Unidrain - side 7

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

HighLine Panel, Cassette or Custom must be selected.

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

For shower cubicles without fixed walls.

The drain unit has four floor flanges.

Including four heght-adjustable feet (40-190 mm).

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile). The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor.

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Utløpsenhet | linje | Ø 75 mm vertikal, inkl. vannfelle

Inkl. avtakbar vannfelle (kan skilles og rengjøres). 180° reversibel når bakoverløp er nødvendig.

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile). The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor.

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile). The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor.

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Rist Unidrain kolonne 1602 er 700 mm.

Rist Unidrain classic med en lengde på 1601 og en bredde på 800 mm.

Rist Unidrain kolonne 1602 måler 1200 mm.

Utløpshusene har en ekstra lav installasjonshøyde og kan muligens kombineres med VA-godkjent lukthindring. En låsebrakett sørger for at utløpshuset alltid er festet til avløpsmonteringen i riktig posisjon, og et par føtter på bunnen av utløpshuset gjør det mulig å feste det til basen.

Rist Unidrain kvadratisk 1604 med en lengde på 1000 mm.

Rist Unidrain stripe med en lengde på 1605 og bredde på 700 mm.

Outlet hus Unidrain Ø50 horisontal med vannlås.

Fit between the drain unit and the outlet unit. Can be used to correct the position of an outlet unit that is too low. 1 x Ø 40-mm side inlet (opened as needed). Not suitable for use with odor barrier 2821.0030.

– If you install water trap 2821.0020 do not turn the side inlet more than 10 degrees away from the center position. Otherwise you will not be able to lift up the water trap for cleaning.

Armatur Unidrain 1003 900 mm hjørne til høyre.

Armatur Unidrain 1003 1000 mm hjørne til høyre.

Armatur Unidrain 1004 300 mm uten flens.

Armatur Unidrain 1003 700 mm hjørne til høyre.

Rist Unidrain kolonne med dimensjoner på 1602 x 800 mm.

ClassicLine rist - linje - rustfritt stål, børstet: Anniversario, 700 mm. ClassicLine Anniversario er en rist som ble lansert i anledning unidrain®'s 10-årsjubileum i 2013. Jubileumsristen bringer den klassiske risten nærmere den eksklusive HighLine-serien og er laget av børstet, rustfritt stål som matcher rammen.

The grating is placed on a countersunk bearing in the frame, to hold it securely.

Only for use with ClassicLine frame.

Outlet hus Unidrain Ø75 vertikal med felle.

Complete square drain set. Package includes HighLine Custom base 10×10 cm, steel drain unit, flow guide, water trap, outlet unit Ø 110 mm horizontal with side inlets, 3 x adapters (2 pcs. for 40 mm pipes and 1 pc. for 32 mm pipe). The height of the unit can be adjusted +/- 10 mm and rotated 360° in the outlet unit. Special adhesive is included to glue your own tile to the custom base. Hook and cleaning cloth included.