I/O panel additional upgrade kit for O11D EVO RGB, white

Thermal pad with extremely high thermal conductivity, outstanding compressibility and electrical non-conductivity for reliable heat transfer on SSDs, GPU coolers and electronic components.

The Minus Pad Pro is part of the Minus Pad series and builds on the proven Minus Pad 8 to deliver improved thermal conductivity and compressibility while remaining easy to use.

• Excellent thermal conductivity


• Outstanding compressibility


• Easy to use


• Electrically non-conductive


• Suitable for SSDs, GPU coolers, GPU water coolers, voltage regulators and memory modules


• Color: gray

Provides a compressible, electrically isolating interface to enhance thermal contact between components and cooling solutions.

Kabinettvifte, 140mm x 140mm x 25mm (Høyde x Bredde x Dybde), Støynivå maks 27.9 dBa, luftstrøm maks 90.5 CFM, maksimalt statisk trykk 2.9 mmH2O, viftehastighet: 600 - 1600 ±10% RPM, PWM kontrollert, lagertype: Hydro Dynamic Bearing, hovedkortkontakt: 4-pins & RGB-kontakt: 3-pins (5 volt), adresserbart RGB LED-lys, styres av: ASUS AURA / Asrock Polychrome Sync / Gigabyte Fusion / MSI Mystic Light, farge: svart med RGB.

• Omvendt viftebladdesign for visuelle forbedrede lyseffekter for bruk med luftinntak

Requieres HYTE Nexus Portal NP50

Thermal Grizzly presenterar WireView GPU, en enhet för att mäta strömförbrukningen för PCI-expansion och plug-in-kort, som utvecklats i samarbete med Jon „elmor“ Sandström. Samtidigt möjliggör den U-formade designen av adaptern optimerad kabeldragning för ren kabelhantering.

Vad gör WireView GPU?
WireView GPU möjliggör mätning av strömförbrukningen för PCI-expansion och plug-in-kort och loggar dessa data för att fastställa strömförbrukningen. Dessa data kan bland annat användas för att fastställa strömkostnaderna för ett grafikkort eller för att jämföra strömförbrukningen med andra grafikkort - och det ser helt enkelt coolt ut!

- 1 x 12VHPWR -> 3 x 8-Pins PCI-E - omvendt riktning

Spudger for prying og åpning med antistatisk, bøyelig glassfylt nylonkonstruksjon og tosidige flate og spisse ender for sikker arbeid rundt følsomme elektroniske komponenter.

Spudger er et allsidig multiverktøy for å koble fra kontakter, lirke komponenter og assistere ved lodding, og det inkluderer et krokutskjær for håndtering av ledninger.

• Glassfylt nylonkropp for ikke-ledende, bøyelig ytelse


• Flat ende for å koble fra kontakter, fjerne termisk pasta, lirke komponenter og hjelpe ved lodding


• Spiss ende for å koble til/fra komponenter, holde gjenstander ved lodding eller presis poking


• Utskårelse for å hekte og føre ledninger


• Foretrukket glassfylt nylon-alternativ for bruk under lodding

Fungerer rundt følsom kretselektronikk for å hjelpe til med å forhindre støt og riper under delikate reparasjoner.

Thermal Grizzly presenterer WireView GPU, en enhet for å måle strømforbruket til PCI-utvidelse og plug-in-kort, som ble utviklet i samarbeid med Jon „elmor“ Sandström. Samtidig muliggjør den U-formede utformingen av adapteren optimalisert kabelføring for ren kabelhåndtering.

Hva gjør WireView GPU?
WireView GPU muliggjør måling av strømforbruket til PCI-utvidelse og plug-in-kort og logger disse dataene for å bestemme strømforbruket. Disse dataene kan blant annet brukes til å bestemme strømkostnadene til et grafikkort eller til å sammenligne strømforbruket med andre grafikkort – og ser rett og slett kult ut!

