Viega Trykkrør & Beslag - side 24

Viega 1115

Viega 2215.5

Viega 2612

Profipress T-stykke med SC-Contur-kobberpresskontakterKomponenterEPDM-tetningsdeler d1: 12, d2: 12, d3: 12

Viega 2226.1

Viega 1111

Viega 2318

Sanpress Inox skyvekobling med SC-Contur- stål som ikke korroderer - trykkontakterKomponenterEPDM tetningselementerd: 54 (VdS-sertifisering)

Sanpress Inox Reducer med SC-Contur-stål som ikke korroderer, plugg-inn ende, trykktilkobling. Komponenter: EPDM tetningselement, VdS-sertifisering. d1: 54, d2: 42

Viega 2212

Press-fitting system comprising copper press fittings and pipes in accordance with DIN EN 1057 and DVGW Code of Practice GW 392, suitable for:

• Gases in accordance with DVGW Code of Practice G 260 for gas installations compliant with DVGW-TRGI 2008 (DVGW Code of Practice G 600) / DVFG-TRF 2012.
• LPG (liquefied petroleum gas) in the gaseous phase for domestic and industrial applications, tested in accordance with DVGW Code of Practice G 5614.
• Heating oil pipelines for heating oil in accordance with DIN 51603-1.
• Diesel fuel pipelines (suction and pressure lines) for diesel fuel in accordance with DIN EN 590, subject to the provisions of the general building authority approval Z-38.4-71.

Viega 1116

Viega 2612

Viega 2211

Sanpress Inox T-stykke med SC-Contur- stål ikke-korrosive- trykk-koblingerKomponenterEPDM tetningselementerd1: 28, d2: 18, d3: 28

Viega 2217.2

Viega 2218

Viega 2317.2

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Sanpress T-stykke med SC-Contur- gunmetal eller silisiumbronse- presskoblinger. Komponenter inkluderer EPDM-tetningselementer. d1: 28, d2: 22, d3: 22

Viega 2626

Prestabo adapter med SC-Contur, galvanisert ikke-legeret stål, trykkforbindelse og Rp-gjenge

Viega 2218

Viega 2215.1

Sanpress Inox XL Reducer with SC-Contur- steel non-corroding- plug-in end, press connectionComponentsEPDM sealing element, cutting ring, separator ring, VdS certification d1: 88,9 d2: 76,1