energy density to approx. 5 hours of continuous operation. During the charging of the battery with the USB cable, the machine can be used via mains operation. No memory effect for maximum battery power.

Interchangeable camera cable set Color
Camera-cable set Color, consisting of color camera Ø 8 mm, with CMOS sensor, with dimmable LEDs with white light for optimal brightness setting and Fixed-Focus function for automatic adjustment of image sharpness, protected against temporary immersion in water ( IP 67).
Camera cable set Color 8-1 HD with 1 m flexible push cable and mirror, hook or magnet for attachment.

Hand pressure test pump with manometer, p = 60 bar/6 MPa/870 psi, for pressure and tightness testing of pipe systems and containers up to 60 bar/6 MPa/870 psi. Corrosion-resistant, powder-coated steel container for 12 l volume. 1.5 m high-pressure hose with 12" connection. In carton.

REMS Akku-Press 22 V ACC Basic-Pack
Electro-hydraulic battery radial press with automatic return and press pressure monitoring for the production of press joints for all common press fitting systems.
Li-Ion 22 V Technology.
Pipe press joints Ø 10 – 108 (110) mm, Ø 3/8 – 4"
"M" press 12 - 54 mm

With automatic return and press pressure monitoring.
Anti-vibration system.
Safe pressing result in a few seconds.
Automatic locking of the press bar.
Battery Li-Ion 21.6 V, 2.5 Ah for approx. 200 presses of Viega Profi press DN 15 per battery charging.

For operation of REMS press bars/press rings and for suitable press bars/press rings of other makes.
Rotatable press bar attachment with automatic lock.
Electro-hydraulic drive with powerful battery motor 21.6 V, 380 W.
Anti-vibration system.
Safety switch.
LED work lamp.
Battery Li-Ion 21.6 V, 2.5 Ah, fast charger Li-Ion 230 V, 50 – 60 Hz, 90 W

Specially hardened and specially ground blade, exchangeable, PTFE-coated.German quality product

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

REMS Frigo 2 F Zero. Electric tube freezer with closed refrigerant circuit. For steel, copper, plastic and plastic pipes with metallic insert Ø 1/8–2", Ø 10–60 mm. Cooling unit 230 V, 50 Hz, 430 W, 2 coolant hoses, 2 clamping bands, spray bottle. Equipment for Ø 1/4"–1 14", 15–42 mm. In stable steel cabinet. Internal refrigerant: R290.

Powerful, easy-to-operate electric tool for threading with unique support bracket. Ready for use anywhere, without vice. Ideal for repair, renovation, job site.Pipe threads 18 – 114, 16 – 40 mm Bolt threads 6 – 30 mm, 14 – 1Set includes Die heads R 12 - 34 - 1 - 114REMS Amigo – the smallest, lightest, strongest and fastest up to 114.

Li­Ion PLUS technology. Highly resistant Li-­Ion 12V battery with 2.5 Ah capacity for long service life. Powerful and light. Total discharge and overload protection with single cell monitoring. Temperature monitoring during the charging process. Operating temperature range –10 to +60 °C. No memory effect for maximum battery power.

Robust quality tools for cutting tubes. Particularly suited for cutting stainless steel tubes.Copper tubes, thin-walled stainless steel tubes, thin-walled steel, aluminium, brass tubes Ø 6 – 35 mm Ø 18 – 138Cutting wheel:4327920515REMS RAS Cu-INOX – the compact version with telescopic spindle.

High compression pressing tongs/pressing rings in forged and specially hardened steel. Pressing contours of REMS pressing tongs/pressing rings are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC & REMS Mini-Press 22V ACC drive units. Read and follow the installation and assembly instructions of the system provider/manufacturer.

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.