- 2 x 8-Pins PCI-E - normal retning

The Montech MKey TKL is a wired mechanical keyboard with an 85-key, tenkeyless layout. It features pre-lubricated Gateron G Pro 2.0 switches housed in a gasket-mounted structure, which is designed to provide a consistent typing feel across the board. The internal assembly includes silicone dampening material to modify the keyboard's acoustic output. Its keycaps are made from PBT plastic with an MDA profile and feature five-sided dye-sublimated legends for resistance to wear. The keyboard connects via a detachable 1.9 m USB Type-C cable.

This model is built for user modification, featuring hot-swappable sockets that permit the installation of compatible mechanical switches without requiring soldering. The keyboard includes per-key RGB backlighting with south-facing LEDs, which can be cycled through 18 different lighting effects. A multi-function rotary knob provides direct control over volume or other programmable functions. The case is equipped with feet that allow for three distinct tilt angles, and the electronics support 100% anti-ghosting to ensure all key presses are registered correctly during use.

Key Features:

• Tenkeyless (TKL) form factor with 85-key QWERTY layout
• Hot-swappable sockets with Gateron G Pro 2.0 mechanical switches
• PBT keycaps with a high-profile MDA design
• Gasket-mounted internal structure with silicone sound dampening
• Per-key RGB backlighting with 18 pre-set modes
• Integrated multi-function rotary control knob
• Three-level adjustable keyboard height
• Wired connectivity via a detachable USB-C cable
   

Water cooler optimized for Intel LGA1851 direct-die mounting with a nickel-plated copper microfin cold plate, low-flow-resistance jet channels and integrated RGB lighting.

The Intel 1851 Mycro Direct-Die Pro RGB V1 is designed to sit directly on a delidded Intel CPU to send heat straight into the water loop, with an acrylic-and-aluminum cover and controllable ARGB illumination.

• Direct-die installation for LGA1851 CPUs — requires removal of the ILM and CPU heatspreader; delidding is at your own risk


• Nickel-plated copper cold plate with microfins and a jet system, engineered for low flow resistance


• Acrylic layer tempered after milling to prevent stress cracks beneath the anodized aluminum lid


• Digital aRGB LEDs under the lid, controllable via a 3-pin ARGB header (+5V/DATA/GND); LEDs also illuminate the G1/4 fittings


• G1/4-inch female threading for standard fittings


• Tested with KryoSheet and thermal pads — additional pad thickness affected contact pressure and showed no significant temperature improvements

Built for users who want a compact direct cooling path from the CPU die into a water loop while retaining customizable RGB lighting.

Thermal Grizzly Minus Pad Extreme is a great choice for applications where renewing thermal paste is not an option. This is particularly useful when distances between the heat source and the heat sink need to be bridged - for example with memory chips and voltage converters. The silicone-based thermal pad has a consistency similar to modeling clay. Compared to Minus pad 8 the thermal conductivity was improved by about 260 %.

• Most excellent thermal conductivity
• No bleeding
• long-term stability
• high compression rate

The minus pad extreme is available in size 120 x 20 mm and 100 x 100 mm with thicknesses of 0,5mm, 1mm, 1,5mm, 2mm, 3mm. See variants for various sizes and thickness. 

NB: Due to the consistency only one-time use is recommended 

Thermal pads offering extremely high thermal conductivity, outstanding compressibility and electrically non-conductive properties for use on SSDs, GPU coolers and electronic components.

The Minus Pad Pro combines excellent heat transfer with exceptional compressibility while remaining electrically non-conductive, making it suitable for cooling SSDs, GPU coolers, GPU water coolers, voltage regulators and memory modules.

• Excellent thermal conductivity


• Outstanding compressibility for tight contact


• Electrically non-conductive for safe use on electronics


• Easy to use


• Designed for SSDs, GPU coolers, GPU water coolers, voltage regulators and memory modules

Based on the proven Minus Pad 8 and developed to further improve thermal conductivity and compressibility for reliable component cooling.

