Trykkrør & Beslag - side 8

Viega 2416.1

Viega 2416

Press connector system with press connectors made of copper and gunmetal tested in acc. with DVGW worksheet W 534 with DVGW test seal and pipes made of copper in acc. with EN 1057 in acc. with DVGW worksheet GW 392.Suitable for drinking water installations in acc. with DIN 1988.For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber), up to 110 °C

Viega 2416.1

Press connector system with press connectors made of copper and gunmetal tested in acc. with DVGW worksheet W 534 with DVGW test seal and pipes made of copper in acc. with EN 1057 in acc. with DVGW worksheet GW 392.Suitable for drinking water installations in acc. with DIN 1988.For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber), up to 110 °C

Geberit 20305 rørfittings til jord & avløpsrør

Geberit 23307 rørfittings til jord & avløpsrør

Bend w/ plend cst 45g d22 zn-pl

Geberit 23107 rørfittings til jord & avløpsrør

Geberit 20103 rørfittings til jord & avløpsrør

Bendad mt cst 90g d15-r1/2 zn-pl

Geberit 20303 rørfittings til jord & avløpsrør

Geberit 20105 rørfittings til jord & avløpsrør

Geberit 23308 rørfittings til jord & avløpsrør

Geberit 20102 rørfittings til jord & avløpsrør

For varmesystemer, kjøling og industrielle formål. For klimaanlegg. For sprinklersystemer (våte). Ikke egnet for drikkevannsrør.

T-piece cst d15-15-15 zn-pl

Bend cst 45g d22 zn-pl

Bendad ft cst 90g d15-rp1/2 zn-pl

Beslag for galvaniserte stålrør, for varmesystemer.

For cold and hot potable water, For heating water, For cooling water without antifreeze agent, For cooling water with antifreeze agent, For remote network heating water 120 °C, For saturated steam 120 °C, For service water, For ultrapure water (except pharmaceutical water), For rainwater with a pH value of > 6.0, For grey and black water with pH value > 6.0, For extinguishing water (wet), For sprinklers (wet), For chemicals and technical liquids, For compressed air (oil purity class 0–3), For negative pressure, For inert gases (e.g. nitrogen), For industrial gases (e.g. acetylene, shielding gases), For technical building systems, industry and shipbuilding, Application overview: Geberit Mapress Stainless Steel for liquid media, Application overview: Geberit Mapress Stainless Steel for gaseous media.

For sanitære anlegg og industri, for varmesystemer, kjøling og industri.

Geberit 23607 rørfittings til jord & avløpsrør

Adapter mt cst d15-r3/8 zn-pl

For sanitære anlegg og industri, for varmesystemer, kjøling og industri.