Salus 24V NC actuator for underfloor heating with 30mm nut, can be used for all 24V underfloor heating systems.

230 wireless 8 zone control box for Salus iT600 underfloor heating system.

Salus 230 NC actuator for underfloor heating with 30mm nut, can be used for any 230V underfloor heating systems.

24 V Wiring Centre for iT600 Underfloor Heating system

Danfoss TVM-H thermostatic mixing valve. The thermostatic mixing valve TVM-H can be used with different types of storage and instant water heaters for heating applications. It limits and maintains constant levels of mixing temperatures in heating system

Danfoss KP thermostats are used for regulating, monitoring and alarm systems in industry. The KP series are temperature-operated electric circuit breakers. The thermostats are fitted with a single-pole switch (SPDT), and can control single-phase ac motors

Non-demanding applications, with IP65, for valve range B, 9W ac / 15W dc

RT controls are used in general industrial and marine sectors. The RT temperature switch series consist of a variety of ordinary room temperature switches and remote sensor temperature switches including neutral zone temperature switches. RT temperature s

Danfoss A/S, 003N0196

Insulation rings for AVTB

Danfoss KP pressure switches are used for regulating, monitoring and alarm systems in industrial applications. The KP series are suitable for gaseous media and air. They are fitted with a single-pole switch changeover (SPDT), and can control single-phase

Wireless Thermostat with knob

Danfoss KP thermostats are used for regulating, monitoring and alarm systems in industry. The KP series are temperature-operated electric circuit breakers. The thermostats are fitted with a single-pole switch (SPDT), and can control single-phase ac motors

EV220B 15-50 is a universal indirect servo-operated 2/2-way solenoid valve program. Valve body in brass, dezincification resistant brass and stainless steel ensures that a broad variety of application can be covered. Built-in pilot filter as standard, adj

Danfoss AVDO Automatic Bypass Control valve. Angled valve design comprising internal thread in inlet and outlet.

Danfoss adaptor for AMV-AME 435 motors. For old valves type VRB, VRG, VF and VL. DN 15-50

Danfoss AVTB thermostatic water valves. Self-acting temperature controller used to control the water temperature in hot water tanks, heat exchangers, oil preheaters, etc. The controller has a control valve, thermostatic actuator and handle for temperature

Danfoss VMA 2-way seated valve. 2-way seated valve primarily for use in district heating systems.

CS pressure switches have a three-pole switch and adjustable differential. The pressure switches are fitted with a manual switch that will lock the contact system in the open position independently of the pressure in the system.

CS pressure switches have a three-pole switch and adjustable differential. The pressure switches are fitted with a manual switch that will lock the contact system in the open position independently of the pressure in the system.

EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way valve program is especially to use in closed circuits with low differential pressure, but demanding moderate flow rates. Valve body in dezincification res

Wireless actuator for radiator valve with 30mm nut and adapter for RA valve for Salus iT600 heating system

Diving tube pocket 182 mm for AVTB / RAVI.

Danfoss AMV 150 actuator. AMV 150 is an actuator for three point control for use in district heating systems. The actuator is available for the Danfoss ECL Comfort controllers or any other three point controls.

SALUS GVU is a complete floor heating shunt solution for underfloor heating with underfloor heating manifold, shunt and circulation pump built together in one unit.Our circulation pump is a 6m pump with capacity up to 16 zones. The underfloor heating manifold is a high flow manifold with manual balancing of each circuit. Each valve has a built-in manual flow control which is very easy to adjust. Instructions on how to balance the circuit can be found in the distributor box.The SALUS GVM floor heating manifold has a manual vent on each pipe and a drain valve with 1/2 "thread for hose. The Inlet thermostat has a temperature setting of 20 to 55 degrees Celsius. Manifold pipe connection is 1 , and connection to water for the heat supply is 3/4 socket, and threads to the actuator are 30 x 1.5 mm.