HYTE LS30 Universell LED-stripe

Kabinettvifte, 140mm x 140mm x 25mm (Høyde x Bredde x Dybde), Støynivå maks 27.9 dBa, luftstrøm maks 90.5 CFM, maksimalt statisk trykk 2.9 mmH2O, viftehastighet: 600 - 1600 ±10% RPM, PWM kontrollert, lagertype: Hydro Dynamic Bearing, hovedkortkontakt: 4-pins & RGB-kontakt: 3-pins (5 volt), adresserbart RGB LED-lys, styres av: ASUS AURA / Asrock Polychrome Sync / Gigabyte Fusion / MSI Mystic Light, farge: hvit med RGB.

• Omvendt viftebladdesign for visuelle forbedrede lyseffekter for bruk med luftinntak

HYTE LS10 Universell Lyssett til PC-kabinett

Thermal Grizzly Minus Pad Extreme is a great choice for applications where renewing thermal paste is not an option. This is particularly useful when distances between the heat source and the heat sink need to be bridged - for example with memory chips and voltage converters. The silicone-based thermal pad has a consistency similar to modeling clay. Compared to Minus pad 8 the thermal conductivity was improved by about 260 %.

• Most excellent thermal conductivity
• No bleeding
• long-term stability
• high compression rate

The minus pad extreme is available in size 120 x 20 mm and 100 x 100 mm with thicknesses of 0,5mm, 1mm, 1,5mm, 2mm, 3mm. See variants for various sizes and thickness. 

NB: Due to the consistency only one-time use is recommended 

This is a mesh side panel accessory designed as a direct replacement for the SSUPD Meshroom S and Meshroom D chassis. Its primary function is to enhance thermal performance by substituting a solid or glass panel with a fully ventilated surface. This design facilitates increased airflow directly over heat-generating components, including the processor, graphics card, and storage drives. The construction consists of a fine mesh material set within a rigid frame, ensuring structural integrity while maximizing air exchange.

The Montech MKey Fullsize Freedom is not just a mechanical keyboard – it is a masterpiece of thoughtful design and uncompromising comfort. Pre-installed Gateron G Pro 2.0 switches ensure an exceptionally smooth typing experience, and the high-quality MDA-profiled PBT keycaps feel and look premium.

Inspired by the aesthetics of Osaka Castle, the design makes the keyboard visually striking – the crown jewel of your workspace.

Customization and comfort just for you

MKey offers extensive support for personal customization: hot swap switches allow for quick switch replacement, and 18 dynamic RGB lighting modes add color and ambiance to your workspace. Ergonomic adjustment options, a convenient rotary control, and built-in macro recording ensure that the keyboard adapts perfectly to your needs.

Combining aesthetics and power – the MKey Fullsize Freedom impresses with every keystroke.

Main features:

• Gateron G Pro 2.0 Red for soft keystrokes
• PBT keys with five-sided printing process
• Customizable RGB lightingHot swap switches for easy modification
• Ergonomic design with adjustable angles

Specifications:

• Mechanical keys: Yes
• Switch type: Gateron G Pro 2.0 Red
• Layout: Full-size, Nordic
• Lighting: Yes
• Keycap material: PBT
• N-key rollover: Yes
• Anti-ghosting: YesHot swap: Yes
• Color; Blue

The 12th Gen Lapping-Tool is specially designed for the Intel 12th Gen Contact Frame and simplifies the process of lapping the processor. Using the enclosed screws, the CPU is simply mounted on the Lapping-Tool with the Contact Frame. This simulates the actual final position of the CPU in the socket on the motherboard.

120mm ARGB PWM fan delivering 600–2200 RPM, up to 76.2 CFM airflow and 3.81 mm H2O static pressure for AIO-optimised cooling with a Fluid Dynamic Bearing for quieter, long-lasting operation.

Designed to combine focused cooling and vivid lighting, METAL PRO 12 ARGB PWM pairs high static pressure and PWM control with an 8-LED ARGB ring to improve radiator and component heat dissipation.

