Trykkrør & Beslag - side 39

Viega 1112.1

Viega 1115.1

XPress Carbon elbow 45 deg. FF 42

Viega 1117.2XL

Viega 2616.1

Geberit 23308 rørfittings til jord & avløpsrør

Geberit 31321 vannslange kopling Slangekontakt Rustfritt stål 1 stykker

For sanitære anlegg og industri, for varmesystemer, kjøling og industri.

Viega 2218

Viega 2212

For sanitære anlegg og industri, for varmesystemer, kjøling og industri.

XPress Stainless axial compensator FF 28

XPress Stainless reduced T-piece FFF 54X28X54

XPress rustfritt flensadapter PN16 108 DN100

Sanpress Inox Adapter elbow 90° with SC-Contur- steel non-corroding- press connection, Rp-thread, polygonComponentsEPDM sealing elementd: 15, Rp: 12

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Sanpress Inox Plug-in piece- steel non-corroding- plug-in end, Rp-threadComponentsPolygon d: 28, Rp: 34

XPress Stainless reducer FØ 22X54

Geberit Mapress rustfritt stål union med unionsmutter laget av CrNi-stål: d=28mm

Geberit 31458 vannslange kopling Slangekontakt Rustfritt stål 1 stykker

Wavin Tigris K5 pressfittings er designet og utviklet for enkel installasjon, optimalisert gjennomstrømningsytelse med pressede skjøter.

Sanpress XL Adapter with SC-Contur- gunmetal- press connection, R-threadComponentsEPDM sealing element, cutting ringd: 88,9, R: 3

Press connector system with press connectors made of copper and gunmetal tested in acc. with DVGW worksheet W 534 with DVGW test seal and pipes made of copper in acc. with EN 1057 in acc. with DVGW worksheet GW 392.Suitable for drinking water installations in acc. with DIN 1988.For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber), up to 110 °C

Viega 2226XL

Sanpress Inox XL Adapter with SC-Contur- steel non-corroding- press connection, R-threadComponentsEPDM sealing element, cutting ring, separator ring, polygon, VdS certificationd: 76.1, R: 212