Viega Trykkrør & Beslag - side 14

Viega 1116XL

Megapress-adapter med SC-Contur for drikkevannsinstallasjon - stålrør i samsvar med DIN EN 10220/10255 med galvanisering i samsvar med DIN EN 10240 - bronse eller silisiumbronse - trykkontakterKomponenterEPDM tetningselement, skjæring ring, separatorringDN: 15, D: 12, d: 15

Viega 4211

Viega 1116

Viega 4212

Megapress Adapter with SC-Contur for drinking water installation- steel pipes in accordance with DIN EN 10220/10255 with galvanizing in accordance with DIN EN 10240- gunmetal or silicium bronze- press connectorsComponentsEPDM sealing elements, cutting ring, separator ringDN: 50, D: 2, d: 54

Viega 1126.1

Press connector system with press connectors made of copper and gunmetal tested in acc. with DVGW worksheet W 534 with DVGW test seal and pipes made of copper in acc. with EN 1057 in acc. with DVGW worksheet GW 392.Suitable for drinking water installations in acc. with DIN 1988.For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber), up to 110 °C

Press connector system with press connectors made of copper and gunmetal tested in acc. with DVGW worksheet W 534 with DVGW test seal and pipes made of copper in acc. with EN 1057 in acc. with DVGW worksheet GW 392.Suitable for drinking water installations in acc. with DIN 1988.For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber), up to 110 °C

Viega 2416.1

Viega 2416.1

Viega 2416.1

Viega 2426

Viega 2415

Press fitting system with copper and redware press fittings, approved according to DVGW worksheet W 534 with DVGW approval and copper pipes according to DIN EN 1057, according to DVGW worksheet W 392.
Suitable for drinking water installations according to DIN 1988.
For dimensionally stable surface-mounted and built-in installations of distribution and riser cables in Viega's complete system.

Viega 2415

Viega 2616.1

Viega 2415.1

Profipress T-stykke med SC-Contur-kobberpresskoblingerKomponenterEPDM-tetningselementer, VdS-sertifiseringd1: 22, d2: 22, d3: 22

Viega 2415.1

Viega 2615

Viega 2415

Viega 2415.2

Viega 2616

Viega 2616