• Speed: 600–2200 RPM (±10%)


• Maximum airflow: 76.2 CFM


• Maximum static pressure: 3.81 mm H2O


• Noise level (max): 29.1 dBA


• Fluid Dynamic Bearing for reduced friction and quieter operation


• PWM 4-pin and 5V 3-pin ARGB connectors; 8 vibrant ARGB LEDs


• Cable length: 515 mm

Available in single or 3-in-1 packs and offered in black or white to suit different builds and cooling needs.

Thermal Grizzly Minus Pad Extreme is a great choice for applications where renewing thermal paste is not an option. This is particularly useful when distances between the heat source and the heat sink need to be bridged - for example with memory chips and voltage converters. The silicone-based thermal pad has a consistency similar to modeling clay. Compared to Minus pad 8 the thermal conductivity was improved by about 260 %.

• Most excellent thermal conductivity
• No bleeding
• long-term stability
• high compression rate

The minus pad extreme is available in size 120 x 20 mm and 100 x 100 mm with thicknesses of 0,5mm, 1mm, 1,5mm, 2mm, 3mm. See variants for various sizes and thickness. 

NB: Due to the consistency only one-time use is recommended 

Thermal pads offer extremely high thermal conductivity, outstanding compressibility, electrical insulation, and straightforward installation for efficient component cooling.

The Minus Pad Pro is the Pro-series thermal pad refined from the Minus Pad 8 to deliver improved thermal conductivity and compressibility for SSDs, GPU coolers, water blocks and electronic components.

• Excellent thermal conductivity


• Outstanding compressibility for tight contact


• Electrically non-conductive


• Easy to apply


• Suitable for SSDs, GPU coolers, GPU water coolers, voltage regulators and memory modules

Designed to enhance heat transfer between components and cooling solutions in compact assemblies.

Termisk pute leverer høy kompresjon, svært høy komprimerbarhet og varmeledningsevne i en elektrisk ikke-ledende utforming for enkel installasjon.

Thermal Grizzly Minus Pad High Compression er utviklet for PC-entusiaster og moddere som trenger en fleksibel pute som pålitelig kompenserer for varierende komponenthøyder uten kompliserte målinger, og som kan kuttes til størrelse for et bredt spekter av bygg.

• Høy komprimerbarhet bidrar til å kompensere for høydeforskjeller når den nøyaktige spalten er ukjent
• Utmerket varmeledningsevne støtter effektiv varmeutveksling
• Elektrisk ikke-ledende for å bidra til å forhindre kortslutning i følsom elektronikk
• Allsidig bruk for SSD-er, bærbare PC-er, VRM-er og grafikkort

Ideell for praktiske kjøleoppgraderinger der toleranse, sikkerhet og enkel håndtering er viktig.

Thermal Grizzly Minus Pad Extreme is a great choice for applications where renewing thermal paste is not an option. This is particularly useful when distances between the heat source and the heat sink need to be bridged - for example with memory chips and voltage converters. The silicone-based thermal pad has a consistency similar to modeling clay. Compared to Minus pad 8 the thermal conductivity was improved by about 260 %.

• Most excellent thermal conductivity
• No bleeding
• long-term stability
• high compression rate

The minus pad extreme is available in size 120 x 20 mm and 100 x 100 mm with thicknesses of 0,5mm, 1mm, 1,5mm, 2mm, 3mm. See variants for various sizes and thickness. 

NB: Due to the consistency only one-time use is recommended 

140mm fan delivers 95.61 CFM airflow, 600–1600 RPM PWM control, ARGB lighting and rifle bearing reliability.

The HP140 ARGB PWM pairs 95.61 CFM airflow and 2.95 mm H2O static pressure with 8-LED ARGB lighting to provide effective case cooling and consistent illumination.

• Speed: 600–1600 RPM (±10%)


• Airflow (Max.): 95.61 CFM


• Static Pressure (Max.): 2.95 mm H2O


• Noise Level (Max.): 29.2 dBA


• Rifle bearing with advanced lubrication for extended operation


• Connectors: PWM 4-pin and ARGB 5V 3-pin; 500 mm cable

Available in black or white and offered as single units or 3-in-1 packs to match different build preferences.